基于等效横观各向同性虚拟材料的固定结合部建模方法

doi:10.3901/JME.2017.15.141

机械工程学报 ›› 2017, Vol. 53 ›› Issue (15): 141-147.doi: 10.3901/JME.2017.15.141

基于等效横观各向同性虚拟材料的固定结合部建模方法

张学良, 范世荣, 温淑花, 王余松, 陈永会, 兰国生

太原科技大学机械工程学院太原 030024

收稿日期:2016-09-30 修回日期:2017-03-15 出版日期:2017-08-05 发布日期:2017-08-05
通讯作者: 张学良(通信作者),男,1964年出生,博士,教授,博士研究生导师。主要研究方向为机械结构动态特性和现代优化理论。E-mail:zhang_xue_l@sina.com
作者简介:范世荣,男,1990年出生,硕士研究生。主要研究方向为机械结构动态特性。E-mail:tyust_fsr@163.com
基金资助:
国家自然科学基金（51275328）和山西省自然科学基金（201601D011062）资助项目。

Modeling Method of Fixed Joint Interfaces Based on Equivalent Transversely Isotropic Virtual Material

ZHANG Xueliang, FAN Shirong, WEN Shuhua, WANG Yusong, CHEN Yonghui, LAN Guosheng

Institute of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024

Received:2016-09-30 Revised:2017-03-15 Online:2017-08-05 Published:2017-08-05

摘要/Abstract

摘要： 为提高固定结合部的建模精度以及通用性，考虑固定结合部在法向和切向的不同特性，提出利用横观各向同性虚拟材料等效的固定结合部动力学参数化建模方法，将固定结合部两接触面的微观接触部分等效为一种等截面的横观各向同性虚拟材料，等效虚拟材料与两侧零件均为固定连接。基于接触分形理论和固定结合部接触刚度分形模型，根据横观各向同性材料弹性常数的定义，理论推导了等效虚拟材料弹性常数以及密度的理论计算模型。在此基础上，对具有固定结合部的试验模型进行了有限元建模与模态分析，进而将理论分析模态与试验模态进行比较，结果表明：试验模型的理论模态与实验模态的前6阶振型完全一致，相应固有频率的相对误差的绝对值在10%以内，说明了建模方法的正确有效性，为数控机床固定结合部动力学建模提供了一种新的方法，实现了固定结合部动力学建模与有限元分析软件的无缝衔接集成。

关键词: 等效虚拟材料, 固定结合部, 横观各向同性, 建模

Abstract: To improve the fixed joint interfaces' modeling precision and versatility, considering the different characteristics of the fixed joint interfaces in normal and tangential directions, the dynamics parametric modeling method of fixed joint interfaces based on equivalent transversely isotropic virtual material is proposed. The micro contact portion of two contact surfaces in fixed joint interfaces is regarded as a virtual transversely isotropic material with a unchanged section, which is rigidly linked with two components situated at both sides of the fixed joint interfaces. Based on contact fractal theory and contact stiffness fractal model, according to the definition of transversely isotropic material's elastic constants, the theoretical calculation models of equivalent virtual material's elastic constants and density are put forward. On above basis, finite element modeling and modal analysis of one experimental model that has fixed joint interface are conducted, and then, the theoretical modals are compared with the experimental modals. The results show that the theoretical modals' first six order vibration shapes are in excellent coherence with the experimental modals', and the absolute values of the relative errors of corresponding natural frequency are less than 10%, which shows the correctness and effectiveness of the modeling method. This method provides a new method for CNC machine tools' fixed joint interfaces dynamic modeling, and the seamless integration of fixed joint interfaces dynamic modeling and finite element analysis software is achieved.

Key words: equivalent virtual material, fixed joint interfaces, modeling, transversely isotropic

中图分类号:

TH113

张学良, 范世荣, 温淑花, 王余松, 陈永会, 兰国生. 基于等效横观各向同性虚拟材料的固定结合部建模方法[J]. 机械工程学报, 2017, 53(15): 141-147.

