STUDY ON AUTO BODY PARAMETRIC FE MODEL & ITS APPLICATION

Abstract

Abstract: The parametric FE model of three-box type body is created. The development platform of auto body concept design is created according to the development process and the characteristic of auto body concept design, which included most analysis and optimization method of development and realized integration of three-box type body FE model and development platform. This make designers can control the process of concept design auto body under a unified operational condition. The research presents that, this system can carry out the integration of CAD/CAE in early auto body development, enhance the efficiency of project selected and the reliability of structure designed. It has good flexible and make design efficiency improve.

Key words: Car bodies, Finite elements, Parameters, Structural analysis

CLC Number:

U462

Zhuang Weimin;Lan fengchong;Yu Duonian;Chen Dongping. STUDY ON AUTO BODY PARAMETRIC FE MODEL & ITS APPLICATION[J]. , 2004, 40(7): 145-149,.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I7/145

[1]	LI Haoran, ZHOU Haichao, WANG Guolin, ZHANG Rongyun, ZHAO Chunlai. Road Friction Coefficient and Tire Cornering Characteristics Parameters Estimation Based on PMSM Sensorless Control [J]. Journal of Mechanical Engineering, 2026, 62(8): 196-209.
[2]	CHEN Wenting, WANG Wenlong, ZHANG Zhen, AI Chao, ZHANG Jiarui, DU Zeli. Study on Variable Speed Constant Frequency Control of Pump-motor Systems Considering Slow Time-varying Parameters [J]. Journal of Mechanical Engineering, 2026, 62(2): 455-470.
[3]	PEI Shiyuan, HU Dejian, QIN Chuan, ZHANG Lei. Analysis and Optimization Design of Lubrication Load Characteristics for Large Dual-flow Oil Seal Pads under High Hydrogen Pressure with Multiple Coupling Fields [J]. Journal of Mechanical Engineering, 2026, 62(1): 272-284.
[4]	GUO Erkuo, LIU Shulong, CHEN Ziyan, QIAO Hua, LIU Deyong, CHEN Ming. Review of Power Skiving Theory and Method for Gear Manufacturing [J]. Journal of Mechanical Engineering, 2025, 61(9): 335-349.
[5]	LUAN Wenlin, WANG Yuanding, WANG Haoming, LIU Yan, LI Xianglong, XU Fangcheng. Theoretical Analysis on the Impact of Spiral Groove Structural Parameters on Static Characteristics of Novel Hybrid Gas Foil Thrust Bearing with Spiral Grooves [J]. Journal of Mechanical Engineering, 2025, 61(9): 358-371.
[6]	MA Qiang, LIU Congzhen, ZHAO Pengbin, WANG Peng, LI Aiqiang. Analysis and Optimization of Tire Rolling Resistance under Composite Working Conditions [J]. Journal of Mechanical Engineering, 2025, 61(9): 437-448.
[7]	FU Ling, YI Bin, YIN Li, XUE Dingqi, REN Huili, WANG Jiangchao. Effect of Size and Number of Induction Heating during Welding Process on Buckling Distortion Induced by Welding [J]. Journal of Mechanical Engineering, 2025, 61(6): 112-120.
[8]	HU Zhili, LU Junjie, WEI Pengfei, HUA Lin. Investigation of the Deformation Characteristics and Mechanical Properties of Al-Zn-Mg-Cu Alloy Subjected to Pre-aged Hardening Forming [J]. Journal of Mechanical Engineering, 2025, 61(6): 160-173.
[9]	HAN Yuze, LIU Yanpeng, REN Mingfa, ZU Lei, HE Jingxuan. Influence and Optimization of the Process Parameter Coupling of the Gap between Squeezer Rollers on the Properties of Composite Wet Winding Products [J]. Journal of Mechanical Engineering, 2025, 61(5): 354-363.
[10]	WANG Wei, LI Xiaoxu, LIU Weijun, BIAN Hongyou, XING Fei, WANG Jing. Modeling and Multi-objective Optimization of Laser Cleaning Quality of 7075 Aluminum Alloy [J]. Journal of Mechanical Engineering, 2025, 61(3): 422-439.
[11]	HU Zhe, CHI Maoru, ZHOU Yabo, DAI Liangcheng, LIANG Shulin, CHEN Jianzheng, SUN Jianfeng. Mechanism of Tail Lateral Sway of City EMUs in Single-track Tunnel [J]. Journal of Mechanical Engineering, 2025, 61(20): 204-212.
[12]	LAN Hong, ZHANG Jiye, CAI Lu, LOU Zhen. Research on the Impact of Ice Parameters on the Icing of Bogie Region [J]. Journal of Mechanical Engineering, 2025, 61(20): 234-242.
[13]	LI Shujian, LI Qingqing, YANG Peng, LIU Xiangyu, LI Changping, LI Pengnan. Outlet Damage Mechanism and Multi Parameter Optimization Design for CFRP Interlaminar Drilling [J]. Journal of Mechanical Engineering, 2025, 61(19): 430-442.
[14]	ZHU Zhiwei, XIA Haiwei, XU Ya, XU Jianghai. Research on Process Parameters of Room-temperature Molding Quality of Fused Silica [J]. Journal of Mechanical Engineering, 2025, 61(18): 98-106.
[15]	PAN Rui, DONG Zhisen, CHEN Shujun. Advance and Prospects of Nanosecond Laser Welding Technology [J]. Journal of Mechanical Engineering, 2025, 61(17): 171-192.

STUDY ON AUTO BODY PARAMETRIC FE MODEL & ITS APPLICATION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments