Running Condition Identification of High-speed Shaft Based on Shaft-end-data Driven LSTM-CNN

doi:10.3901/JME.2023.01.131

Abstract

Abstract: Aiming at the problem that it is difficult to accurately real-time monitor and identify the running condition of high-speed shafts with complex structures, a composite neural network shaft running condition identification method based on the shaft-end-data driven is proposed. Firstly, a composite neural network model (LSTM-CNN) based on Long short-term memory (LSTM) and Convolutional neural networks (CNN) is proposed. A dual-disk shaft dynamics simulation model is then established. The Newmark-β method is used to numerically solve the shaft system for acquiring the dynamic response characteristics of the key fixed nodes of the shaft system; at the same time, the dynamic response characteristics of the key rotating nodes are obtained based on the finite element simulation. Two types of data are input into the LSTM-CNN model for running condition identification, and its accuracy and efficiency are compared and analyzed. Finally, a high-speed shaft experimental platform is designed and established, and the shaft-end data and fixed-end data are respectively used to train and test the LSTM-CNN model. The performance of different models for the running condition identification of the high-speed shaft is compared. Simulation and experimental verification analysis results show that the shaft-end-data driven LSTM-CNN have better running condition identification accuracy and efficiency than that based on the fixed-end-data driven.

Key words: high speed shaft, in-situ measurement, compound neural network, running condition identification

CLC Number:

TH17

YI Cong, DU Jianjun, YIN Jixiong, ZHU Haibin, DENG Weikun, BAI Baoliang, FU Congyi. Running Condition Identification of High-speed Shaft Based on Shaft-end-data Driven LSTM-CNN[J]. Journal of Mechanical Engineering, 2023, 59(1): 131-140.

References

[1] 李贵三, 张正松, 唐锡宽. 大型高速旋转机械故障特征及其识别[J]. 石油化工设备技术, 1991, 12(1):45-49. LI Guisan, ZHANG Zhengsong, TANG Xikuan. Fault characteristics and identification of large-scale high-speed rotating machinery[J]. Petrochemical Equipment Technology, 1991, 12(1):45-49.
[2] LU Q, YANG R, ZHONG M, et al. An improved fault diagnosis method of rotating machinery using sensitive features and RLS-BP neural network[J]. IEEE Transactions on Instrumentation and Measurement, 2020, 69(4):1585-1593.
[3] JIA Z, LIU Z, VONG C, et al. A rotating machinery fault diagnosis method based on feature learning of thermal images[J]. IEEE Access, 2019, 7:12348-12359.
[4] HE Y, LIU Y, SHAO S, et al. Application of CNN-LSTM in gradual changing fault diagnosis of rod pumping system[J]. Mathematical Problems in Engineering, 2019, 2019:1-9.
[5] PARK M, LEE J, KANG W, et al. Predictive model for PV power generation using RNN (LSTM)[J]. Journal of Mechanical Science and Technology, 2021, 35:795-803.
[6] SHANG S, LUO Q, ZHAO J, et al. LSTM-CNN network for human activity recognition using WiFi CSI data[J]. Journal of Physics:Conference Series, 2021, 1883(1).
[7] HUANG T, ZHANG Q, TANG X, et al. A novel fault diagnosis method based on CNN and LSTM and its application in fault diagnosis for complex systems[J]. Artificial Intelligence Review, 2022, 55:1289-1316.
[8] SHAO B, HU X, BIAN G, et al. A multichannel LSTM-CNN method for fault diagnosis of chemical process[J]. Mathematical Problems in Engineering, 2019, 2019:1-14.
[9] RAI P, LONDHE N, RAJ R. Fault classification in power system distribution network integrated with distributed generators using CNN[J]. Electric Power Systems Research, 2021, 192:106914.
[10] JIANG P, CONG H, WANG J, et al. Fault diagnosis of gearbox in multiple conditions based on fine-grained classification CNN algorithm[J]. Shock and Vibration, 2020, 2020:9238908.
[11] 付文秀, 李弘扬, 靳东明. 基于LSTM的列车测速测距设备故障诊断[J]. 北京交通大学学报, 2020, 44(2):9-16. FU Wenxiu, LI Hongyang, JIN Dongming. Fault diagnosis of train speed and ranging equipment based on LSTM[J]. Journal of Beijing Jiaotong University, 2020, 44(2):9-16.
[12] BELAGOUNE S, BALI N, BAKDI A, et al. Deep learning through LSTM classification and regression for transmission line fault detection, diagnosis and location in large-scale multi-machine power systems[J]. Measurement, 2021, 177:109330.
[13] 沈涛, 李舜酩. 针对滚动轴承故障的批标准化CNN-LSTM诊断方法[J]. 计算机集成制造系统, 2021, 27(3):583-596. SHEN Tao, LI Shunming. CNN-LSTM method with batch normalization for rolling bearing fault diagnosis[J]. Computer Integrated Manufacturing Systems, 2021, 27(3):583-598.
[14] TANG X, WANG J, LU J, et al. Improving bearing fault diagnosis using maximum information coefficient based feature selection[J]. Applied Sciences, 2018, 8(11):2143.
[15] BEATTY R. Differentiating rotor response due to radial rubbing[J]. Journal of Vibration, Acoustics, Stress, and Reliability in Design, 1985, 107(2):151-160.
[16] CHU F, LU W. Determination of the rubbing location in a multi-disk rotor system by means of dynamic stiffness identification[J]. Journal of Sound and Vibration, 2001, 248(2):235-246.
[17] GAN C, CHEN Y, CUI X, et al. Investigation of rotor strength and rotor dynamics for high-speed high-power switched reluctance machines[J]. IET Electric Power Applications, 2020, 14(9):1624-1630.
[18] CHEN S, HANSEN J, TORTORELLI D. Unconditionally energy stable implicit time integration:Application to multibody system analysis and design[J]. International Journal for Numerical Methods in Engineering, 2000, 48(6):791-822.
[19] 陈昱, 吴宗莲, 龙胜刚. 高速旋转应变遥测系统在发动机试验中的应用[C]. 第三届中国航空学会青年科技论坛, 中国贵州贵阳, 2008. CHEN Yu, WU Zonglian, LONG Shenggang. Application of high-speed rotating strain telemetry system in engine test[C]. The 3rd China Aeronautical Society Youth Science and Technology Forum, Guiyang, Guizhou, China, 2008.