Mg97Zn1Y2镁合金的高温磨损行为

doi:10.3901/JME.2019.24.066

机械工程学报 ›› 2019, Vol. 55 ›› Issue (24): 66-71.doi: 10.3901/JME.2019.24.066

Mg97Zn1Y2镁合金的高温磨损行为

冯昌青¹, 赵伟¹, 孙元², 安健¹

1. 吉林大学材料科学与工程学院长春 130022;
2. 吉林大学公共计算机教学与研究中心长春 130022

收稿日期:2019-03-12 修回日期:2019-08-16 出版日期:2020-12-20 发布日期:2020-02-18
通讯作者: 安健(通信作者),男,1965年出生,博士,教授,博士研究生导师。主要研究方向为金属及复合材料的摩擦磨损。E-mail:anjian@jlu.edu.cn
作者简介:冯昌青,男,1992年出生,硕士研究生。主要研究方向为镁合金摩擦磨损。E-mail:fengcq17@163.com;赵伟,男,1994年出生,硕士研究生。主要研究方向为镁合金摩擦磨损。E-mail:15764338771@163.com
基金资助:
国家自然科学基金资助项目（51775226）。

High Temperature Wear Behavior of Mg97Zn1Y2 Magnesium Alloy

FENG Changqing¹, ZHAO Wei¹, SUN Yuan², AN Jian¹

1. College of Materials Science and Engineering, Jilin University, Changchun 130022;
2. Public Computer Education and Research Center, Jilin University, Changchun 130022

Received:2019-03-12 Revised:2019-08-16 Online:2020-12-20 Published:2020-02-18

摘要/Abstract

摘要： 对Mg97Zn1Y2合金的室温磨损行为已有研究，但是缺乏高温磨损研究，探究该合金高温磨损行为是非常必要的。采用MG-2000型销-盘磨损试验机对Mg97Zn1Y2合金进行磨损试验，试验温度范围为20~200℃，加载范围为20~320 N，探究不同温度以及载荷对Mg97Zn1Y2合金磨损行为的影响。根据试验数据绘制不同温度下的磨损率曲线；应用SEM观察磨损表面形貌，应用EDS分析磨损表面的化学成分，划分磨损区间。结果表明：随着温度的升高，Mg97Zn1Y2合金的磨损率随载荷的增加而上升得更加显著，磨损行为可以分为轻微磨损和严重磨损两个阶段：轻微磨损阶段的磨损机制为：磨粒磨损、剥层磨损、氧化磨损；严重磨损阶段为严重的塑性变形和表面熔化。绘制了磨损机制转变图，划分该合金的安全工作区间，为该合金在高温下的摩擦学应用提供有益参考。

关键词: 镁合金, 高温磨损, 磨损机制, 磨损转变图

Abstract: There exists detailed investigation on wear behaviour of Mg97Zn1Y2 alloy at room temperature, while its wear behaviour at elevated temperatures is absent. It is of interest to study the wear behaviour of the alloy at elevated temperatures. The wear tests of Mg97Zn1Y2 alloy are carried out on MG-2000 pin-disk wear tester. The test temperature range is 20-200℃ and the loading range is 20-320N. The effects of different temperatures and loads on the wear behavior of Mg97Zn1Y2 alloy are investigated. The wear rate curves at different temperatures are plotted according to the test data. The wear surface morphologies are observed by SEM, and the chemical compositions of the wear surfaces are analyzed by EDS to identify the wear mechanisms. The results show that the wear rate of Mg97Zn1Y2 alloy increases with the increase of temperature. The wear behavior can be divided into two stages:mild wear and severe wear. The wear mechanisms at mild wear stage are abrasion, oxidative wear, delamination, while the wear mechanisms at severe wear stage are severe plastic deformation and surface melting. A wear mechanism transition map is drawn to indicate the safe operating region of the alloy, which can provides useful reference for tribologial applications of the alloy at elevated temperature.

Key words: magnesium alloy, high temperature wear, wear mechanism, wear transition diagram

中图分类号:

TH117

冯昌青, 赵伟, 孙元, 安健. Mg97Zn1Y2镁合金的高温磨损行为[J]. 机械工程学报, 2019, 55(24): 66-71.

FENG Changqing, ZHAO Wei, SUN Yuan, AN Jian. High Temperature Wear Behavior of Mg97Zn1Y2 Magnesium Alloy[J]. Journal of Mechanical Engineering, 2019, 55(24): 66-71.

参考文献

[1] ALIZADEH R, MAHMUDI R, NGAN A H W, et al. Microstructural stability and grain growth kinetics in an extruded fine-grained Mg-Gd-Y-Zr alloy[J]. Journal of Materials Science, 2015, 50(14):4940-4951.
[2] 陈振华. 耐热镁合金[M]. 北京:化学工业出版社, 2006. CHEN Zhenhua. Heat-resistant magnesium alloy[M]. Beijing:Chemical Industry Press, 2006.
[3] REGEV M, AGHION E, ROSEN A. Creep studies of AZ91D pressure die casting[J]. Materials Science & Engineering A, 1997, 234(97):123-126.
[4] KOJIMA Y. Platform science and technology for advanced magnesium alloys[J]. Materials Transactions, 2001, 42(7):1154-1159.
[5] LI R G, ZHANG H J, FU G Y. Microstructure and mechanical properties of extruded Mg96Zn1Y3 alloy[J]. Materials Characterization, 2014, 98:107-112.
[6] MINE Y, YOSHIMURA H, MATSUDA M, et al. Microfracture behaviour of extruded Mg-Zn-Y alloys containing long-period stacking ordered structure at room and elevated temperatures[J]. Materials Science & Engineering A, 2013, 570(19):63-69.
[7] ARCHARD J F, HIRST W. The wear of metals under unlubricated conditions[J]. Proceedings of the Royal Society of London. Series A, 1956, 236(1206):397-410.
[8] FAROKHZADEH K, EDRISY A. Transition between mild and severe wear in titanium alloys[J]. Tribology International, 2016, 94:98-111.
[9] CHEN H, ALPAS A T. Sliding wear map for the magnesium alloy Mg-9Al-0.9Zn (AZ91)[J]. Wear, 2000, 246:106-116.
[10] AN J, XUAN X H, ZHAO J, et al. Dry sliding wear behavior and subsurface microstructure evolution of Mg97Zn1Y2 alloy in a wide sliding speed range[J]. Journal of Materials Engineering and Performance, 2016, 25(12):5363-5373.
[11] LIANG C, LI C, AN J, et al. Correlation between frictioninduced microstructural evolution, strain hardening in subsurface and tribological properties of AZ31 magnesium alloy[J]. Wear, 2014, 312:29-39.
[12] EL-MORSY A W. Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions[J]. Material Science and Engineering:A, 2008, 473:330-335.
[13] TALTAVULL C, RODRIGO P, TORRES B, et al. Dry sliding wear behavior of AM50B magnesium alloy[J], Materials and Design, 2014, 56:549-556.
[14] SELVAN S A, RAMANATHAN S. Dry sliding wear behavior of hot extruded ZE41A magnesium alloy[J]. Material Science and Engineering:A, 2010, 527(7-8):1815-1820.
[15] 安冬琪,肖宏伟,李东成,等. AZ系镁合金的轻微-严重磨损转变研究[J]. 机械工程学报, 2016, 52(6):79-85. AN Dongqi, XIAO Hongwei, LI Dongcheng, et al. Investigation on the mild to severe wear transition for AZ system magnesium alloys[J]. Journal of Mechanical Engineering, 2016, 52(6):79-85.
[16] 张翼祥,闫晓晗,王渊博. Mg-3Al-0.4Si镁合金的高温磨损行为研究[J]. 摩擦学学报, 2017, 37(6):831-837. ZHANG Yixiang, YAN Xiaohan, WANG Yuanbo. Study on high temperature wear behavior of Mg-3Al-0.4Si magnesium alloy[J]. Tribology, 2017, 37(6):831-837.

Mg97Zn1Y2镁合金的高温磨损行为

High Temperature Wear Behavior of Mg97Zn1Y2 Magnesium Alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	温玥, 陈章华. 基于各向异性损伤理论的AZ31B镁合金管材热态内压成形性能[J]. 机械工程学报, 2019, 55(18): 70-77.
[2]	王瑞麒, 李永堂. 大口径厚壁管热挤压模具磨损[J]. 机械工程学报, 2019, 55(10): 70-76.
[3]	李洋, 马立峰, 姜正义, 黄志权, 林金宝, 姬亚峰. 通过流固耦合加热的轧辊温度场分析[J]. 机械工程学报, 2018, 54(24): 51-60.
[4]	赵德望, 任大鑫, 赵坤民, 郭杏林, 杨文平. 工艺参数对镁钛异质金属超声波点焊接头拉伸性能及疲劳性能的影响[J]. 机械工程学报, 2017, 53(24): 118-125.
[5]	徐海洁, 马立峰, 刘崇林, 刘光明, 黄志权, 刘鹏涛, 林金宝. AZ31B镁合金板材多道次轧制路径研究[J]. 机械工程学报, 2017, 53(10): 43-51.
[6]	安冬琪, 肖宏伟, 李东成, 文子. AZ系镁合金的轻微-严重磨损转变研究[J]. 机械工程学报, 2016, 52(6): 79-85.
[7]	熊缨, 岑恺. 基于相对误差平方和的神经网络预测镁合金多轴疲劳寿命[J]. 机械工程学报, 2016, 52(4): 73-81.
[8]	曹睿, 朱海霞, 许庆伟, 张海燕, 林巧力, 陈剑虹. 镍铝青铜焊丝进行镁/镀锌钢板点焊的焊接性分析^*[J]. 机械工程学报, 2016, 52(24): 52-57.
[9]	周建忠, 梅於芬, 盛杰, 钟辉, 黄舒, 冯旭, 周宏达. 激光喷丸诱导镁合金表面微织构的电化学腐蚀性能[J]. 机械工程学报, 2015, 51(16): 120-126.
[10]	颜丙生;刘自然;张跃春;汤宝平. 非线性超声检测镁合金早期疲劳的试验研究[J]. , 2013, 49(4): 20-24.
[11]	李大勇;肖鹏;马旭梁;王利华. 铝镁合金熔体氢含量快速定量检测技术研究进展[J]. , 2013, 49(20): 36-41.
[12]	蒋成钢;陈章华;臧勇. 镁合金板材温热冲压过程的各向异性损伤与失效分析[J]. , 2013, 49(16): 62-69.
[13]	魏凌霄;闫志峰;王文先;张红霞;王凯. 基于红外热成像的镁合金疲劳裂纹扩展的研究[J]. , 2012, 48(6): 64-69.
[14]	李落星;周佳;张辉. 车身用铝、镁合金先进挤压成形技术及应用[J]. , 2012, 48(18): 35-43.
[15]	张士宏;宋广胜;宋鸿武;程明. 镁合金板材温热变形机理及温热成形技术[J]. , 2012, 48(18): 28-34.