REVIEW OF THE PRINCIPAL TECHNOLOGY AND METHOD FOR FAILURE ANALYSIS AND SAFETY ASSESSMENT

Abstract

Abstract: The principal technology and method of failure analysis and safety assessment are reviewed. At first, the importance and functions of failure analysis and safety assessment were discussed systematically in the advance of sience and techno logy. Then, the basic train of thought, main technology and methods of failure analysis and safety assessment are approached respectively more comprehesively. The enlightenment and help will be obtained from this paper for further development of failure analysis and prevention.

Key words: Failure analysis, Failure model, Failure prevention, Safety assessment

Zhong Qunpeng;Tian Yongjiang;Zhang Zheng. REVIEW OF THE PRINCIPAL TECHNOLOGY AND METHOD FOR FAILURE ANALYSIS AND SAFETY ASSESSMENT[J]. , 1993, 29(5): 20-27.

[1]	DAI Minghua, HU Ping, YING Liang, CHEN Shuai, WANG Yongqing, HAN Xiaoqiang. Modeling Study on Failure Behavior of Quenched Hot Forming Boron Steel Considering Damage [J]. Journal of Mechanical Engineering, 2024, 60(6): 218-226.
[2]	TANG Xiaolin, YANG Jianying, YANG Kai, LI Wenbo. Research on Multi-vehicle Cooperative Control Method for Autonomous Driving at Unsignalized Intersections [J]. Journal of Mechanical Engineering, 2024, 60(20): 217-228.
[3]	YU Haiyan, HE Hongwei, XING Ping. Development of Carbon Fiber Reinforced Plastic Failure Models Considering Different Stiffness Degradation Modes [J]. Journal of Mechanical Engineering, 2024, 60(2): 197-208.
[4]	DING Hao-xu, ZHU Tao, XIAO Shou-ne, WANG Xiao-rui, YANG Guang-wu, YANG Bing. Characterization of Failure Behaviour of SUS301L-MT Stainless Steel [J]. Journal of Mechanical Engineering, 2023, 59(8): 99-110.
[5]	GUO Lei, LIU Jianhua, XIA Huanxiong, AO Xiaohui. Analysis of Adhesion Performance of Porcelain-like Anodized Aluminum-alloy Surface for Precision Instruments [J]. Journal of Mechanical Engineering, 2023, 59(12): 236-244.
[6]	ZHANG Yanlong,ZHAI Denghui,XU Dan,ZHANG Zibiao. Intelligent Classify Methods Based on Machine Learning for Convertor Station Failure Analysis Report [J]. Journal of Electrical Engineering, 2019, 14(1): 83-88.
[7]	QIU Lifang, WANG Jinglin, LIU Ningning. Design and Analysis of IST-LEJ Based on Tension Band Parameters [J]. Journal of Mechanical Engineering, 2018, 54(13): 94-101.
[8]	SUN Wei, ZHU Ye, HUO Junzhou, HUANG Xiaoqi. Predict and Analysis the Locations of Fatigue Crack in TBM Cutterhead Based on Crack Failure Regions Division [J]. Journal of Mechanical Engineering, 2018, 54(1): 27-35.
[9]	CHENG Xiyun;XIAO Shu;HE Jun. Experiment Study of Influences of Gradient Structure on the Bonding Strength and Impact Resistance of Al2O3 Ceramic Coatings [J]. , 2014, 50(10): 87-92.
[10]	DENG Zongquan;TIAN Ye;TANG Dewei;JIANG Shengyuan;QUAN Qiquan;XIAO Hong. Research on New Structure Coring Bit for Extraterrestrial Bodies Exploration [J]. , 2013, 49(19): 104-110.
[11]	Song Guangxiong;Zhang Zheng;Zhong Qunpeng. APPLICATION OF A WEB-BASED IDENTIFICATION SYSTEM FOR CORROSION FAILURE MODE AND CAUSES [J]. , 2005, 41(2): 182-186.
[12]	Xu Gening;Wang Jianmin;Gao Youshan;Wang Wenhong. RESEARCH ON ANALYSIS METHOD OF GENERALIZED STRENGTH FAILURE MODEL FOR STEEL STRUCTURE SYSTEM [J]. , 2003, 39(4): 39-43.
[13]	Zuo Shangzhi;Zhong Qunpeng. RELIABILITY SAFETY GRADE ASSESSMENT TECHNIQUE AND METHOD BASED ON R6 REGULATION [J]. , 2001, 37(11): 32-35.
[14]	Sun Youchao;Shi Jun. RELIABILITY ASSESSMENT OF THE ENTROPY METHOD FOR THE SYSTEMS CONSISTING OF IDENTICAL SUCCESS-FAILURE MODEL UNITS [J]. , 1999, 35(6): 25-28.
[15]	Wang Xiaoli;Gui Changlin;Zhu Tingbin;Yang Zhengyu;Liang Huifang. FUNCTION DESIGN OF TROUBLE DIAGNOSIS AND FAILURE ANALYSIS OF LUBRICATING GREASE DATABASE [J]. , 1997, 33(2): 99-105，.

REVIEW OF THE PRINCIPAL TECHNOLOGY AND METHOD FOR FAILURE ANALYSIS AND SAFETY ASSESSMENT

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments