高温结构蠕变疲劳寿命设计方法：从材料到结构

doi:10.3901/JME.2021.16.066

机械工程学报 ›› 2021, Vol. 57 ›› Issue (16): 66-86,105.doi: 10.3901/JME.2021.16.066

• 特邀专刊：先进设计制造技术前沿：重要装备的可靠性保障 • 上一篇下一篇

扫码分享

高温结构蠕变疲劳寿命设计方法：从材料到结构

王润梓¹, 廖鼎², 张显程¹, 朱顺鹏², 涂善东¹, 郭素娟¹

1. 华东理工大学承压系统与安全教育部重点实验室上海 200237;
2. 电子科技大学系统可靠性与安全性研究中心成都 611731

收稿日期:2020-10-27 修回日期:2021-02-26 出版日期:2021-08-20 发布日期:2021-11-16
通讯作者: 张显程(通信作者),男,1979年出生,博士,教授,博士研究生导师。主要研究方向为高温结构长寿命保障理论与技术。E-mail:xczhang@ecust.edu.cn
作者简介:王润梓,男,1991年出生,博士。主要研究方向为蠕变疲劳寿命设计方法。E-mail:rzwang@ecust.edu.cn
基金资助:
国家自然科学基金（52005185，51725503，11872181）、中国博士后科学基金面上（2020M681200）和国家重点研发计划（2018YFC1902404）资助项目。

Creep-fatigue Life Design Methods in High-temperature Structures: From Materials to Components

WANG Runzi¹, LIAO Ding², ZHANG Xiancheng¹, ZHU Shunpeng², TU Shantung¹, GUO Sujuan¹

1. Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology, Shanghai 200237;
2. Center for System Reliability & Safety, University of Electronic Science and Technology of China, Chengdu 611731

Received:2020-10-27 Revised:2021-02-26 Online:2021-08-20 Published:2021-11-16

摘要/Abstract

摘要： 诸多领域中的结构部件长期在高温变载的严苛环境下运行，其服役过程伴随着严重的蠕变疲劳交互作用。面向高温结构长寿命、高可靠服役的迫切需求，蠕变疲劳寿命设计方法日益受到了业界学者们的高度关注。介绍蠕变疲劳交互作用机理，总结复杂蠕变疲劳加载波形下的微观损伤机制。在材料层面，回顾了基于不同理论体系的蠕变疲劳寿命预测方法。在结构层面，重点阐述了多轴应力对蠕变和疲劳损伤的影响并介绍了基于蠕变疲劳损伤交互图的寿命设计方法。此外，介绍从蠕变疲劳裂纹萌生到扩展的蠕变疲劳可靠性分析方法。最后，对本领域今后的发展方向进行了展望。

关键词: 蠕变疲劳, 损伤评定, 寿命设计, 多轴应力, 可靠性

Abstract: Structural components used in many fields operate under harsh environment of high temperatures and cyclic loadings, the service process of which is always associated with serious creep-fatigue interactions. With the urgent demands of long life and high reliability of high-temperature structures, the creep-fatigue life design method has been paid more and more attentions from both engineering and academics. The creep-fatigue interaction is firstly introduced, and microscopic damage mechanisms under complex creep-fatigue loading waveforms are subsequently summarized. At the material level, creep-fatigue life prediction models based on different theoretical methods are reviewed. At the structural level, the effect of multiaxial stress on creep and fatigue damage is clarified and the life design method based on creep-fatigue interaction diagram is elaborated. Moreover, the creep-fatigue reliability analysis method ranging from creep-fatigue crack initiation to propagation is reviewed. Finally, further directions on creep-fatigue study are explored and concluded.

Key words: creep-fatigue, damage assessment, life design, multiaxial stress, reliability method

中图分类号:

O346

王润梓, 廖鼎, 张显程, 朱顺鹏, 涂善东, 郭素娟. 高温结构蠕变疲劳寿命设计方法：从材料到结构[J]. 机械工程学报, 2021, 57(16): 66-86,105.

WANG Runzi, LIAO Ding, ZHANG Xiancheng, ZHU Shunpeng, TU Shantung, GUO Sujuan. Creep-fatigue Life Design Methods in High-temperature Structures: From Materials to Components[J]. Journal of Mechanical Engineering, 2021, 57(16): 66-86,105.

参考文献

[1] GYEKENYESI J Z,MURTHY P L N,MITAL S K. NASA life-component fatigue and creep life prediction program[R]. NASA Technical Memorandum,NASA/TM-2005-3213886,2005.
[2] American Society of Mechanical Engineers. 2013 ASME boiler & pressure vessel code,III-NH,Class 1 components in elevated temperature service[S]. New York:ASME,2013.
[3] R5,Assessment procedure for the high temperature response of structures,Issue 3[S]. Gloucester,UK:British Energy,2014.
[4] RCC-MR,Design and construction rules for mechanical components of FBR nuclear islands[S]. Paris:AFCEN,2007.
[5] TELESMAN J,GABB T P,GHOSN L J,et al. Effect of notches on creep-fatigue behavior of a P/M nickel-based superalloy[J]. International Journal of Fatigue,2016,87:311-325.
[6] 施惠基,马显锋,于涛. 高温结构材料的蠕变和疲劳研究的一些新进展[J]. 固体力学学报,2010,31(6):696-715. SHI Huiji,MA Xianfeng,YU Tao. Some new progresses on the research of creep and fatigue behaviors of high temperature structural materials[J]. Chinese Journal of Solid Mechanics,2010,31(6):696-715.
[7] WEERTMAN J. Steady-state creep through dislocation climb[J]. Journal of Applied Physics,1957,28(3):362-364.
[8] LANGDON T G. Grain boundary sliding as a deformation mechanism during creep[J]. Philosophical Magazine,1970,22(178):689-700.
[9] COBLE R L. A model for boundary diffusion controlled creep in polycrystalline materials[J]. Journal of Applied Physics,1963,34(6):1679-1682.
[10] PRZYBYLA C,PRASANNAVENKATESAN R,SALAJEGHEH N,et al. Microstructure sensitive modeling of high cycle fatigue[J]. International Journal of Fatigue,2010,32(3):512-525.
[11] 李舜酩. 机械疲劳与可靠性设计[M]. 北京:科学出版社,2006. LI Shunming. Mechanical fatigue and reliability design[M]. Beijing:Science Press,2006.
[12] TU S T,ZHANG X C. Fatigue crack initiation mechanisms[J]. Reference Module in Materials Science and Materials Engineering,2016,1:1-23.
[13] SKELTON R P,GANDY D. Creep-fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanisms[J]. Materials at High Temperatures,2008,25(1):27-54.
[14] SKELTON R P,HORTON C A. The effect of thermal ageing and mechanical exposure on low cycle creep-fatigue strength of 316 steel at 625℃[J]. Materials at high Temperatures,1999,16(2):87-97.
[15] SARKAR A,VIJAYANAND V D,PARAMESWARAN P,et al. Influence of prior fatigue cycling on creep behavior of reduced activation ferritic-martensitic steel[J]. Metallurgical and Materials Transactions A,2014,45(7):3023-3035.
[16] LIAO D,ZHU S P,KESHTEGAR B,et al. Probabilistic framework for fatigue life assessment of notched components under size effects[J]. International Journal of Mechanical Sciences,2020,181:105685.
[17] HOLDSWORTH S R. Creep-fatigue interaction in steam power plant materials[C]//Proceedings of the 10th Liège Conference on Materials for Advanced Power Engineering,Liège,Belgium,September 14-17,2014.
[18] 王润梓. 基于能量密度耗散准则的蠕变-疲劳寿命预测方法及应用[D]. 上海:华东理工大学,2019. WANG Runzi. A creep-fatigue life prediction model based on strain energy density exhaustion criterion and its application on aero-engine turbine discs[D]. Shanghai:East China University of Science and Technology,2019.
[19] MILLER D A,PRIEST R H,ELLISON E G. A review of material response and life prediction techniques under fatigue-creep loading conditions[J]. High-temperature Materials and Processes,1984,6(3-4):155-194.
[20] FABREGUE D,BOUAZIZ O,MAIRE E. Effect of viscosity on cavity growth in ductile damage[J]. Mechanics of Materials,2015,89:169-175.
[21] WEN J F,TU S T,XUAN F Z,et al. Effects of stress level and stress state on creep ductility:evaluation of different models[J]. Journal of Materials Science & Technology,2016,32(8):695-704.
[22] PLUMBRIDGE W J. Metallography of high temperature fatigue[M]//High temperature fatigue:Properties and prediction. London:Elsevier Applied Science,1987.
[23] HALES R. A quantitative metallographic assessment of structural degradation of type 316 stainless steel during creep-fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures,1980,3(4):339-356.
[24] YE S,ZHANG C C,ZHANG P Y,et al. Fatigue life prediction of nickel-based GH4169 alloy on the basis of a multi-scale crack propagation approach[J]. Engineering Fracture Mechanics,2018,199:29-40.
[25] WANG R Z,ZHU S P,WANG J,et al. High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy:Damage mechanisms and life assessment[J]. International Journal of Fatigue,2019,118:8-21.
[26] BILLOT T,VILLECHAISE P,JOUIAD M,et al. Creep-fatigue behavior at high temperature of a UDIMET 720 nickel-base superalloy[J]. International Journal of Fatigue,2010,32(5):824-829.
[27] MANNAN S L,VALSAN M. High-temperature low cycle fatigue,creep-fatigue and thermomechanical fatigue of steels and their welds[J]. International Journal of Mechanical Sciences,2006,48(2):160-175.
[28] CHALLENGER K D,MILLER A K,BRINKMAN C R. An explanation for the effects of hold periods on the elevated temperature fatigue behavior of 21/4 Cr-1 Mo steel[J]. Journal of Engineering Materials and Technology,1981,103(1):7-14.
[29] FOURNIER B,SAUZAY M,CAËS C,et al. Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part II:Effect of compressive holding period on fatigue lifetime[J]. International Journal of Fatigue,2008,30(4):663-676.
[30] AOTO K,KOMINE R,UENO F,et al. Creep-fatigue evaluation of normalized and tempered modified 9Cr-1Mo[J]. Nuclear Engineering and Design,1994,153(1):97-110.
[31] WANG R Z,CHEN B,ZHANG X C,et al. The effects of inhomogeneous microstructure and loading waveform on creep-fatigue behaviour in a forged and precipitation hardened nickel-based superalloy[J]. International Journal of Fatigue,2017,97:190-201.
[32] OSTERGREN W J. A damage function and associated failure equations for predicting hold time and frequency effects in elevated temperature,low cycle fatigue[J]. Journal of Testing and Evaluation,1976,4(5):327-339.
[33] YAGUCHI M,YAMAMOTO M,OGATA T. A viscoplastic constitutive model for nickel-base superalloy,part I:Kinematic hardening rule of anisotropic dynamic recovery[J]. International Journal of Plasticity,2002,18(8):1083-1109.
[34] SHANKAR V,VALSAN M,RAO K B,et al. Low cycle fatigue behavior and microstructural evolution of modified 9Cr-1Mo ferritic steel[J]. Materials Science and Engineering:A,2006,437(2):413-422.
[35] DEAN D W,SPINDLER M W,CHEVALIER M,et al. Recent developments in the R5 volume 2/3 procedures for assessing creep-fatigue initiation in defect-free components operating at high temperatures[C]//ASME 2013 Pressure Vessels and Piping Conference,Paris,France,July 14-18,2013.
[36] WONG E H,VAN DRIEL W D,DASGUPTA A,et al. Creep fatigue models of solder joints:A critical review[J]. Microelectronics Reliability,2016,59:1-12.
[37] WANG R Z,WANG J,GONG J G,et al. Creep-fatigue behaviors and life assessments in two nickel-based superalloys[J]. ASME Journal of Pressure Vessel Technology,2018,140(3):031405.
[38] CHARKALUK E,CONSTANTINESCU A. An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron[J]. Materials at high temperatures,2000,17(3):373-380.
[39] CHARKALUK E,BIGNONNET A,CONSTANTINESCU A,et al. Fatigue design of structures under thermomechanical loadings[J]. Fatigue & Fracture of Engineering Materials & Structures,2002,25(12):1199-1206.
[40] SKELTON R P,REES C J,WEBSTER G A. Energy damage summation methods for crack initiation and growth during block loading in high-temperature low-cycle fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures,1996,19(2-3):287-297.
[41] SKELTON R P,LOVEDAY M S. A re-interpretation of the BCR/VAMAS low cycle fatigue intercomparison programme using an energy criterion[J]. Materials at High Temperatures,1997,14(1):53-68.
[42] SKELTON R P. Energy criterion for high temperature low cycle fatigue failure[J]. Materials Science and Technology,1991,7(5):427-440.
[43] KORSUNSKY A M,DINI D,DUNNE F P,et al. Comparative assessment of dissipated energy and other fatigue criteria[J]. International Journal of Fatigue,2007,29(9-11):1990-1995.
[44] ZHU S P,YANG Y J,HUANG H Z,et al. A unified criterion for fatigue-creep life prediction of high temperature components[J]. Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2017,231(4):677-688.
[45] TAHIR F,DAHIRE S,LIU Y. Image-based creep-fatigue damage mechanism investigation of Alloy 617 at 950℃[J]. Materials Science and Engineering:A,2017,679:391-400.
[46] PUJOL J C,PINTO J M. A neural network approach to fatigue life prediction[J]. International Journal of Fatigue,2011,33(3):313-322.
[47] MANSON S S. Thermal stress in design:Cyclic life of ductile materials[J]. Machine Design,1960,32:139-144.
[48] MANSON S S. Interfaces between fatigue,creep,and fracture[J]. International Journal of Fracture Mechanics,1966,2(1):327-384.
[49] MANSON S S,HALFORD G R. A method of estimating high-temperature low-cycle fatigue behavior of materials[C]//Proceedings of International Conference on High-Strain Fatigue,The Metals and Metallurgy Trust,London,UK,1967.
[50] COFFIN L J. Prediction parameters and their application to high temperature low-cycle fatigue[C]//Proceedings of Second International Conference on Fracture,London,UK,1969,56:1-12.
[51] BRINKMAN C R. High-temperature time-dependent fatigue behaviour of several engineering structural alloys[J]. International Metals Reviews,1985,30(1):235-258.
[52] COFFIN L J. The concept of frequency separation in life prediction for time-dependent fatigue[C]//ASME-MPC Symposium on Creep-Fatigue Interaction,MPC-3,American Society for Mechanical Engineers,New York,USA,1976.
[53] RODRIGUEZ P,MANNAN S L. High temperature low cycle fatigue[J]. Sadhana,1995,20(1):123-164.
[54] 董照钦,段作祥,何晋瑞. 应变能-频率分离法及其应用[J]. 航空学报,1985,6(5):461-466. DONG Zhaoqin,DUAN Zuoxiang,HE Jinrui. A strain energy-frequency separation method and its application[J]. Acta Aeronautica ET Astronautica Sinica,1985,6(5):461-466.
[55] 张国栋,苏彬. 高温低周应变疲劳的三参数幂函数能量方法研究[J]. 航空学报,2007,28(2):314-318. ZHANG Guodong,SU Bin. A method based on energy and three-parameter power function for low cycle fatigue[J]. Acta Aeronautica ET Astronautica Sinica,2007,28(2):314-318.
[56] ZHU S P,HUANG H Z. A generalized frequency separation-strain energy damage function model for low cycle fatigue-creep life prediction[J]. Fatigue & Fracture of Engineering Materials & Structures,2010,33(4):227-237.
[57] ZHU S P,HUANG H Z,HE L P,et al. A generalized energy-based fatigue-creep damage parameter for life prediction of turbine disk alloys[J]. Engineering Fracture Mechanics,2012,90:89-100.
[58] ZHU S P,LEI Q,HUANG H Z,et al. Mean stress effect correction in strain energy-based fatigue life prediction of metals[J]. International Journal of Damage Mechanics,2017,26(8):1219-1241.
[59] CHEN L,JIANG J,FAN Z,et al. A new model for life prediction of fatigue-creep interaction[J]. International Journal of Fatigue,2007,29(4):615-619.
[60] FAN Y N,SHI H J,TOKUDA K. A generalized hysteresis energy method for fatigue and creep-fatigue life prediction of 316L(N)[J]. Materials Science and Engineering:A,2015,625:205-212.
[61] MANSON S S,HALFORD G R,HIRSCHBERG M H. Creep fatigue analysis by strain-range partitioning[C]//Proceedings of First Symposium on Design for Elevated Temperature Environment,San Francisco,USA,May 10-12,1971.
[62] HALFORD G R. Fatigue and durability of metals at high temperatures[M]. Ohio:ASM International,2009.
[63] HALFORD G R,SALTSMAN J F. Strain range partitioning-A total strain range version[C]//Proceedings of International Conference on Advances in Life Predition Methods,American can Society of Mechanical Engineers,New York,USA,April 18-21,1983.
[64] 何晋瑞,段作祥,宁有连,等. 应变能区分法及其对GH33A与1Cr18Ni9Ti的应用[J]. 金属学报,1985,21(1):54-63. HE Jinrui,DUAN Zuoxiang,NING Youlian,et al. Strain energy partitioning and its application to GH33A Ni-based superalloy and 1Cr18Ni9Ti stainless steel[J]. Acta Metallurgica Sinica,1985,21(1):54-63.
[65] 胡绪腾,宋迎东. 总应变-应变能区分法[J]. 机械工程学报,2007,43(2):219-224. HU Xuteng,SONG Yingdong. Total strain version of strain energy partitioning[J]. Journal of Mechanical Engineering,2007,43(2):219-224.
[66] ROBINSON E L. Effect of temperature variation on the long-time rupture strength of steels[J]. ASME Transactions,1952,74:777-781.
[67] PRIEST R H,ELLISON E G. A combined deformation map-ductility exhaustion approach to creep-fatigue analysis[J]. Materials Science and Engineering,1981,49(1):7-17.
[68] HALES R. A method of creep damage summation based on accumulated strain for the assessment of creep-fatigue endurance[J]. Fatigue & Fracture of Engineering Materials & Structures,1983,6(2):121-135.
[69] HALES R. The role of cavity growth mechanisms in determining creep-rupture under multiaxial stresses[J]. Fatigue & Fracture of Engineering Materials & Structures,1994,17(5):579-591.
[70] ZHU S P,HUANG H Z,LIU Y,et al. An efficient life prediction methodology for low cycle fatigue-creep based on ductility exhaustion theory[J]. International Journal of Damage Mechanics,2013,22(4):556-571.
[71] SPINDLER M W,PAYTEN W. Advanced ductility exhaustion methods for the calculation of creep damage during creep-fatigue cycling[J]. Journal of ASTM International,2011,8(7):1-19.
[72] SPINDLER M W. The prediction of creep damage in Type 347 weld metal:Part II:creep fatigue tests[J]. International Journal of Pressure Vessels and Piping,2005,82(3):185-194.
[73] SPINDLER M W. An improved method for calculation of creep damage during creep-fatigue cycling[J]. Materials Science and Technology,2007,23(12):1461-1470.
[74] TAKAHASHI Y. Further evaluation of creep-fatigue life prediction methods for low-carbon nitrogen-added 316 stainless steel[J]. Journal of Pressure Vessel Technology,1999,121(2):142-148.
[75] TAKAHASHI Y,SHIBAMOTO H,INOUE K. Study on creep-fatigue life prediction methods for low-carbon nitrogen-controlled 316 stainless steel (316FR)[J]. Nuclear Engineering and Design,2008,238(2):322-335.
[76] TAKAHASHI Y. Study on creep-fatigue evaluation procedures for high-chromium steels-Part I:Test results and life prediction based on measured stress relaxation[J]. International Journal of Pressure Vessels and Piping,2008,85(6):406-422.
[77] TAKAHASHI Y. Study on creep-fatigue evaluation procedures for high chromium steels-Part II:Sensitivity to calculated deformation[J]. International Journal of Pressure Vessels and Piping,2008,85(6):406-422.
[78] SKELTON R P. The energy density exhaustion method for assessing the creep-fatigue lives of specimens and components[J]. Materials at High Temperatures,2013,30(3):183-201.
[79] TAKAHASHI Y. Effect of cyclic loading on subsequent creep behaviour and its implications in creep-fatigue life assessment[J]. Materials at High Temperatures,2015,32(5):492-501.
[80] WANG R Z,ZHANG X C,TU S T,et al. A modified strain energy density exhaustion model for creep-fatigue life prediction[J]. International Journal of Fatigue,2016,90:12-22.
[81] PAYTEN W M,DEAN D W,SNOWDEN K U. A strain energy density method for the prediction of creep-fatigue damage in high temperature components[J]. Materials Science and Engineering:A,2010,527(7-8):1920-1925.
[82] CHEN H,PONTER A R. A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading[J]. European Journal of Mechanics-A/Solids,2001,20(4):555-571.
[83] CHEN H,PONTER A R. Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading[J]. International Journal for Numerical Methods in Engineering,2006,68(1):13-32.
[84] CHEN H,PONTER A R. A direct method on the evaluation of ratchet limit[J]. ASME Journal of Pressure Vessel Technology,2010,132(4):041202.
[85] CHEN H,CHEN W,URE J. A direct method on the evaluation of cyclic steady state of structures with creep effect[J]. ASME Journal of Pressure Vessel Technology,2014,136(6):061404.
[86] CHABOCHE J L. A review of some plasticity and viscoplasticity constitutive theories[J]. International Journal of Plasticity,2008,24(10):1642-1693.
[87] YAGUCHI M,YAMAMOTO M,OGATA T. A viscoplastic constitutive model for nickel-base superalloy,part I:Kinematic hardening rule of anisotropic dynamic recovery[J]. International Journal of Plasticity,2002,18(8):1083-1109.
[88] AHMED R,BARRETT P R,HASSAN T. Unified viscoplasticity modeling for isothermal low-cycle fatigue and fatigue-creep stress-strain responses of Haynes 230[J]. International Journal of Solids and Structures,2016,88:131-145.
[89] ZHANG S L,XUAN F Z. Interaction of cyclic softening and stress relaxation of 9-12% Cr steel under strain-controlled fatigue-creep condition:experimental and modeling[J]. International Journal of Plasticity,2017,98:45-64.
[90] WANG R Z,GUO S J,CHEN H,et al. Multi-axial creep-fatigue life prediction considering history-dependent damage evolution:A new numerical procedure and experimental validation[J]. Journal of the Mechanics and Physics of Solids,2019,131:313-336.
[91] KOBAYASHI M,MUKAI M,TAKAHASHI H,et al. Implicit integration and consistent tangent modulus of a time-dependent non-unified constitutive model[J]. International Journal for Numerical Methods in Engineering,2003,58(10):1523-1543.
[92] CHEN W,WANG F,FENG M. Study of a modified non-unified model for time-dependent behavior of metal materials[J]. Mechanics of Materials,2017,113:69-76.
[93] LIAO D,ZHU S P,CORREIA J A F O,et al. Recent advances on notch effects in metal fatigue:A review[J]. Fatigue & Fracture of Engineering Materials & Structures,2020,43:637-659.
[94] SOCIE D F,MARQUIS G B. Multiaxial fatigue[M]. Warrendale:Society of Automotive Engineers,2000.
[95] LIAO D,ZHU S P,CORREIA J A F O,et al. Computational framework for multiaxial fatigue life prediction of compressor discs considering notch effects[J]. Engineering Fracture Mechanics,2018,202:423-435.
[96] LIAO D,ZHU S P. Energy field intensity approach for notch fatigue analysis[J]. International Journal of Fatigue,2019,127:190-202.
[97] LIAO D,ZHU S P,QIAN G. Multiaxial fatigue analysis of notched components using a combined critical plane and critical distance approach[J]. International Journal of Mechanical Sciences,2019,160:38-50.
[98] ZHU S P,YU Z Y,CORREIA J A F O,et al. Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials[J]. International Journal of Fatigue,2018,112:279-288.
[99] CHO N K,WANG R Z,MA Z,et al. Creep-fatigue endurance of a superheater tube plate under non-isothermal loading and multi-dwell condition[J]. International Journal of Mechanical Sciences,2019,161:105048.
[100] WANG R Z,ZHANG X C,GONG J G,et al. Creep-fatigue life prediction and interaction diagram in nickel-based GH4169 superalloy at 650℃ based on cycle-by-cycle concept[J]. International Journal of Fatigue,2017,97:114-123.
[101] WU X. A model of nonlinear fatigue-creep (dwell) interactions[J]. Journal of Engineering for Gas Turbines and Power,2009,131(3):032101.
[102] HUANG X,WANG L,HU Y,et al. Fatigue crack propagation behavior of Ni-based superalloys after overloading at elevated temperatures[J]. Progress in Natural Science:Materials International,2016,26(2):197-203.
[103] SKELTON R P. Creep-fatigue interactions (crack initiation)[J]. Comprehensive Structural Integrity,2003,5:25-112.
[104] ZHU S P,LIU Q,PENG W,et al. Computational-experimental approaches for fatigue reliability assessment of turbine bladed disks[J]. International Journal of Mechanical Sciences,2018,142-143:502-517.
[105] NIU X P,WANG R Z,LIAO D,et al. Probabilistic modeling of uncertainties in fatigue reliability analysis of turbine bladed disks[J]. International Journal of Fatigue,2020,142:105912.
[106] ZHU S P,LIU Q,ZHOU J,et al. Fatigue reliability assessment of turbine discs under multi-source uncertainties. Fatigue & Fracture of Engineering Materials & Structures,2018,41(6):1291-1305.
[107] ZHU S P,LIU Q,LEI Q,et al. Probabilistic fatigue life prediction and reliability assessment of a high pressure turbine disc considering load variations[J]. International Journal of Damage Mechanics,2018,27(10):1569-1588.
[108] FREUDENTAL A M. Aspects of reliability under conditions of elevated temperature creep and fatigue[C]//Proceedings of the Third Symposium on Naval Structural Mechanics,New York,USA,January 23-25,1964.
[109] FREUDENTAL A M. Reliability of reactor components and systems subject to fatigue and creep[J]. Nuclear Engineering and Design,1974,28(2):196-217.
[110] HELLER R,THANGJITHAM S. Probabilistic service life prediction for creep-fatigue interaction[C/CD]//Proceedings of the 37th Structure,Structural Dynamics and Materials Conference,Salt Lake City,UT,USA,April 15-17,1996.
[111] HARLOW D G,DELPH T J. Probabilistic service life prediction for creep-fatigue interaction[J]. Journal of Pressure Vessel Technology,1997,119:45-51.
[112] 薛红军,吕国志. 基于寿命-时间分数法计算蠕变疲劳的失效概率[J]. 机械强度,2002,24(1):116-119. XUE Hongjun,LÜ Guozhi. Estimation of failure probability for creep-fatigue failure based on the life-time method[J]. Journal of Mechanical Strength,2002,24(1):116-119.
