Journal of Mechanical Engineering

2018, Volume 54 Issue 11 Publication:05 June 2018
Previous Issue Next Issue
The State-of-the-art, Connotation and Developing Trends of the Products Assembly Technology

LIU Jianhua, SUN Qingchao, CHENG Hui, LIU Xiaokang, DING Xiaoyu, LIU Shaoli, XIONG Hui
Journal of Mechanical Engineering. 2018, 54 (11): 2-28. doi: 10.3901/JME.2018.11.002
Abstract ( 1426 )    PDF(540KB) ( 1150 )
References | Related Articles | Metrics
Uncertainty Analysis of Assembly Error of Planar Single-loop Mechanisms Based on the Rotatability Laws of Linkages
ZHAO Qiangqiang, GUO Junkang, HONG Jun
机械工程学报. 2018, 54 (11): 29-38. doi: 10.3901/JME.2018.11.029
Abstract ( 558 )    PDF(397KB) ( 470 )
References | Related Articles | Metrics
Three-dimensional Tolerance Modeling and Precision Analysis of Flexible Body Based on the Assembly Load
MU Xiaokai, SUN Qingchao, SUN Kepeng, SUN Wei
机械工程学报. 2018, 54 (11): 39-48. doi: 10.3901/JME.2018.11.039
Abstract ( 610 )    PDF(511KB) ( 381 )
References | Related Articles | Metrics
Assembly Error Analysis and In-orbit Verification of Grazing Incidence Focusing X-ray Pulsar Telescope
LI Liansheng, MEI Zhiwu, DENG Loulou, LÜ Zhengxin, LIU Jihong, SUN Jianbo, SUN Yan, ZHOU Hao, ZUO Fuchang
机械工程学报. 2018, 54 (11): 49-60. doi: 10.3901/JME.2018.11.049
Abstract ( 550 )    PDF(631KB) ( 610 )
References | Related Articles | Metrics
The Modeling, Evolutionary and Application of Quasi-physical Virtual Assembly
BAO Jinsong, LI Zhiqiang, XIANG Qian, WU Dianliang, ZHENG Xiaohu
机械工程学报. 2018, 54 (11): 61-69. doi: 10.3901/JME.2018.11.061
Abstract ( 598 )    PDF(466KB) ( 416 )
References | Related Articles | Metrics
Assembly Method Based on Constrained Surface Registration
ZHANG Qiushuang, JIN Xin, ZHANG Zhongqing, ZHANG Zhijing, SHANG Ke
机械工程学报. 2018, 54 (11): 70-76. doi: 10.3901/JME.2018.11.070
Abstract ( 672 )    PDF(421KB) ( 545 )
References | Related Articles | Metrics
Friction Torque Measurement System and Precision Assembly Process for Arc-shaped Structure Seeker Servo Mechanism
WU Wei, SHANG Jianzhong, LUO Zirong, CAO Yujun, YU Naihui
机械工程学报. 2018, 54 (11): 77-84. doi: 10.3901/JME.2018.11.077
Abstract ( 603 )    PDF(405KB) ( 399 )
References | Related Articles | Metrics
Robotic Assembly Technology for Heavy Component of Spacecraft Based on Compliance Control
HU Ruiqin, ZHANG Lijian, MENG Shaohua, DONG Que, LONG Changyu
机械工程学报. 2018, 54 (11): 85-93. doi: 10.3901/JME.2018.11.085
Abstract ( 920 )    PDF(424KB) ( 643 )
References | Related Articles | Metrics
The Research of One Two-degree-of-freedom Spatial Gripper with Opening
CAO Yi, LIU Kai, GUI Heli, ZHOU Hui, ZHANG Hong
机械工程学报. 2018, 54 (11): 94-101. doi: 10.3901/JME.2018.11.094
Abstract ( 590 )    PDF(375KB) ( 493 )
References | Related Articles | Metrics
Interface Parameter Identification of Bolted Connections Based on Gradient Virtual Material
SUN Qingchao, HUANG Qingtao, SUN Zhiyong, QI Yanhua, SUN Wei
机械工程学报. 2018, 54 (11): 102-109. doi: 10.3901/JME.2018.11.102
Abstract ( 751 )    PDF(416KB) ( 479 )
References | Related Articles | Metrics
Study of Thrust Force Distribution in a Drilling Cycle during Drilling of CFRP Laminates
MENG Qingxun, JIANG Shoushan, LIU Shunuan, ZHANG Kaifu, YAN Xiaoye
机械工程学报. 2018, 54 (11): 110-120. doi: 10.3901/JME.2018.11.110
Abstract ( 658 )    PDF(801KB) ( 339 )
References | Related Articles | Metrics
Assembly Quality Evaluation of Sealing Planar Based on High Precision Point Cloud
ZHANG Xiaobing, LIU Haijiang
机械工程学报. 2018, 54 (11): 121-128. doi: 10.3901/JME.2018.11.121
Abstract ( 641 )    PDF(560KB) ( 353 )
References | Related Articles | Metrics
Impact of Meshing Phase on Load Sharing for Herringbone Planetary Trai
ZHANG Linlin, ZHU Rupeng
机械工程学报. 2018, 54 (11): 129-140. doi: 10.3901/JME.2018.11.129
Abstract ( 763 )    PDF(574KB) ( 354 )
References | Related Articles | Metrics
Dynamic Parameter Identification, Control and Experiment of an Electromechanical Coupling Multi-energy Domain System For a Parallel Robot
LI Yongquan, WANG Lijie, LIU Tianxu, ZHANG Yang, ZHANG Lijie
机械工程学报. 2018, 54 (11): 141-150. doi: 10.3901/JME.2018.11.141
Abstract ( 797 )    PDF(483KB) ( 458 )
References | Related Articles | Metrics
Kinematics Analysis of a Novel 3T1R Parallel Manipulator with Full Rotational Capability
HE Leiying, TU Yekai, YE Wei, LI Qinchuan
机械工程学报. 2018, 54 (11): 151-160. doi: 10.3901/JME.2018.11.151
Abstract ( 655 )    PDF(431KB) ( 390 )
References | Related Articles | Metrics
Dynamic Performance Optimization of Coupled System for Four-stage Planetary Gear Reducer
LIN Tengjiao, CAO Hong, TAN Ziran, HE Zeyin, LÜ Hesheng
机械工程学报. 2018, 54 (11): 161-171. doi: 10.3901/JME.2018.11.161
Abstract ( 928 )    PDF(529KB) ( 418 )
References | Related Articles | Metrics
Elliptical-circular Planetary Gear Train Box-taking Mechanism Design and Trajectory Analysis for Automatic Cartoning Machines
TONG Junhua, TANG Ququ, WU Chuanyu, LOU Haifeng, CHENG Peilin, LI Xiang
机械工程学报. 2018, 54 (11): 172-179. doi: 10.3901/JME.2018.11.172
Abstract ( 620 )    PDF(513KB) ( 619 )
References | Related Articles | Metrics
Analytic-CFD Combined Method for Analysis of Mechanical Properties of Externally Pressurized Gas Journal Bearing
LI Yifei, YIN Yihui, YANG Hong, CHEN Dalin, LIU Xinen
机械工程学报. 2018, 54 (11): 180-186. doi: 10.3901/JME.2018.11.180
Abstract ( 583 )    PDF(391KB) ( 241 )
References | Related Articles | Metrics
Analysis of Nonlinear Motion of A Rotor System Supported by Fixed-tilting Pad Self-acting Aerodynamic Bearings
ZHANG Yongfang, XIAO Liangjun, LI Xianwei, ZHAO Jingqun, LI Sha
机械工程学报. 2018, 54 (11): 187-196. doi: 10.3901/JME.2018.11.187
Abstract ( 571 )    PDF(617KB) ( 330 )
References | Related Articles | Metrics
Study on GPU Parallel Speedup and Application of FE-EFG Coupling Method
GONG Shuguang, LIAO Yuli, XIE Guilan, ZHANG Jianping
机械工程学报. 2018, 54 (11): 197-204. doi: 10.3901/JME.2018.11.197
Abstract ( 551 )    PDF(327KB) ( 179 )
References | Related Articles | Metrics
Comparative Experimental Study on Cutting Mechanism between Gear Honing and Grinding Process
HAN Jiang, YUAN Bin, WANG Dongling, LIANG Hui, XIA Lian
机械工程学报. 2018, 54 (11): 205-213. doi: 10.3901/JME.2018.11.205
Abstract ( 568 )    PDF(511KB) ( 320 )
References | Related Articles | Metrics
Design, Manufacture And Grinding Accuracy Detection of PCBN Tools with Variable Chamfer Edge
CHEN Tao, WANG Daoyuan, LI Suyan, LIU Xianli
机械工程学报. 2018, 54 (11): 214-221. doi: 10.3901/JME.2018.11.214
Abstract ( 716 )    PDF(535KB) ( 268 )
References | Related Articles | Metrics
Study of Shaping Processing Method for Deep Hole Keyway Based on Symmetry Degree On-line Detection and Compensation
ZHAO Chunhua, LIANG Zhipeng, QIN Hongling
机械工程学报. 2018, 54 (11): 222-232. doi: 10.3901/JME.2018.11.222
Abstract ( 649 )    PDF(410KB) ( 249 )
References | Related Articles | Metrics