GLOW DISCHARGE BRAZING OF CERAMICS USING CHEMICAL PLATING AS PRECURSORY PROCEDURE

Abstract

Abstract: The chemical plating is used as a precursory procedure to metallize ceramics surface, and then ceramic to ceramic or to metal is brazed in glow discharge furnace without flux. It is shown by experiments that copper, chosen as the material of the plating layer, can effectively improve the brazability of ceramics. Provided the plating layer thickness is enough and the brazing parameters are suitable, a satisfactory joint, with good looking and sufficient strength and without discontinuity, can be obtained. In addition to the influences of the technological parameters, the joint microstracture and the jointing mechanism are discussed. This process can extensively be used in industry.

Key words: Ceramic Brazing, Chemical plating

CLC Number:

TG454

Zhang Yongqing Zhao Pengsheng Wang Wenxian. GLOW DISCHARGE BRAZING OF CERAMICS USING CHEMICAL PLATING AS PRECURSORY PROCEDURE[J]. , 1997, 33(5): 43-48.

[1]	GAO Dejun, WU Shaowang, YANG Shengxu, ZHANG Chenghao, ZHOU Long, SI Xiaoqing, LI Chun, QI Junlei, CAO Jian. Study on the Influences of High Temperature Treatment on the Interfacial Microstructure and Mechanical Properties of TA1/TC4 Brazed Joints [J]. Journal of Mechanical Engineering, 2024, 60(14): 109-116.
[2]	LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang. Effect of Brazing Time on TiAl Joint Brazed with TiH₂-65Ni+TiB₂ Filler [J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
[3]	WANG Xingxing, WU Gang, HE Peng, YANG Xiaohong. First-principles Calculations on Interface Behavior of Ni/WC Composite Brazed Coatings [J]. Journal of Mechanical Engineering, 2024, 60(4): 296-304.
[4]	ZHANG Jian, XIAO Ang, ZHANG Ao, LIU Junyi, ZHANG Mingjun, PENG Ping. First-principles Calculations and Experimental Study on Interface Strengthening of Brazed Diamond with Ni-Cr Filler [J]. Journal of Mechanical Engineering, 2023, 59(18): 228-238.
[5]	LI Ce, WANG Bingguang, CHANG Xufeng, MA Zhaolong, CHENG Xingwang. Research Progress on the Influence Mechanisms of βSn Structure and Grain Orientation on the Reliabilities of Solder Joints [J]. Journal of Mechanical Engineering, 2022, 58(2): 203-222.
[6]	YIN Xiaohui, XU Fan, XU Dong, DING Jianxiang, CHEN Ji, DING Zichao, CUI Bing. Research on Microstructure and Grinding Performance of Vacuum Brazed Diamond with ZrC Reinforced Cu-Sn-Ti Composite Alloys [J]. Journal of Mechanical Engineering, 2021, 57(18): 182-189.
[7]	CHANG Qing, ZHANG Lixia, SUN Zhan, SONG Yihe, ZHU Yongan. Influence of Surface Modification by Carbon Nanotube on C/C Composite Brazing Joints [J]. Journal of Mechanical Engineering, 2020, 56(8): 20-27.
[8]	LI Chun, WANG Zhiquan, SI Xiaoqing, QI Junlei, FENG Jicai, CAO Jian. Review on the Research of the Joining of Lightweight Metals and Ceramics [J]. Journal of Mechanical Engineering, 2020, 56(6): 73-84.
[9]	CAO Jian, HE Zongjing, QI Junlei, WANG Houqin, FENG Jicai. Brazing of C/C Composite to TiAl Alloy Using (Ti/Ni/Cu)_f Multi-foil Filler [J]. Journal of Mechanical Engineering, 2018, 54(9): 108-114.
[10]	LI Guodong;LI Zhuoxin;YANG Jinyu. Development of Mg-Zn-Al-Er Solder and Its Soldering Properties [J]. , 2014, 50(6): 70-74.
[11]	LIU Gang;XING Xiangli;LU Jia;LI Jianchen. Brazing of Ceramic ZrO2 /Titanium Alloy Using Amorphous Solder [J]. , 2013, 49(22): 121-127.
[12]	Li Yulong;He Peng;Feng Jicai;Yan Jiuchun. RESEARCH ON MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TiAl/40Cr JOINT OBTAINED BY INDUCTION BRAZING METHOD [J]. , 2005, 41(10): 93-96.
[13]	CHEN Hu;GONG Jianming;TU Shang-tung;JIANG Wenchun;GENG Luyang. State-of-art in Simulation of Brazing Packaging for Miniaturized Multi-channel Heat Exchanger [J]. , 2008, 44(4): 1-9.
[14]	ZHANG Liang;XUE Songbai;LU Fangyan;HAN Zongjie;YU Shenglin;LAI Zhongmin. Fatigue Life Prediction for Fine Pitch Device Soldered Joints Based on Creep Model [J]. , 2009, 45(9): 279-284.
[15]	WU Qiaoping;DENG Zhaohui;PAN Zhan;ZHANG Ronghui;ZHANG Zheng. Effect of Brazing Atmosphere on Brazing Performance of Diamond [J]. , 2012, 48(4): 51-57.

GLOW DISCHARGE BRAZING OF CERAMICS USING CHEMICAL PLATING AS PRECURSORY PROCEDURE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments