Journal of Mechanical Engineering

2018, Volume 54 Issue 19 Publication:05 October 2018
Previous Issue Next Issue
Design and Analysis of Flexible Wearable Wrist Power Glove

YAO Jiantao, LI Haili, CAO Kaibin, CHEN Xinbo, ZHOU Pan, ZHAO Yongsheng
Journal of Mechanical Engineering. 2018, 54 (19): 1-9. doi: 10.3901/JME.2018.19.001
Abstract ( 1952 )    PDF(492KB) ( 1006 )
References | Related Articles | Metrics
Motion Planning for Robotic Smooth Catching of Moving Object
ZHANG Chi, SHANG Weiwei, CONG Shuang, LIU Yi
机械工程学报. 2018, 54 (19): 10-17. doi: 10.3901/JME.2018.19.010
Abstract ( 1330 )    PDF(443KB) ( 676 )
References | Related Articles | Metrics
Type Synthesis of Metamorphic Parallel Mechanism with Spherical Five Bar Linkage
WANG Bing, FANG Yuefa
机械工程学报. 2018, 54 (19): 18-26. doi: 10.3901/JME.2018.19.018
Abstract ( 795 )    PDF(454KB) ( 557 )
References | Related Articles | Metrics
Geometric Modeling and Free-elimination Computing Method for the Forward Kinematics Analysis of Planar Parallel Manipulators
ZHANG Ying, WEI Shimin, LI Duanling, LIAO Qizheng
机械工程学报. 2018, 54 (19): 27-33. doi: 10.3901/JME.2018.19.027
Abstract ( 842 )    PDF(236KB) ( 491 )
References | Related Articles | Metrics
Design of Shaving Cutter with Unequilateral Profile
CAI Anjiang, ZHANG Hua, LI Ling, LIU Lei, LI Lixia
机械工程学报. 2018, 54 (19): 34-40. doi: 10.3901/JME.2018.19.034
Abstract ( 659 )    PDF(452KB) ( 204 )
References | Related Articles | Metrics
Synthesis of a Type of Self-motion Mechanisms and the Dimensional Characteristic of Ratio Based on the Construction of Cognates
SHEN Chengwei, HANG Lubin
机械工程学报. 2018, 54 (19): 41-48. doi: 10.3901/JME.2018.19.041
Abstract ( 732 )    PDF(283KB) ( 333 )
References | Related Articles | Metrics
Machine Setting Calculation and Contact Characteristics Control Method of Face Hobbing Hypoid Gear
ZHANG Weiqing, GUO Xiaodong, ZHANG Mingde
机械工程学报. 2018, 54 (19): 49-57. doi: 10.3901/JME.2018.19.049
Abstract ( 628 )    PDF(441KB) ( 278 )
References | Related Articles | Metrics
Advances in Condition Monitoring, Diagnosis and Vibration Control of Smart Spindles
CHEN Xuefeng, ZHANG Xingwu, CAO Hongrui
机械工程学报. 2018, 54 (19): 58-69. doi: 10.3901/JME.2018.19.058
Abstract ( 1025 )    PDF(800KB) ( 712 )
References | Related Articles | Metrics
Dynamic Simulation of Electrical Wire Based on the Piecewise Absolute Nodal Coordinate Formulation Cable Element
YU Zuqing, LAN Peng, LI Kunkun, LU Nianli
机械工程学报. 2018, 54 (19): 70-77. doi: 10.3901/JME.2018.19.070
Abstract ( 573 )    PDF(282KB) ( 404 )
References | Related Articles | Metrics
Hardware-in-the-loop Simulation Technology of Cylindrical Roller Bearing
ZHANG Wenhu, DENG Sier, CHEN Guoding, HU Yongle
机械工程学报. 2018, 54 (19): 78-87. doi: 10.3901/JME.2018.19.078
Abstract ( 695 )    PDF(565KB) ( 448 )
References | Related Articles | Metrics
Investigation of Contact Stiffness Model for Joint Surfaces Based on Domain Expansion Factor and Asperity Interaction
WANG Runqiong, ZHU Lida, ZHU Chunxia
机械工程学报. 2018, 54 (19): 88-95. doi: 10.3901/JME.2018.19.088
Abstract ( 911 )    PDF(301KB) ( 522 )
References | Related Articles | Metrics
Research on the Dynamic Characteristics of NUSL Flexible Hinge Slider
MA Xizhi, HUO Bobo, LI Miaomiao
机械工程学报. 2018, 54 (19): 96-101. doi: 10.3901/JME.2018.19.096
Abstract ( 543 )    PDF(333KB) ( 245 )
References | Related Articles | Metrics
Performance Analysis of Carbon-carbon Composite Rotating Finger Seal
HAN Haitao, CHEN Guoding, SU Hua, ZHAO Hailin
机械工程学报. 2018, 54 (19): 102-110. doi: 10.3901/JME.2018.19.102
Abstract ( 759 )    PDF(493KB) ( 439 )
References | Related Articles | Metrics
Local Bézier Transition Method along Continuous Short-line Toolpath
ZHANG Yong, YE Peiqing, XIAO Jianxin, ZHANG Hui
机械工程学报. 2018, 54 (19): 111-120. doi: 10.3901/JME.2018.19.111
Abstract ( 577 )    PDF(503KB) ( 262 )
References | Related Articles | Metrics
Variable Density Cellular Structure Design Method Base on Local Relative Density Mapping
ZHAO Fanglei, JING Shikai, LIU Chenyan
机械工程学报. 2018, 54 (19): 121-128. doi: 10.3901/JME.2018.19.121
Abstract ( 692 )    PDF(460KB) ( 397 )
References | Related Articles | Metrics
Design and Experimental Research of the Oil-free Turbocharger
LIU Wanhui, LÜ Peng, YU Rui, FENG Kai
机械工程学报. 2018, 54 (19): 129-136. doi: 10.3901/JME.2018.19.129
Abstract ( 591 )    PDF(585KB) ( 460 )
References | Related Articles | Metrics
Thermal Dynamic Hysteresis Modeling and Compensation for Linear Motor Driven Feed Mechanism
LIN Xiankun, ZHANG Wei, FAN Zhenhua
机械工程学报. 2018, 54 (19): 137-143. doi: 10.3901/JME.2018.19.137
Abstract ( 753 )    PDF(400KB) ( 349 )
References | Related Articles | Metrics
Equivalent Characteristic Parameters of Mechanical Joints
SHI Kun, ZHANG Guangpeng, WEI Fengtao, YUAN Yuan
机械工程学报. 2018, 54 (19): 144-149. doi: 10.3901/JME.2018.19.144
Abstract ( 682 )    PDF(264KB) ( 351 )
References | Related Articles | Metrics
Interpolation for NURBS Curve with Corner on Curve Splitting According to its Critical Curvature
JI Guoshun, YU Wujia, CHEN Zhiping
机械工程学报. 2018, 54 (19): 150-157. doi: 10.3901/JME.2018.19.150
Abstract ( 602 )    PDF(306KB) ( 244 )
References | Related Articles | Metrics
Multi-granularity Dynamic Model Establishment and Simulation of Carbon Emissions for Machining Process Based on DEVS
ZHU Shuo, ZHANG Hua, JIANG Zhigang, CAO Huajun
机械工程学报. 2018, 54 (19): 158-169. doi: 10.3901/JME.2018.19.158
Abstract ( 679 )    PDF(601KB) ( 268 )
References | Related Articles | Metrics
Modeling of Flexible Composite Mold for Nanoimprint Lithography
LI Yanqiang, LAN Hongbo, XU Quan, LIANG Sen, LIU Hongzhong
机械工程学报. 2018, 54 (19): 170-181. doi: 10.3901/JME.2018.19.170
Abstract ( 725 )    PDF(800KB) ( 281 )
References | Related Articles | Metrics
Analysis of the Stagnant Characteristics of the Material in the Mechanical Ruling Process
DING Yanchun, SHI Guangfeng, SHI Guoquan
机械工程学报. 2018, 54 (19): 182-189. doi: 10.3901/JME.2018.19.182
Abstract ( 684 )    PDF(381KB) ( 255 )
References | Related Articles | Metrics
Fretting Fatigue Mechanism Research of the Aluminum Alloy Clinched Joints
ZHANG Yue, HE Xiaocong, LI Zhi, ZHANG Yihe
机械工程学报. 2018, 54 (19): 190-196. doi: 10.3901/JME.2018.19.190
Abstract ( 683 )    PDF(363KB) ( 253 )
References | Related Articles | Metrics
Multi-objective Layout Optimization for Branch Pipe of Aero-engine Based on MOPSO
LIU Qiang, MAO Li
机械工程学报. 2018, 54 (19): 197-203. doi: 10.3901/JME.2018.19.197
Abstract ( 892 )    PDF(304KB) ( 319 )
References | Related Articles | Metrics
A 5-axis Coordinated Grinding Method of Non-coaxial Helical Flank Micro-drill and Its Drilling Performance Research
ZHANG Suyan, LIANG Zhiqiang, WANG Xibin, ZHOU Tianfeng, JIAO Li, LIU Zhibing, YAN Pei
机械工程学报. 2018, 54 (19): 204-211. doi: 10.3901/JME.2018.19.204
Abstract ( 660 )    PDF(479KB) ( 294 )
References | Related Articles | Metrics
Research on Modeling and Simulation of Surface Topography Obtained by Trochoidal Milling Mode with Ball End Milling Cutter
DONG Yongheng, LI Shujuan, LI Yan, LI Pengyang, YANG Zhenchao, XIN Bin
机械工程学报. 2018, 54 (19): 212-223. doi: 10.3901/JME.2018.19.212
Abstract ( 634 )    PDF(641KB) ( 282 )
References | Related Articles | Metrics
Effect of Different Oxidizers on Chemical Mechanical Polishing of 6H-SiC
NI Zifeng, CHEN Guomei, XU Laijun, BAI Yawen, LI Qingzhong, ZHAO Yongwu
机械工程学报. 2018, 54 (19): 224-231. doi: 10.3901/JME.2018.19.224
Abstract ( 750 )    PDF(384KB) ( 514 )
References | Related Articles | Metrics
Investigation on the Grinding Ability of Thread Gauge Material under Different Heat Treatment
GUO Guoqiang, CHENG Qunlin, YANG Changqi, YUAN Lin, LIN Lifang, CHEN Ming
机械工程学报. 2018, 54 (19): 232-240. doi: 10.3901/JME.2018.19.232
Abstract ( 667 )    PDF(569KB) ( 244 )
References | Related Articles | Metrics
Prediction of Blade Distortion Induced by Milling Residual Stresses Based on Clamping Force Monitoring
WANG Junteng, ZHANG Dinghua, WU Baohai, LUO Ming
机械工程学报. 2018, 54 (19): 241-248. doi: 10.3901/JME.2018.19.241
Abstract ( 680 )    PDF(335KB) ( 304 )
References | Related Articles | Metrics