Journal of Mechanical Engineering

2016, Volume 52 Issue 1 Publication:05 January 2016
Previous Issue Next Issue
Review on Research of Uncertain Dynamics for Gear System
WEI Sha, HAN Qinkai, CHU Fulei
机械工程学报. 2016, 52 (1): 1-19. doi: 10.3901/JME.2016.01.001
Abstract ( 1121 )    PDF(430KB) ( 817 )
References | Related Articles | Metrics
Surface Synthesis Method on Generating Parameters Computation of Spiral Bevel-gears
WEI Bingyang, DENG Xiaozhong, TONG Angxin, YANG Jianjun
机械工程学报. 2016, 52 (1): 20-25. doi: 10.3901/JME.2016.01.020
Abstract ( 777 )    PDF(547KB) ( 340 )
References | Related Articles | Metrics
Design and Research of Rack-based Variable Stiffness Actuator
WANG Wei, LIU Lidong, WEI Lai, LIU Fei, YUN Chao
机械工程学报. 2016, 52 (1): 26-33. doi: 10.3901/JME.2016.01.026
Abstract ( 725 )    PDF(1625KB) ( 419 )
References | Related Articles | Metrics
Performance Analysis of 6-RRS Over-redundant Actuation Flight Simulator
ZHOU Changchun, FANG Yuefa, YE Wei, WANG Congzhe
机械工程学报. 2016, 52 (1): 34-40. doi: 10.3901/JME.2016.01.034
Abstract ( 726 )    PDF(6702KB) ( 302 )
References | Related Articles | Metrics
Two Kinds of Novel Methods for Analyzing the Degree of   Freedom of Flexure Mechanisms
LI Shouzhong
机械工程学报. 2016, 52 (1): 41-46. doi: 10.3901/JME.2016.01.041
Abstract ( 774 )    PDF(421KB) ( 451 )
References | Related Articles | Metrics
Kinematic Analysis of a New Type of Coaxial Helicopter Control Mechanism
GUO Xijuan, MENG Xiaogang, WANG Yuzhen, CHANG Fuqing, HUANG Tianyu
机械工程学报. 2016, 52 (1): 47-56. doi: 10.3901/JME.2016.01.047
Abstract ( 801 )    PDF(898KB) ( 447 )
References | Related Articles | Metrics
Electrical Performance Analysis of Metal Space Frame Radome with Structural Deformation
XU Wanye, LI Peng, QIU Yuanying, LIN Zhanchao
机械工程学报. 2016, 52 (1): 57-63. doi: 10.3901/JME.2016.01.057
Abstract ( 598 )    PDF(743KB) ( 327 )
References | Related Articles | Metrics
Computation Method of Non-circular Gear Based on Seedling Needle Tip Point’s Static Trajectory in Transplanting Mechanism
LI Ge, YING Kongyue, ZHANG Jizhao, LI Jianfang, YU Gaohong, YE Yongsong, WANG Chan, LI Shiming
机械工程学报. 2016, 52 (1): 64-71. doi: 10.3901/JME.2016.01.064
Abstract ( 566 )    PDF(996KB) ( 245 )
References | Related Articles | Metrics
Optimization Design of Shape-shifting Robot Based on Many-objective Directional Hybrid Evolutionary Algorithm
ZHANG Yongjian, BI Xiaojun
机械工程学报. 2016, 52 (1): 72-78.