ZHANG Xueliang, FAN Shirong, WEN Shuhua, WANG Yusong, CHEN Yonghui, LAN Guosheng. Modeling Method of Fixed Joint Interfaces Based on Equivalent Transversely Isotropic Virtual Material[J]. Journal of Mechanical Engineering, 2017, 53(15): 141-147.

参考文献

[1] 张学良. 机械结合面动态特性及应用[M]. 北京:中国科技出版社,2002. ZHANG Xueliang. Dynamic characteristics and its applications of machine joint surfaces[M]. Beijing:Press of Science and Technology of China,2002.
[2] 张杰,童忠钫. 机床固定结合面动力学建模问题[J]. 振动与冲击,1994,51(3):15-22. ZHANG Jie,TONG Zhongfang. The problem of dynamic modeling of bolted joints in machine tool[J]. Journal of Vibration and Shock,1994,51(3):15-22.
[3] INAMURA T,SATA T. Stiffness and damping identification of the elements of a machine tool structure[J]. CIRP Annuals,1979,28(1):235-239.
[4] YOSHIMURA M,OKUSHIMA K. Measurement of dynamic rigidity and damping property for simplified joint models and simulation by computer[J]. Annals of the CIRP,1977,25(1):193-198.
[5] YOSHIMURA M. Computer-aided design improvement of machine tool structure incorporating joint dynamics data[J]. Annals of the CIRP,1979,28(1):241-246.
[6] 田红亮,刘芙蓉,方子帆,等. 引入各向同性虚拟材料的固定结合部模型[J]. 振动工程学报,2013,26(4):561-573. TIAN Hongliang,LIU Furong,FANG Zifan,et al. Immovable joint surface's model using isotropic virtual material[J]. Journal of Vibration Engineering,2013,26(4):561-573.
[7] 石坤,宋俐,师俊平. 机械结合部等效材料参数建立与试验[J]. 农业机械学报,2014, 45(2):297-301. SHI Kun,SONG Li,SHI Junping. Establishment and experiment of mechanical joint equivalent material properties[J]. Transaction of the Chinese Society for Agricultural Machinery,2014,45(2):297-301.
[8] TIAN H L,LI B,LIU H Q,et al. A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools[J]. International Journal of Machine Tools and Manufacture,2011,51(3):239-249.
[9] 温诗铸,黄平. 界面科学与技术[M]. 北京:清华大学出版社,2011. WEN Shizhu,HUANG Ping. Interface science and technology[M]. Beijing:Press of Tsinghua University,2011.
[10] MAJUMDAR A,BHUSHAN B. Role of fractal geometry in roughness characterization and contact mechanics of surfaces[J]. Journal of Tribology,1990,112(2):205-216.
[11] MAJUMDAR A,BHUSHAN B. Fractal model of elastic-plastic contact between rough surfaces[J]. Journal of Tribology,1991,113(1):1-11.
[12] ZHANG X,WANG N,LAN G,et al. Tangential damping and its dissipation factor models of joint Interfaces based on fractal theory with simulations[J]. Journal of Tribology,2014,136(1):011704-1-011704-10.
[13] ZHAI C,HANAOR D,PROUST G,et al. Interfacial electro-mechanical behaviour at rough surfaces[J]. Extreme Mechanics Letters,2016,9(3):422-429.
[14] 陈建桥. 复合材料力学概论[M]. 北京:科学出版社,2006. CHEN Jianqiao. Introduction of composite materials mechanics[M]. Beijing:Press of Science,2006.
[15] 张学良,陈永会,温淑花,等. 考虑弹塑性变形机制的结合面法向接触刚度建模[J]. 振动工程学报,2015,28(1):92-99. ZHANG Xueliang,CHEN Yonghui,WEN Shuhua,et al. The model of normal contact stiffness of joint interfaces incorporating elastoplastic deformation mechanism[J]. Journal of Vibration Engineering,2015,28(1):92-99.
[16] 张学良,王南山,温淑花,等. 机械结合面切向接触阻尼能量耗散弹塑性分形模型[J]. 机械工程学报,2013,49(12):43-49. ZHANG Xueliang,WANG Nanshan,WEN Shuhua,et al. Elastoplastic fractal model for tangential contact damping energy dissipation of machine joint interfaces[J]. Journal of Mechanical Engineering,2013,49(12):43-49.
[17] 田红亮,赵春华,朱大林,等. 金属材料结合部法切向刚度修正与实验验证[J]. 农业机械学报,2012,43(6):207-214. TIAN Hongliang,ZHAO Chunhua,ZHU Dalin,et al. Modification of normal and tangential stiffness for joint interface with metallic material and experimental validation[J]. Transaction of the Chinese Society for Agricultural Machinery,2012,43(6):207-214.

基于等效横观各向同性虚拟材料的固定结合部建模方法

Modeling Method of Fixed Joint Interfaces Based on Equivalent Transversely Isotropic Virtual Material

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	蒋建东, 章恩光, 赵颖娣, 李聪聪, 乔欣. 盾构刀盘振动掘削动力学建模与仿真研究[J]. 机械工程学报, 2019, 55(5): 113-120.
[2]	李淑娟, 辛彬, 杨宇祥, 路雄, 李言, 蒋百灵, 贾祯, 李玉玺. 放电加工极间等离子体伏安特性与间距建模研究[J]. 机械工程学报, 2019, 55(5): 232-240.
[3]	董泽园, 李杰, 刘辛军, 梅斌, 陈俊宇. 数控机床两种几何误差建模方法有效性试验研究[J]. 机械工程学报, 2019, 55(5): 137-147.
[4]	李研彪, 郑航, 孙鹏, 徐涛涛, 王泽胜, 秦宋阳. 考虑关节摩擦的5-PSS/UPU并联机构动力学建模及耦合特性分析[J]. 机械工程学报, 2019, 55(3): 43-52.
[5]	张建华, 许晓林, 刘璇, 张明路. 双臂协调机器人相对动力学建模[J]. 机械工程学报, 2019, 55(3): 34-42.
[6]	董晨阳, 郑小云, 余建波. 基于过程挖掘与复杂网络集成的制造过程资源建模与关键加工节点识别[J]. 机械工程学报, 2019, 55(3): 169-180.
[7]	张亮修, 吴光强, 王宇. 车辆纵-侧-垂向动力学统一建模及实车验证[J]. 机械工程学报, 2019, 55(16): 114-122.
[8]	葛磊, 董致新, 李运华, 权龙, 张晓刚, 赵斌. 系列化液压挖掘机数字样机研究[J]. 机械工程学报, 2019, 55(14): 186-196.
[9]	彭伟星, 王耀南, 曾凯, 吴昊天. 复杂异形曲面自动建模图像矩视觉伺服定位控制[J]. 机械工程学报, 2019, 55(14): 169-177.
[10]	黄家海, 贺亚彬, 于培, 赵斌. 落地式摩擦提升机建模和振动特性分析[J]. 机械工程学报, 2019, 55(12): 205-214.
[11]	詹梅, 李志欣, 高鹏飞, 马飞, 李锐, 崔笑蕾, 张洪瑞, 陈淑婉. 铝合金大型薄壁异型曲面封头旋压成形研究进展[J]. 机械工程学报, 2018, 54(9): 86-96.
[12]	刘静, 吴昊, 邵毅敏, 师志峰. 考虑内圈挡边表面波纹度的圆锥滚子轴承振动特征研究[J]. 机械工程学报, 2018, 54(8): 26-34.
[13]	杨永前,陈曦. 基于PSASP程序的TCPST潮流建模与仿真[J]. 电气工程学报, 2018, 13(8): 37-42.
[14]	兰凤崇, 黄培鑫, 陈吉清, 刘金. 车用电池包结构动力学建模及分析方法研究[J]. 机械工程学报, 2018, 54(8): 157-164.
[15]	王昊琪, 张旭, 唐承统. 复杂工程系统下基于模型的公理化设计方法[J]. 机械工程学报, 2018, 54(7): 184-198.