INTEGRATED CAD/CAM SYSTEM IN MICROCOMPUTER FOR COMPONENT (SS-CADAM)

Abstract

Abstract: SS-CADAM system is based on practice, its objects are straightening rolls and shafts. In realizing CAD/CAM integration, it made research mainly in four aspect. They are: (1) Component description and information input; (2) Information exchange between CAD and CAM system; (3) Data structure of component; (4) Automatical NC programming and computer simulation of NC machining. Among these the unique component data structure which based on DXF file of Auto CAD software efficiently realize transferring of geometrical and technological information in CAD and CAM integration. It has common significance in building CAD/CAM integration system.

Key words: CAD/CAM, Shaft

Li Jing;Lao Mingden. INTEGRATED CAD/CAM SYSTEM IN MICROCOMPUTER FOR COMPONENT (SS-CADAM)[J]. , 1995, 31(1): 15-22.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1995/V31/I1/15

[1]	LIU Dongning, GE Yanjun, YANG Junyue, LIU Fang. Calculation of Eccentric Magnetic Field and Dynamic Characteristics Analysis of Multi-shafts Ring-plate Magnet Gear [J]. Journal of Mechanical Engineering, 2025, 61(9): 372-382.
[2]	DAI Qiyi, HAN Qinkai, QIN Zhaoye, CHU Fulei. Dynamic Modeling and Parametric Instability Analysis of Rotating Composite Shafts Under Periodic Axial Loads [J]. Journal of Mechanical Engineering, 2025, 61(7): 396-405.
[3]	LI Xuejun, LIAO Haize, TANG Hujiao, ZHOU Xianwen. Modeling the Probability of Oil Film EDM Breakdown in High Power Inverter Motor Bearings [J]. Journal of Mechanical Engineering, 2025, 61(17): 137-149.
[4]	LIN Longfei, WANG Baoyu, GUO Wei, PENG Wenfei, WU Xiaocheng, HUANG Minghui. Modeling and Analysis of Central Damage of Cross Wedge Rolling Railway Axles Based on Hybrid Damage Criterion [J]. Journal of Mechanical Engineering, 2025, 61(12): 141-152.
[5]	WANG Yaxiao, WANG Hongxi, TIAN Huihui. Research on Coupling Parameter Evaluation Algorithm for Crankshaft Rod Journal [J]. Journal of Mechanical Engineering, 2025, 61(11): 119-130.
[6]	YANG Yang, HU Minghui, JIANG Zhinong, LU Ziyuan. Fault Diagnosis of Intershaft Bearing without Key-phase Signal Driven by Multi-component Synchroextracting Transform [J]. Journal of Mechanical Engineering, 2024, 60(16): 83-97.
[7]	CHENG Jianwei, BU Wenjun, SHI Liang, ZHANG Yuanchao, ZHAO Jingmin. Research on the Self-recovery and Control Method of Hull Deformation Alignment Offset Based on Structure Adaptation [J]. Journal of Mechanical Engineering, 2023, 59(18): 22-30.
[8]	YI Cong, DU Jianjun, YIN Jixiong, ZHU Haibin, DENG Weikun, BAI Baoliang, FU Congyi. Running Condition Identification of High-speed Shaft Based on Shaft-end-data Driven LSTM-CNN [J]. Journal of Mechanical Engineering, 2023, 59(1): 131-140.
[9]	XU Xiangyang, LI Long, REN Bo, ZHU Caichao. Study on the Dynamic Characteristics of Herringbone Planetary Gear System with Space Shafts Angle [J]. Journal of Mechanical Engineering, 2023, 59(1): 141-150.
[10]	GAO Peng, HOU Lei, CHEN Yu-shu. Dynamic Load of the Inter-Shaft Bearing and Its Influence on Bearing’s Temperature [J]. Journal of Mechanical Engineering, 2022, 58(5): 87-97.
[11]	MENG Qing-dang, ZHAO Jun, MU Zhen-kai, ZHANG Yu, YU Gao-chao. Numerical Simulation Research on Straightening Process of Small and Medium-sized Shaft Parts by Rotational Bending [J]. Journal of Mechanical Engineering, 2022, 58(22): 208-218.
[12]	XU Tie, ZHONG Jianfeng, ZHONG Shuncong, ZHANG Qiukun, PENG Zhike, ZHANG Yan, LUO Manting. Vision-based Displacement-sensitive Fringe Pattern for Identification of Crack in Rotating Shaft [J]. Journal of Mechanical Engineering, 2022, 58(20): 304-311.
[13]	LI Chao, BIN Guangfu, LI Jian, WANG Weimin. Influence of Sand Particle Size on the Erosive Wear of Compressor Blade in an Aero-turboshaft Engine [J]. Journal of Mechanical Engineering, 2022, 58(19): 180-190.
[14]	FENG Huayuan, SHANGGUAN Wenbin, KANG Yingzi. Interval Optimization for Generated Axial Force of Drive Shaft Systems Considering Rough Surface Characteristics [J]. Journal of Mechanical Engineering, 2022, 58(1): 221-230.
[15]	LIU Tao, DENG Zhaohui, LUO Chengyao, Lü Lishu, LI Zhongyang, WAN Linlin. Stability Modeling and Analysis of Non-circular High-speed Grinding with Consideration of Dynamic Grinding Depth [J]. Journal of Mechanical Engineering, 2021, 57(15): 264-274.

INTEGRATED CAD/CAM SYSTEM IN MICROCOMPUTER FOR COMPONENT (SS-CADAM)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments