4D打印热塑性聚氨酯/钕铁硼磁性复合材料成形工艺与性能研究

doi:10.3901/JME.2020.15.080

机械工程学报 ›› 2020, Vol. 56 ›› Issue (15): 80-89.doi: 10.3901/JME.2020.15.080

• 特邀专栏：4D打印技术 • 上一篇下一篇

扫码分享

4D打印热塑性聚氨酯/钕铁硼磁性复合材料成形工艺与性能研究

张策, 伍宏志, 闫春泽

华中科技大学材料成形与模具技术国家重点实验室武汉 430074

收稿日期:2019-09-11 修回日期:2019-12-24 出版日期:2020-08-05 发布日期:2020-10-19
通讯作者: 闫春泽(通信作者),男,1975年出生,博士,教授,博士研究生导师。主要研究方向为4D打印和增材制造。E-mail:c_yan@hust.edu.cn
作者简介:张策,男,1996年出生。主要研究方向为高分子材料和增材制造。E-mail:710715149@qq.com
基金资助:
国家重点研发计划（2018YFB1106700）、华中科技大学学术前沿青年团队（2018QYTD04）、湖北省技术创新专项（2017AAA109）、武汉市国际科技合作计划（2017030209020252）和华中科技大学研究生创新创业基金（2019ygscxcy045）资助项目。

Research on Processing and Properties of 4D Printed Thermoplastic Polyurethane/NdFeB Magnetic Composites

ZHANG Ce, WU Hongzhi, YAN Chunze

State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074

Received:2019-09-11 Revised:2019-12-24 Online:2020-08-05 Published:2020-10-19

摘要/Abstract

摘要： 传统的3D打印技术逐渐无法满足高端制造领域对构件的要求，材料-结构-功能一体化增材制造即4D打印技术将是新的发展方向。为此，选取热塑性聚氨酯（TPU）/钕铁硼（NdFeB）磁性复合材料体系，采用激光选区烧结（Selective laser sintering，SLS）工艺成形具有不同NdFeB含量的复合材料成形件，研究了复合粉末的粒度及其分布、微观形貌、成形前后化学基团演变，成形件晶体结构、力学性能及变形行为，结果表明NdFeB含量会影响复合材料成形件的力学性能和变形行为，增加NdFeB含量能够增大成形件在磁场中受到的作用力；当NdFeB含量在复合材料中质量分数为30%时，复合材料成形件拥有最佳的拉伸强度。本研究将TPU/NdFeB复合材料体系作为一种创新的4D打印材料，成形的磁性智能构件在磁场中发生变形，实现了磁场驱动的4D打印，对4D打印磁性智能构件的发展具有指导意义。

关键词: 4D打印, 激光选区烧结, 磁性材料, 聚合物复合材料

Abstract: It is gradually unable for the traditional 3D printing technology to meet the requirements of components in the high-end manufacturing field. The material-structure-functional integrated additive manufacturing, that is, 4D printing technology will be a new development direction. Therefore, in this work, the thermoplastic polyurethane(TPU)/NdFeB magnetic composite is applied into the selective laser sintering (SLS) process to fabricate parts with different NdFeB content. The particle size and its distribution and micromorphology of the composite powder are investigated. The chemical group evolution before and after forming, crystal structure, mechanical properties and deformation behavior of the SLS printed parts are also studied. The results show that the NdFeB content have influence on the mechanical properties and deformation behavior of the composite parts. The force exerted on the composite parts enhances with the increase of NdFeB content. The fabricated part with 30 wt% NdFeB have the best tensile strength. In this study, the TPU/NdFeB composite material system is used as an innovative 4D printing material. The formed magnetic intelligent component can deform when exposed to magnetic field, which indicate the magnetic field driven 4D printing is realized. As a result, this work has guiding significance for the development of 4D printed magnetic intelligent components.

Key words: 4D printing, selective laser sintering, magnetic material, polymer composite

中图分类号:

TG156

张策, 伍宏志, 闫春泽. 4D打印热塑性聚氨酯/钕铁硼磁性复合材料成形工艺与性能研究[J]. 机械工程学报, 2020, 56(15): 80-89.

ZHANG Ce, WU Hongzhi, YAN Chunze. Research on Processing and Properties of 4D Printed Thermoplastic Polyurethane/NdFeB Magnetic Composites[J]. Journal of Mechanical Engineering, 2020, 56(15): 80-89.

参考文献

[1] 闫春泽. 聚合物及其复合粉末的制备与选择性激光烧结成形研究[D]. 武汉:华中科技大学,2009. YAN Chunze. Preparation and selective laser sintering of polymers and their composite powders[D]. Wuhan:Huazhong University of Science and Technology,2009.
[2] 朱伟. 非金属复合材料激光选区烧结制备与成形研究[D]. 武汉:华中科技大学,2018. ZHU Wei. Preparation and forming of laser selective sintering of non-metal composites[D]. Wuhan:Huazhong University of Science and Technology,2018.
[3] MOMENI F,M.MEHDI HASSANI N S,LIU X,et al. A review of 4D printing[J]. Materials & Design,2017,122:42-79.
[4] KHOO Z X,TEOH J E M,LIU Y,et al. 3D printing of smart materials:A review on recent progresses in 4D printing[J]. Virtual and Physical Prototyping,2015,10(3):103-122.
[5] KUANG Xiao,WU Jiangtao,CRAIG M,et al. Advances in 4D printing:Materials and applications[J]. Advanced Functional Materials,2019,29(2):1805290.
[6] 李涤尘,刘佳煜,王延杰,等. 4D打印-智能材料的增材制造技术[J]. 机电工程技术,2014,43(5):1-9. LI Dichen,LIU Jiawei,WANG Yanjie,et al. 4D printing-additive manufacturing technology for intelligent materials[J]. Electromechanical Engineering Technology,2014,43(5):1-9.
[7] 陈花玲,罗斌,朱子才,等. 4D打印-智能材料与结构增材制造技术研究进展[J]. 西安交通大学学报,2018,52(2):1-12. CHEN Hualing,LUO Bin,ZHU Zicai,et al. Research progress of 4D printing-intelligent materials and structural additive manufacturing technology[J]. Journal of Xi'an Jiaotong University,2018,52(2):1-12.
[8] 魏洪秋,万雪,刘彦菊,等. 4D打印形状记忆聚合物材料的研究现状与应用前景[J]. 中国科学:技术科学,48(1):1-16. WEI Hongqiu,WAN Xue,LIU Yanju,et al. 4D printing of shape memory polymers:Research status and application prospects[J]. Scientia Sinica Technologica,2018,48(1):1-16.
[9] TIBBITS S. 4D printing:Multi-material shape change[J]. Architectural Design,2013,84(1):116-121.
[10] WU H,CHEN P,YAN C,et al. Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing[J]. Materials & Design,2019,171.
[11] HUANG L,JIANG R,WU J,et al. Ultrafast digital printing toward 4D shape changing materials[J]. Adv. Mater.,2017,29(7):1605390.
[12] MIAO S,ZHU W,CASTRO N J,et al. 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate[J]. Science Report,2016,6:27226.
[13] YANG Y,CHEN Y,WEI Y,et al. 3D printing of shape memory polymer for functional part fabrication[J]. The International Journal of Advanced Manufacturing Technology,2015,84(9-12):2079-2095.
[14] YANG W,LU H,HUANG W,et al. Advanced shape memory technology to reshape product design,manufacturing and recycling[J]. Polymers,2014,6(8):2287-2308.

4D打印热塑性聚氨酯/钕铁硼磁性复合材料成形工艺与性能研究

Research on Processing and Properties of 4D Printed Thermoplastic Polyurethane/NdFeB Magnetic Composites

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价

[1]	焦敬品, 常予, 李光海, 吴斌, 何存富. 铁磁性材料早期疲劳损伤磁混频检测方法[J]. 机械工程学报, 2020, 56(4): 25-34.
[2]	史玉升, 伍宏志, 闫春泽, 杨潇, 陈道兵, 张策, 苏彬, 宋波, 李中伟, 庞盛永, 文世峰, 梁波, 赵清亮, 贺健康, 张述泉, 温银堂. 4D打印——智能构件的增材制造技术[J]. 机械工程学报, 2020, 56(15): 1-25.
[3]	高一聪, 曾思远, 冯毅雄, 郑浩, 邱浩, 谭建荣. 支持4D打印的可控变形结构设计研究进展[J]. 机械工程学报, 2020, 56(15): 26-38.
[4]	黄忠意, 杨浴光, 吕鹏宇, 段慧玲. 基于4D打印技术的水陆两栖机器人运动功能转换及控制[J]. 机械工程学报, 2020, 56(15): 39-45.
[5]	卢海洲, 马宏伟, 罗炫, 杨超, 李元元. 激光扫描速度对4D打印钛镍形状记忆合金相转变和超弹性的影响[J]. 机械工程学报, 2020, 56(15): 65-71.
[6]	王闯, 刘振宇, 段桂芳, 谭建荣. 面向4D打印双层结构自弯曲的变形激励源布局设计[J]. 机械工程学报, 2020, 56(15): 72-79.
[7]	黄小康, 田小永, 田晓阳, 曹毅, 同治强, 李涤尘. 基于分区域控制的大型SLS装备预热策略研究[J]. 机械工程学报, 2018, 54(7): 160-166.
[8]	文聘, 叶红玲, 杨庆生. 激光选区烧结马氏体时效钢多孔框架的微结构缺陷及力学性能影响分析[J]. 机械工程学报, 2018, 54(17): 173-180.
[9]	马伟明. 舰船综合电力系统中的机电能量转换技术[J]. 电气工程学报, 2015, 10(4): 3-10.
[10]	郭会茹;吴勇波;焦黎;曹建国;李亚国. Ni-P镀层的磁性混合流体抛光[J]. , 2013, 49(17): 73-78.
[11]	李湘生;史玉升;黄树槐. 激光选区烧结成形机的粉末预热研究[J]. , 2002, 38(3): 94-98.