[113] 陆山,高鹏. 考虑应力松弛的涡轮盘蠕变-疲劳寿命可靠性分析方法[J]. 推进技术,2009,30(3):352-354. LU Shan,GAO Peng. Reliability analysis method for creep-fatigue life of turbine discs with effect of stress relaxation[J]. Journal of Propulsion Technology,2009,30(3):352-354.
[114] TOMEVENYA K M,LIU S. Probabilistic fatigue-creep life reliability assessment of aircraft turbine disk[J]. Journal of Mechanical Science and Technology,2018,32(11):5127-5132.
[115] MAO H,MAHADEVAN S. Reliability analysis of creep-fatigue failure[J]. International Journal of Fatigue,2000,22(9):789-797.
[116] MAHADEVAN S,MAO H,GHIOCEL D. Probabilistic simulation of engine blade creep-fatigue life[C/CD]//Proceedings of the 43rd AIAA/ASME/ASCE/AHS/ASC Structures,Structural Dynamics,and Materials Conference,Denver,Colorado,USA,April 22-25,2002.
[117] MAHADEVAN S,MAO H. Probabilistic fatigue-creep life prediction of composites[J]. Journal of Rnforced Plastics & Composites,2004,23(4):361-371.
[118] 袁修开,吕震宙. 可靠性敏度分析方法及其在非线性蠕变疲劳失效模型中的应用[J]. 计算力学学报,2007,24(1):69-73. YUAN Xiukai,LÜ Zhenzhou. Reliability sensitivity algorithm and its application in creep/fatigue failure[J]. Chinese Journal of Computational Mechanics,2007,24(1):69-73.
[119] JI D M,SHEN M H H,WANG D X,et al. Creep-fatigue life prediction and reliability analysis of P91 steel based on applied mechanical work density[J]. Journal of Materials Engineering and Performance,2015,24:194-201.
[120] HU D,MA Q,SHANG L,et al. Creep-fatigue behavior of turbine disc of superalloy GH720Li at 650℃ and probabilistic creep-fatigue modeling[J]. Materials Science & Engineering A,2016,670:17-25.
[121] WANG Y,DU W,LUO Y. A mean plastic strain fatigue-creep life prediction and reliability analysis of AISI H13 based on energy method[J]. Journal of Materials Research,2017,32(22):4254-4262.
[122] 纪冬梅,郭恒超,任建兴,等. 基于应变能密度的P92钢蠕变-疲劳寿命可靠性模型研究[J]. 动力工程学报,2018,38(12):1022-1029. JI Dongmei,GUO Hengchao,REN Jianxing,et al. Research on reliability model for creep-fatigue life prediction of P92 steel based on strain energy density[J]. Journal of Chinese Society of Power Engineering,2018,38(12):1022-1029.
[123] DOH J,BYUN J,LEE J. Bayesian approach for the lethargy coefficient estimation in the probabilistic creep-fatigue life model[J]. Journal of Computational Design and Engineering,2018,5(2):191-197.
[124] 高鹏. 涡轮盘蠕变及低周疲劳寿命可靠性分析方法[D]. 西安:西北工业大学,2007. GAO Peng. Creep and low cycle fatigue life reliability analysis method of turbine disc[D]. Xi'an:Northwestern Polytechnical University,2007.
[125] 胡殿印,王荣桥,洪杰,等. GH30合金疲劳-蠕变概率模型的研究[J]. 航空动力学报,2008,23(4):742-746. HU Dianyin,WANG Rongqiao,HONG Jie,et al. Investigation on probabilistic model for fatigue-creep failure of alloy GH30[J]. Journal of Aerospace Power,2008,23(4):742-746.
[126] ZHANG C,YUAN Z,WANG Z,et al. Probabilistic fatigue/creep optimization of turbine bladed disk with fuzzy multi-extremum response surface method[J]. Materials,2019,12(20):3367.
[127] KITAMURA T,GHOSN LOUIS J,OHTANI R. Stochastic modeling of crack initiation and short-crack growth under creep and creep-fatigue conditions[J]. Journal of Applied Mechanics,1992,59:S35-S42.
[128] DOGAN B,CEYHAN U,KOROUS J,et al. Sources of scatter in creep fatigue crack growth testing and their impact on plant assessment[J]. Welding in the World,2007,51:35-46.
[129] HU D,WANG R. Experimental investigation on stochastic crack growth model of GH4133B at fatigue-creep[C]//Proceedings of ASME Turbo Expo 2009:Power for Land,Sea and Air,Orlando,FL,USA,April 15-17,2009.
[130] HU D,WANG R,FAN J,et al. Probabilistic analysis on crack growth life of turbine disk under LCF-creep through experimental data[C/CD]//Proceedings of the 27th International Congress of The Aeronautical Sciences,Nice,France,September 19-26,2010.
[131] WEI Z,YANG F,LIN B,et al. Deterministic and probabilistic creep-fatigue-oxidation crack growth modeling[J]. Probabilistic Engineering Mechanics,2013,33:126-134.
[132] VOJDANI A,FARRAHI G H,MEHMANPARAST A,et al. Probabilistic assessment of creep-fatigue crack propagation in austenitic stainless steel cracked plates[J]. Engineering Fracture Mechanics,2018,200:50-63.
[133] VOJDANI A,FARRAHI G H. Reliability assessment of cracked pipes subjected to creep-fatigue loading[J]. Theoretical and Applied Fracture Mechanics,2019,104:102333.

高温结构蠕变疲劳寿命设计方法：从材料到结构

Creep-fatigue Life Design Methods in High-temperature Structures: From Materials to Components

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈东宁, 刘一丹, 姚成玉, 杨晓荣. 多阶段自适应蝙蝠-蚁群混合群智能算法[J]. 机械工程学报, 2021, 57(6): 236-248.
[2]	尹敏轩, 朱涛, 杨冰, 徐京涛, 王超, 肖守讷. 基于可靠性的重载货车钩舌疲劳断裂寿命[J]. 机械工程学报, 2021, 57(4): 210-218.
[3]	徐敬友, 丁坚勇, 杨东俊, 肖彦娟, 杨洁, 涂智福. 基于图论及网络等值的配电网可靠性评估方法^*[J]. 电气工程学报, 2021, 16(3): 92-98.
[4]	尹源, 黄伟峰, 刘向锋, 刘莹, 王玉明, 李鲲. 机械密封智能化的技术基础和发展趋势[J]. 机械工程学报, 2021, 57(3): 116-128.
[5]	王嘉, 张云安, 韩旭. 基于互依关系的退化与随机冲击建模研究[J]. 机械工程学报, 2021, 57(2): 230-238.
[6]	李飞飞, 宋勇, 刘超, 李博, 张世伟. 板带力学性能预报的集成学习模型及其可靠性评价[J]. 机械工程学报, 2021, 57(2): 239-246.
[7]	刘胜利, 王兴东, 孔建益, 曾婷, 唐伟. 多源不确定性下平面变胞机构运动可靠性分析[J]. 机械工程学报, 2021, 57(17): 64-75.
[8]	赵丙峰, 廖鼎, 朱顺鹏, 谢里阳. 机械结构概率疲劳寿命预测研究进展[J]. 机械工程学报, 2021, 57(16): 173-184,197.
[9]	陈志文, 梅云辉, 刘胜, 李辉, 刘俐, 雷翔, 周颖, 高翔. 电子封装可靠性：过去、现在及未来[J]. 机械工程学报, 2021, 57(16): 248-268.
[10]	房芳, 郑辉, 汪玉, 邱雷. 机械结构健康监测综述[J]. 机械工程学报, 2021, 57(16): 269-292.
[11]	赵礼辉, 王震, 冯金芝, 郑松林, 宁欣. 基于用户大数据的电动汽车驱动系统可靠性试验循环工况构建方法[J]. 机械工程学报, 2021, 57(14): 129-140.
[12]	郑宏伟, 孟广伟, 李锋, 郭亚明, 宣默涵, 赵卫东, 王宇. 基于高阶矩最大熵方法的结构混合可靠性分析[J]. 机械工程学报, 2021, 57(14): 282-290,303.
[13]	汪亚顺, 张书锋, 陈循. 机电设备可靠性验证试验统计方案设计方法研究[J]. 机械工程学报, 2021, 57(12): 247-257.
[14]	李彦锋, 黄洪钟, 黄意贤. 太阳翼驱动机构的故障模式影响分析与时变可靠性研究[J]. 机械工程学报, 2020, 56(5): 108-115.
[15]	雷政, 王启明, 甘恒谦, 朱明, 姜鹏. FAST液压促动器过滤系统[J]. 机械工程学报, 2020, 56(4): 218-223.