周向重叠三分螺旋折流板换热器油－水传热性能试验研究

doi:10.3901/JME.2015.04.161

机械工程学报 ›› 2015, Vol. 51 ›› Issue (4): 161-166.doi: 10.3901/JME.2015.04.161

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

周向重叠三分螺旋折流板换热器油－水传热性能试验研究

王伟晗¹ 程道来¹ 陈亚平² 董聪³

1. 上海应用技术学院城市建设与安全工程学院上海 201418
2. 东南大学能源与环境学院南京 210096
3. 浙江科技学院机械与汽车工程学院杭州 310023

出版日期:2015-02-20 发布日期:2015-02-20
基金资助:
国家自然科学基金资助项目(51276035)、上海市高校优秀青年教师培养资助计划项目(405ZK11YQ15)和上海市科委财政绿色能源与动力工程资助项目(4521ZK120064004)。

Experimental Study on Oil to Water Heat Transfer Performance of Circumferential Overlap Trisection Helical Baffle Heat Exchangers

WANG Weihan¹ CHENG Daolai¹ CHEN Yaping² DONG Cong³

1. College of Urban Construction and Safety Engineering, Shanghai Institute of Technology, Shanghai 201418
2. School of Energy and Environment, Southeast University, Nanjing 210096
3. School of Mechanical and Automotive Engineering, Zhejiang University of Science and Technology, Hangzhou 310023

Online:2015-02-20 Published:2015-02-20

摘要/Abstract

摘要： 对倾斜角为12°、16°、20°、24°和28°的周向重叠三分螺旋折流板换热器和弓形折流板换热器的传热和压降性能进行试验研究。换热器采用公共壳体和可更换管芯结构，热流体与冷流体分别为70 ℃左右的导热油和11 ℃左右的冷却水。试验结果表明，在试验范围内周向重叠三分螺旋折流板换热器总体传热系数、壳侧传热系数、壳侧压降和综合性能综合指标ho/Δpo和ho/Δpo1/3都随着倾斜角增大而减小；倾斜角12°方案的性能指标最佳，其壳侧传热系数ho、综合性能指标ho/Δpo和ho/Δpo1/3与弓形折流板换热器的数值之比的平均值分别为1.253、1.391和1.285。

关键词: 螺旋折流板换热器, 倾斜角, 三分螺旋折流板, 性能试验, 周向重叠

Abstract: Experimental study on heat transfer performance of circumferential overlap trisection helical baffle heat exchangers of tilt angles 12°, 16°, 20°, 24°and 28° compared with a segmental baffle heat exchanger are conducted. The testing heat exchangers are constructed of a common cylinder case and replaceable tube bundle cores. The hot fluid is heat transfer oil with about 70 ℃ in the shell side and the cold fluid is cooling water with about 11 ℃ in the tube side. The results show that within the testing range, the overall heat transfer coefficient, the shell side heat transfer coefficient, pressure drop as well as comprehensive indexes ho/Δpo and ho/Δpo1/3 decrease with the increase of the tilt angle of the baffles, and the optimum scheme is the one with baffle tilt angle of 12°, and the ratios of the mean values of the shell side heat transfer coefficient ho, comprehensive index ho/Δpo and ho/Δpo1/3 of the helical scheme with baffle tilt angle of 12° over those of the segmental baffle scheme are 1.253, 1.391 and 1.285, respectively.

Key words: circumferential overlap, helical baffle heat exchanger, performance test, tilt angle, trisection helical baffle

中图分类号:

TK124

王伟晗, 程道来, 陈亚平, 董聪. 周向重叠三分螺旋折流板换热器油－水传热性能试验研究[J]. 机械工程学报, 2015, 51(4): 161-166.

WANG Weihan, CHENG Daolai, CHEN Yaping, DONG Cong. Experimental Study on Oil to Water Heat Transfer Performance of Circumferential Overlap Trisection Helical Baffle Heat Exchangers[J]. Journal of Mechanical Engineering, 2015, 51(4): 161-166.

[1]	叶青, 姜笑, 张垚, 汪若尘, 丁仁凯, 蔡英凤. 考虑响应时滞的磁流变半主动悬架H_∞控制与试验研究[J]. 机械工程学报, 2024, 60(18): 276-287.
[2]	郑良焱, 朱汉华, 范世东, 熊庭, 马晶宁, 吴洁, 江攀. 计入应力偶效应的滑动轴承热流体混合润滑研究[J]. 机械工程学报, 2023, 59(10): 290-300.
[3]	康娅娟, 刘少军, 姜永明. 多级深海输送电泵叶轮径向不平衡力研究[J]. 机械工程学报, 2021, 57(22): 406-415.
[4]	熊万里, 周阳, 赵紫生, 吕浪. 高速角接触球轴承套圈倾斜角允许范围的定量研究[J]. 机械工程学报, 2015, 51(23): 46-52.
[5]	董聪;陈亚平. 阻流板对轴向搭接螺旋折流板换热器流动和传热性能的影响[J]. , 2014, 50(6): 135-140.
[6]	沙毅;宋德玉;段福斌;喻彩丽;曹淼龙. 轴流泵变转速性能试验及内部流场数值计算[J]. , 2012, 48(6): 187-192.
[7]	孔繁甫;何安瑞;邵健. 快速辊系变形在线计算方法研究[J]. , 2012, 48(2): 121-126.
[8]	杨帆;刘超;汤方平;周济人. 斜轴伸泵装置水动力数值计算与模型试验[J]. , 2012, 48(18): 152-159.
[9]	李水良;杨新红;徐锐良;谢金法;刘国泉;刘汉华. 全路面多用途自走式电源车研制[J]. , 2010, 46(8): 103-108.
[10]	石万凯;姜宏伟;秦大同;武斌;徐戊矫. 新型涂层钢蜗杆副传动机理研究与传动性能评价[J]. , 2010, 46(5): 22-29.
[11]	李春曦;王松岭. 离心通风机蜗壳内的流动特征及节能改造试验研究[J]. , 2009, 45(7): 278-283.
[12]	王晓;张宝怀. 基于LabVIEW的换热器性能试验装置测控系统的开发[J]. , 2009, 45(4): 309-312.

周向重叠三分螺旋折流板换热器油－水传热性能试验研究

Experimental Study on Oil to Water Heat Transfer Performance of Circumferential Overlap Trisection Helical Baffle Heat Exchangers

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价