Abstract ( 568 )    PDF(495KB) ( 448 )
References | Related Articles | Metrics
Improvement of the Algorithm of the Inverse Kinematics Calculation for 6R Series Robots Based on One Novel Paden-Kahan Sub-problem
SUN Henghui, ZHAO Aiwu, LI Da, ZHANG Maofeng
机械工程学报. 2016, 52 (1): 79-86. doi: 10.3901/JME.2016.01.079
Abstract ( 681 )    PDF(1529KB) ( 357 )
References | Related Articles | Metrics
A Relevance Vector Machine Prediction Method Based on Adaptive Multi-kernel Combination and Its Application to Remaining Useful Life Prediction of Machinery
LEI Yaguo, CHEN Wu, LI Naipeng, LIN Jing
机械工程学报. 2016, 52 (1): 87-93. doi: 10.3901/JME.2016.01.087
Abstract ( 1037 )    PDF(900KB) ( 816 )
References | Related Articles | Metrics
Weak Fault Enhancement Method for Blade Crack by Using Stochastic Resonance
LI Hongkun, ZHANG Xiaowen, HE Changbo, XU Fujian, ZHANG Xuefeng
机械工程学报. 2016, 52 (1): 94-101. doi: 10.3901/JME.2016.01.094
Abstract ( 709 )    PDF(1718KB) ( 304 )
References | Related Articles | Metrics
Matching Pursuit Method for Coupling Modulation Signal Separation of Gearbox Vibration
HE Guolin, DING Kang, LIN Huibin
机械工程学报. 2016, 52 (1): 102-108. doi: 10.3901/JME.2016.01.102
Abstract ( 598 )    PDF(660KB) ( 381 )
References | Related Articles | Metrics
Carrying Capacity Analysis of Slewing Bearing Used in Kiloton Class Whole Ground Crane
LI Yunfeng, JIANG Di
机械工程学报. 2016, 52 (1): 109-115. doi: 10.3901/JME.2016.01.109
Abstract ( 722 )    PDF(1392KB) ( 431 )
References | Related Articles | Metrics
Improving the Far-field Errors for Load Identification Based on Virtual Far-field Exciting Method
MA Fuyin, WU Jiuhui, WU Weiwei
机械工程学报. 2016, 52 (1): 116-122. doi: 10.3901/JME.2016.01.116
Abstract ( 594 )    PDF(3818KB) ( 359 )
References | Related Articles | Metrics
A New Approach of Constraints Establishment and Optimization for Matrix Tolerance Model
CHEN Hua, LIN Guansheng, TANG Tao, YANG Jia, JIN Sun
机械工程学报. 2016, 52 (1): 123-129. doi: 10.3901/JME.2016.01.123
Abstract ( 532 )    PDF(1338KB) ( 285 )
References | Related Articles | Metrics
Online Control Threshold Optimization for Complex Mechanical Products Assembly Process Based on Hybrid Genetic Particle Swarm Optimization
WANG Xiaoqiao, LIU Mingzhou, GE Maogen, MA Jing, LIU Conghu
机械工程学报. 2016, 52 (1): 130-138. doi: 10.3901/JME.2016.01.130
Abstract ( 654 )    PDF(403KB) ( 372 )
References | Related Articles | Metrics
Method for Automatic Generation of Assembly Interference Matrix of Complex Products
ZHANG Wenlei, QU Rongxia, XU Meirong, LUO Xiaochuan
机械工程学报. 2016, 52 (1): 139-148. doi: 10.3901/JME.2016.01.139
Abstract ( 738 )    PDF(2237KB) ( 362 )
References | Related Articles | Metrics
Integrated Scheduling Algorithm of Two Workshops Based on the Principle of the Neighborhood Rendering
XIE Zhiqiang, YU Jie, CHEN Deyun, YANG Jing
机械工程学报. 2016, 52 (1): 149-159. doi: 10.3901/JME.2016.01.149
Abstract ( 609 )    PDF(582KB) ( 338 )
References | Related Articles | Metrics
Development a Novel Fatigue Testing Apparatus for Artificial Hip Joint Femur Stem
HUA Zikai, ZHANG Huanhuan, WEI Qingyue, FAN Yongwei, PAN Shaobin
机械工程学报. 2016, 52 (1): 160-164. doi: 10.3901/JME.2016.01.160
Abstract ( 774 )    PDF(1501KB) ( 404 )
References | Related Articles | Metrics
Statistical Reconstruction Algorithm for Restoring Broken Tooth Surface Based on Occlusion Spatial Constraint
ZHANG Changdong, LIU Tingting, LIAO Wenhe, ZHANG Kai
机械工程学报. 2016, 52 (1): 165-174. doi: 10.3901/JME.2016.01.165
Abstract ( 634 )    PDF(2501KB) ( 254 )
References | Related Articles | Metrics
Improved Bayesian Network Model for Supplier Selection of Complicated Product Development
ZHONG Jinhong, BAI Yang
机械工程学报. 2016, 52 (1): 175-183. doi: 10.3901/JME.2016.01.175
Abstract ( 575 )    PDF(482KB) ( 346 )
References | Related Articles | Metrics
Positioning Error of Feed Axis Decouple-separating Modeling and Compensating Research for CNC Machine Tools
YAO Xiaopeng, YIN Guofu, LI Guangming
机械工程学报. 2016, 52 (1): 184-192. doi: 10.3901/JME.2016.01.184
Abstract ( 691 )    PDF(795KB) ( 371 )
References | Related Articles | Metrics
Design Algorithm of Workpiece Locating Scheme Based on Analytical Hierarchy Process and Locating Determination
QIN Guohua, WU Zhibin, YE Haichao, WANG Zikun
机械工程学报. 2016, 52 (1): 193-203. doi: 10.3901/JME.2016.01.193
Abstract ( 897 )    PDF(1840KB) ( 356 )
References | Related Articles | Metrics
Assembly Body Structure Project Generation Method by Key Structures
DONG Yan, XU Jing
机械工程学报. 2016, 52 (1): 204-212. doi: 10.3901/JME.2016.01.204
Abstract ( 596 )    PDF(458KB) ( 353 )
References | Related Articles | Metrics