Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping

Abstract

Abstract: Tissue engineering is an important development stage of bio-manufacturing. It constructs the tissue/organs by firstly fabricating the biomaterial scaffolds, and then planting the cells on them. The performance of the scaffold is very important to the application of tissue engineering. Compared to traditional scaffold manufacturing methods, rapid prototyping technology based on dispersed-accumulated principle manufactures scaffold that has high degree of personality: the porosity, the mechanical properties, the biocompatibility and biodegradation characteristic can be set through parameter design and material selection. Therefore it is very suitable for construction of structural tissue/organs. Here kinds of tissue engineering scaffold fabricating technologies based on rapid prototyping are introduced; their features and applications are summarized; their advantages and disadvantages are analyzed and discussed.

Key words: Bio-manufacturing, Rapid prototyping, Scaffold, Tissue engineering

CLC Number:

TH 164

YAN Yongnian;LI Shengjie;XIONG Zhuo;WANG Xiaohong;ZHANG Ting;ZHANG Renji. Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping[J]. , 2010, 46(5): 93-98.

[1]	YU Kang, FU Jianzhong, HE Yong. Research Progress of Tissue Engineering Scaffolds for Soft Tissue Defect Repair [J]. Journal of Mechanical Engineering, 2024, 60(15): 255-271.
[2]	LI Wenhai, ZHANG Guangming, YU Zun, HAN Zhifeng, MA Lingxuan, PENG Zilong, XIAO Miao, XU Lin, XI Yongming, LAN Hongbo. Research Progress and Challenges of 3D Printed Conductive Biological Scaffolds [J]. Journal of Mechanical Engineering, 2023, 59(23): 186-210.
[3]	JI Xiaogang, FANG Chuang, WANG Wei. Research on the Inverse Design Method of Lattice Structure Driven by Target Parameters [J]. Journal of Mechanical Engineering, 2023, 59(23): 221-228.
[4]	ZHOU Zihong, YOU Weitao, LU Yinyu, XI Yufan, WANG Kexing, WANG Guanyun, SUN Lingyun. Shape-changing Interface Design with the User-defined Form and Self-sensing Capability [J]. Journal of Mechanical Engineering, 2023, 59(11): 84-93.
[5]	WU Chunya, WU Jiahao, WU Zheran, LI Xiguang, HUANG Junjie, CHEN Mingjun. New Progress of Biological 3D Printing Technology [J]. Journal of Mechanical Engineering, 2021, 57(5): 114-132.
[6]	GAO Ruining, LI Xiang. Design and Mechanical Properties Analysis of Radially Graded Porous Scaffolds [J]. Journal of Mechanical Engineering, 2021, 57(3): 220-226.
[7]	QU Huawei, HAN Zhenyu, ZHUO Yue, FU Hongya. Review of the Design of Porous Bio-scaffolds for Bone Tissue Engineering [J]. Journal of Mechanical Engineering, 2019, 55(15): 71-80.
[8]	YANG Lijun, ZHANG Jia, WANG Zhe, YAN Chengcheng. Analysis of the Flow Field Characteristics of Micro-pore Structure in Tissue Engineering Scaffold [J]. Journal of Mechanical Engineering, 2018, 54(20): 71-80.
[9]	LIU Jie, ZHENG Shuxian, LI Jia. Parametric Design for Skull Tissue Engineering Vascular Scaffold [J]. Journal of Mechanical Engineering, 2018, 54(1): 178-187.
[10]	MAO Wei, LIAN Qin, LI Dichen, JIA Shuhai. 3D Printing Process for Hydro Gel with the Three-dimensional Micro Tubes to Mimic Vascular Network [J]. Journal of Mechanical Engineering, 2017, 53(9): 180-186.
[11]	BAI Xingwang, ZHANG Haiou, ZHOU Xiangman, WANG Guilan. Electromagneto-fluid Coupling Simulation of Arc Rapid Prototyping Process with External High-frequency Magnetic Field [J]. Journal of Mechanical Engineering, 2016, 52(4): 60-66.
[12]	LIU Yuanyuan, LIANG Gang, LI Yu, ZHANG Yanan, LI Shuai, HU Qingxi. The 3D Printing Process and Forming System for Regenerated Scaffold Containing Microchannel Network and the Experimental Research [J]. Journal of Mechanical Engineering, 2015, 51(21): 137-147.
[13]	ZHUANG Pei;LIAN Qin;LI Dichen;HE Jiankang;BIAN Weiguo;WANG Zhen;JIN Zhongmin. Fabrication and Performance Study of Biomimetic Multi-material Osteochondral Scaffold [J]. , 2014, 50(21): 133-139.
[14]	YU Yongze;CHEN Haiping;HU Qingxi. Finite Element Simulation of Bio-gel Micropore Extrudate Swell and Three-dimensional Printing Manufacturing [J]. , 2014, 50(19): 151-157.
[15]	LI Dichen;HE Jiankang;TIAN Xiaoyong;LIU Yaxiong;ZHANG Anfeng;LIAN Qin;JIN Zhongmin;LU Bingheng. Additive Manufacturing：Integrated Fabrication of Macro/Microstructures [J]. , 2013, 49(6): 129-135.

Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments