纳米铜银核壳焊膏脉冲电流快速烧结连接铜基板研究

doi:10.3901/JME.2019.24.051

机械工程学报 ›› 2019, Vol. 55 ›› Issue (24): 51-56.doi: 10.3901/JME.2019.24.051

扫码分享

纳米铜银核壳焊膏脉冲电流快速烧结连接铜基板研究

黄圆^1,2, 杭春进¹, 田艳红¹, 王晨曦¹, 张贺¹

1. 哈尔滨工业大学先进焊接与连接国家重点实验室哈尔滨 150001;
2. 中国电子科技集团公司第五十五研究所南京 210016

收稿日期:2018-12-06 修回日期:2019-09-01 出版日期:2019-12-20 发布日期:2020-02-18
通讯作者: 田艳红(通信作者),女,1975年出生,博士,教授,博士研究生导师。主要研究方向为微连接与电子封装,纳米材料与器件。E-mail:tianyh@hit.edu.cn
作者简介:黄圆,女,1995年出生。主要研究方向为微连接与电子封装。E-mail:hy123hit@163.com
基金资助:
国家自然科学基金资助项目（51522503）。

Rapid Sintering of Nano Copper-Silver Core-Shell Paste and Interconnection of Copper Substrates by Pulse Current

HUANG Yuan^1,2, HANG Chunjin¹, TIAN Yanhong¹, WANG Chenxi¹, ZHANG He¹

1. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001;
2. The 55 th Research Institute of China Electronics Technology Group Corporation, Nanjing 210016

Received:2018-12-06 Revised:2019-09-01 Online:2019-12-20 Published:2020-02-18

摘要/Abstract

摘要： 一种温和的两步液相法制备的纳米铜银核壳颗粒，实现了均径为6.9 nm的小尺寸纳米银颗粒包覆在均径为57.5 nm的纳米铜颗粒的表面，采用扫描电子显微镜、透射电子显微镜和高分辨率射像对其结构进行了表征。采用模板印刷法制备铜基板/纳米铜银核壳焊膏/铜基板三明治结构，研究了脉冲电流对三明治结构的剪切强度大小和微结构特征的影响。试验结果表明脉冲电流烧结纳米铜银核壳焊膏连接Cu-Cu基板可在短时间（小于200 ms）内快速获得高致密度且实现冶金连接的高强度焊点结构。三明治结构的剪切强度随脉冲电流的增加而增大，在1.0 kA的脉冲电流下，可获得高达80 MPa的剪切强度。经研究脉冲电流烧结后的纳米铜银核壳焊膏内部显微组织结构，提出双脉冲电流下纳米铜银核壳焊膏烧结连接的机理。

关键词: 纳米铜银核壳颗粒, 纳米焊膏, 脉冲电流烧结, 快速连接, 功率器件

Abstract: Nano copper-silver core-shell particles (Cu@Ag NPs) are synthesized by a mild two-step solution method, many tiny Ag NPs with an average diameter of 6.9 nm fully covering the surfaces of medium-sized Cu NPs with the mean diameter of 57.5 nm, and scanning electron microscope (SEM), transmission electron microscope (TEM) and X-Ray diffraction (XRD) analysis are used to characterize the structure of as-synthesized Cu@Ag NPs. A simple screen-printing method is used to fabricate the sandwich structure of copper substrate/nano Cu@Ag paste/copper substrate. And the shear strength of the sandwich structure and the micro-structural features under the different pulse currents are studied. Experimental results show that a high shear strength and high intensity metallurgical joint structure can be obtained by pulse electric currents sintering nano Cu@Ag paste and connect Cu@Ag NPs and copper substrates in a less than 200 ms short time. The shear strength of the sandwich structure increases as the current increases, and the shear strength reach the highest value, i.e. 80 MPa at the pulsed current of 1.0 kA. Mechanism of pulse current sintering nano Cu@Ag paste was proposed by analyzing the nano Cu@Ag paste microstructural features after the pulse current sintering.

Key words: copper-silver core-shell nanoparticles, nanopaste, pulsed electric current sintering, rapid joining, power electronics

中图分类号:

TG407

黄圆, 杭春进, 田艳红, 王晨曦, 张贺. 纳米铜银核壳焊膏脉冲电流快速烧结连接铜基板研究[J]. 机械工程学报, 2019, 55(24): 51-56.

HUANG Yuan, HANG Chunjin, TIAN Yanhong, WANG Chenxi, ZHANG He. Rapid Sintering of Nano Copper-Silver Core-Shell Paste and Interconnection of Copper Substrates by Pulse Current[J]. Journal of Mechanical Engineering, 2019, 55(24): 51-56.

参考文献

[1] TAN K S, NOORDIN N M, CHEONG K Y. An overview of die-attach material for high temperature applications[C]//Proceeding of the 3rd International Conference of Global Network for Innovative Technology 2016:Advanced Materials for Innovative Technologies. AIP Publishing LLC, 2017:164-176.
[2] KAMYSHNY A, MAGDASSI S. Conductive nanomaterials for printed electronics[J]. Small,2014,10(17):3515-3535.
[3] ZHU Y F, LIAN J S, JIANG Q. Modeling of the melting point, debye temperature, thermal expansion coefficient, and the specific heat of nanostructured materials[J]. Journal of Physical Chemistry C, 2009, 113(39):1261-1264.
[4] KIM H K, SHI F G. Electrical reliability of electrically conductive adhesive joints:dependence on curing condition and current density[J]. Microelectronics Journal, 2001, 32(4):315-321.
[5] ZENOU M, ERMAK O, SAAR A, et al. Laser sintering of copper nanoparticles[J]. Journal of Physics D Applied Physics, 2013, 47(2):25501-25511.
[6] MORISADA Y, NAGAOKA T, FUKUSUMI M, et al. A low-temperature bonding process using mixed Cu-Ag nanoparticles[J]. Journal of Electronic Materials, 2010, 39(8):1283-1288.
[7] HAI H T, TAKAMURA H, KOIKE J. Oxidation behavior of Cu-Ag core-shell particles for solar cell applications[J]. Journal of Alloys and Compounds, 2013, 564:71-77.
[8] TIAN Y, JIANG Z, WANG C, et al. Sintering mechanism of the Cu-Ag core-shell nanoparticle paste at low temperature in ambient air[J]. Rsc Advances, 2016, 6(94):91783-91790.
[9] GRASSO S, SAKKA Y, MAIZZA G, et al. Electric current activated/assisted sintering (ECAS):a review of patents 1906-2008[J]. Science and Technology of Advanced Materials, 2009, 10(5):053001-053025.
[10] 黄圆,田艳红,江智,等. 脉冲电流快速烧结纳米铜焊膏连接铜镍基板研究[J]. 机械工程学报, 2017, 53(4):34-42. HUANG Yuan, TIAN Yanhong,JIANG Zhi,et al. Rapidly sintering of nano copper paste and interconnection of copper and nickel substrate by Pulse current[J]. Journal of Mechanical Engineering, 2017, 53(4):34-42.
[11] HUANG Yuan, HANG Chunjin, TIAN Yanhong, et al. Rapid sintering of copper nanopaste by pulse current for power electronics packaging[C]//International Conference on Electronic Packaging Technology. Harbin:IEEE, 2017:561-564.
[12] NEKOUEE K A, KHOSROSHAHI R A. Sintering behavior and mechanical properties of spark plasma sintered β-SiAlON/TiN nanocomposites[J]. International Journal of Refractory Metals & Hard Materials, 2016, 61:6-12.
[13] MUNIR Z A, QUACH D V, OHYANAGI M. Electric current activation of sintering:a review of the pulsed electric current sintering process[J]. Journal of the American Ceramic Society, 2011, 94(1):1-19.
[14] FREI J M, ANSELMI-TAMBURINI U, MUNIR Z A. Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method[J]. Journal of Applied Physics, 2007, 101(11):763.

纳米铜银核壳焊膏脉冲电流快速烧结连接铜基板研究

Rapid Sintering of Nano Copper-Silver Core-Shell Paste and Interconnection of Copper Substrates by Pulse Current

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	梁玉, 陆国权, 梅云辉. 非线性电导调制SiC/环氧树脂绝缘涂层热氧/湿热老化研究[J]. 机械工程学报, 2024, 60(6): 207-217.
[2]	张文武, 潘浩, 马秋晨, 李明雨, 计红军. 功率超声微纳电子封装互连技术研究进展[J]. 机械工程学报, 2022, 58(2): 100-121.
[3]	吴卓寰, 刘威, 温志成, 王一平, 田艳红, 王春青. 微米铜银复合结构与纳米银混合连接材料制备与高频感应快速烧结方法研究[J]. 机械工程学报, 2022, 58(2): 26-33.
[4]	马竟轩, 王尚, 杨东升, 田艳红. 纳米银焊膏热烧结及通电热老化过程动态电阻监测研究[J]. 机械工程学报, 2020, 56(8): 60-68.
[5]	黄圆, 田艳红, 江智, 王晨曦. 脉冲电流快速烧结纳米铜焊膏连接铜镍基板研究^*[J]. 机械工程学报, 2017, 53(4): 34-42.