[1] 廖向宇, 彭国成, 易全旺. 浅析超高强度钢的焊接工艺[J]. 焊接, 2006(7):56-58. LIAO Xiangyu, PENG Guocheng, YI Quanwang. Welding technology of super high-tensile steel[J]. Welding & Joining, 2006(7):56-58. [2] 许文清, 任宇飞. 工程机械结构件的焊接工艺现状与发展趋势[J]. 工程机械, 2005, 36(1):50-53. XU Wenqing, REN Yufei. Present situation of welding processes for construction machinery structure components and their development trends[J]. Construction Machinery, 2005, 36(1):50-53. [3] GOUDA M, TAKAHASHI M, IKEUCHI K. Microstructures of gas metal arc weld metal of 950 MPa class steel[J]. Science and Technology of Welding & Joining, 2005, 10(3):369-377. [4] TERASHIMA S, BHADESHIA H K D H. Changes in toughness at low oxygen concentrations in steel weld metals[J]. Science and Technology of Welding & Joining, 2006, 11(5):509-516. [5] 齐彦昌, 彭云, 魏金山, 等. 850级钢熔化焊焊缝的组织特征[J]. 钢铁研究学报, 2010, 22(3):19-22. QI Yanchang, PENG Yun, WEI Jinshan, et al. Structure characteristics of weld metal for 850MPa grade steel[J]. Journal of Iron and Steel Research, 2010, 22(3):19-22. [6] 安同邦, 单际国, 魏金山, 等. 热输入对1000MPa 级工程机械用钢接头组织性能的影响[J]. 机械工程学报, 2014, 50(22):42-49. AN Tongbang, SHAN Jiguo, WEI Jinshan, et al. Effect of geat input on microstructure and performance of welded joint in 1000MPa grade steel for construction machinery[J]. Journal of Mechanical Engineering, 2014, 50(22):42-49. [7] SURIAN E, RAMINI M, DEVEDIA L. Influence of Molybdenum on ferritic high-strength SMAW all-weld-metal properties[J]. Welding Research, 2005, 84(4):53-62. [8] 彭杏娜, 彭云, 田志凌, 等. Ni元素对Cr-Ni-Mo系高强焊缝组织演化的影响[J]. 焊接学报, 2014, 35(9):32-36. PENG Xingna, PENG Yun, TIAN Zhiling, et al. The effect of Ni on the microstructure evolution of Cr-Ni-Mo series high strength weld metal[J]. Transactions of the China Welding Institution, 2014, 35(9):32-36. [9] 张文钺. 焊接冶金学(基本原理)[M]. 北京:机械工业出版社, 1996. ZHANG Wenyue. Welding metallurgy(Basic principles)[M]. Beijing:China Machine Press, 1996. [10] 兰亮云, 邱春林, 赵德文, 等. 低碳贝氏体钢焊接热影响区中不同亚区的组织特征与韧性[J]. 金属学报, 2011, 47(8):1046-1054. LAN Liangyun, QIU Chunlin, ZHAO Dewen, et al. Microstructural characters and toughness of different sub-regions in the welding heat affected zone of low carbon bainitic steel[J]. Acta Metallurgica Sinica, 2011, 47(8):1046-1054. [11] CHANG L C, BHADESHIA H K D H. Austenite films in bainitic microstructures[J]. Materials Science and Technology, 1995, 11(9):874-881. [12] TIMOKHINA I B, HODGSON P D, PERELOMA E V. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels[J]. Metallurgical and Materials Transactions A, 2004, 35(8):2331-2341. [13] BISS V, CRYDERMAN R L. Martensite and retained austenite in hot-rolled low carbon bainitic steel[J]. Metallurgical and Materials Transactions B, 1980, 2(8):2267-2276. [14] KEEHAN E, KARLSSON L, ANDREN H O, et al. New developments with C-Mn-Ni high strength steel weld metals, Part A. microstructure[J]. Welding Journal, 2006, 85(9):200-210. [15] BHADESHIA H K D H, KEEHAN E, KARLSSON L, et al. Coalesced bainite[J]. Transactions of the Indian Institute of Metals, 2006, 59(1):689-694. [16] CABALLERO F G, CHAO J, CORNIDE J, et al. Toughness deterioration in advanced high strength bainitic steels[J]. Materials Science and Engineering A, 2009, 525(1-2):87-95. [17] KHODIRA S, SHIBAYANAGI T, TAKAHASHI M, et al. Microstructural evolution and mechanical properties of high strength 3-9% Ni-steel alloys weld metals produced by electron beam welding[J]. Materials and Design, 2014, 60(3):391-400. |