RESEARCH ON THE CONNECTING METHOD FOR BOUNDARY COMPENSATING CURVES IN RAPID PROTOTYPING DIRECT SLICING

›› 2003, Vol. 39 ›› Issue (5): 92-96.

• Article • Previous Articles Next Articles

RESEARCH ON THE CONNECTING METHOD FOR BOUNDARY COMPENSATING CURVES IN RAPID PROTOTYPING DIRECT SLICING

Zhang Jiayi; Liu Weijun; Wang Tianran

Shengyang Institute of Automation, Chinese Academy of Sciences

Published:2003-05-15

Abstract

CLC Number:

TH13

Zhang Jiayi;Liu Weijun;Wang Tianran. RESEARCH ON THE CONNECTING METHOD FOR BOUNDARY COMPENSATING CURVES IN RAPID PROTOTYPING DIRECT SLICING[J]. , 2003, 39(5): 92-96.

[1]	ZHOU Zihong, YOU Weitao, LU Yinyu, XI Yufan, WANG Kexing, WANG Guanyun, SUN Lingyun. Shape-changing Interface Design with the User-defined Form and Self-sensing Capability [J]. Journal of Mechanical Engineering, 2023, 59(11): 84-93.
[2]	BAI Xingwang, ZHANG Haiou, ZHOU Xiangman, WANG Guilan. Electromagneto-fluid Coupling Simulation of Arc Rapid Prototyping Process with External High-frequency Magnetic Field [J]. Journal of Mechanical Engineering, 2016, 52(4): 60-66.
[3]	LI Dichen;HE Jiankang;TIAN Xiaoyong;LIU Yaxiong;ZHANG Anfeng;LIAN Qin;JIN Zhongmin;LU Bingheng. Additive Manufacturing：Integrated Fabrication of Macro/Microstructures [J]. , 2013, 49(6): 129-135.
[4]	ZHANG Zhengyan;WANG Xiaoping;HU Jiquan;CHEN Dingfang;TAO Menglun. Representation algorithms of multi-materials part for Rapid Prototyping [J]. , 2013, 49(3): 163-173.
[5]	HUANG Zhi;WU Yiwan;LIU Jian;HU Shengyuan. Research on Lane Departure Avoidance System of High-speed Vehicle [J]. , 2013, 49(22): 157-163.
[6]	ZHAO Zhiguo;HU Xiaotian;JIANG Jiaolong;WANG Qi;ZHANG Tong. Slip Mode Variable Structure Coordinating Control and Real-time Optimization of Launch for Dry Dual Clutch Transmission [J]. , 2012, 48(24): 87-105.
[7]	ZHU Yufang;YANG Jiquan;WANG Changming. Micro-tetrahedral-based Representation for Heterogeneous Objects Modeling [J]. , 2012, 48(1): 150-155.
[8]	WU Rendong;YANG Hui;ZHANG Lei;HU Chuan. Research Situation of Rapid Prototyping Techniques Used for Tissue Engineering Scaffold [J]. , 2011, 47(5): 170-176.
[9]	XIAO Yuan;QI Lehua;ZENG Xianghui;CHAO Yanpu;YANG Fang. Uniform Metal Droplet Produced by Pneumatic Generator with Controlled Spray Process and Analysis of the Droplet Deposition Accuracy [J]. , 2011, 47(15): 156-160.
[10]	CUI Tongkui;YAN Yongnian;ZHANG Renji;XU Mingen;WANG Xiaohong. Progress in Development of Vascularized Adpipose Tissues [J]. , 2010, 46(5): 99-104.
[11]	LIU Yunfeng;XU Junhua;DONG Xingtao;JIANG Xianfeng;PENG Wei. Modern Design and Manufacturing Technology for Accurate Dental Implanting [J]. , 2010, 46(5): 150-157.
[12]	YAN Yongnian;LI Shengjie;XIONG Zhuo;WANG Xiaohong;ZHANG Ting;ZHANG Renji. Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping [J]. , 2010, 46(5): 93-98.
[13]	LI Shengjie;YAN Yongnian;QIN Haiyan;ZHAO Yimin;CHEN Xingrui. Rapid Prototyping of Polyurethane Auricle Cartilage Scaffold [J]. , 2010, 46(5): 139-144.
[14]	ZHANG Renji;LIU Li;XIONG Zhuo;YAN Yongnian;WANG Xiaohong;JIN Le. Novel Rapid Prototyping Method to Fabricate Poly(lactide-co-glycolide) Scaffold with High Porosity [J]. , 2010, 46(5): 105-109.
[15]	LI Xinya;WANG Decheng;LIU Feng;ZHANG Libin. Visioning─future of Advanced Manufacture Technology & Equipment——Present Situation & Tendency of Advanced Forming Technique & Equipment [J]. , 2010, 46(17): 100-104.

RESEARCH ON THE CONNECTING METHOD FOR BOUNDARY COMPENSATING CURVES IN RAPID PROTOTYPING DIRECT SLICING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments