LATHE STATIC RIGIDITY TESTER AND THE CAT SYSTEM

Abstract

Abstract: On the basis of analysis of forced and structural feature of a turning system, new type of lathe static rigidity tester has been developed. The tester combining microcomputer etc. constitute a CAT system, which makes loading on and off, sampling, and data processing, etc, finished automatically. It can directly draw, display and print rigidity curves, and makes the whole testing process rapid, accurate and audio-visual. This system can be widely used in production and teaching.

Key words: A/D转换器, CTA, 静刚度

Chen Fangrong;Liu Siyang;Zhang Jinsheng;Liu Dazhi. LATHE STATIC RIGIDITY TESTER AND THE CAT SYSTEM[J]. , 1992, 28(1): 82-85.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1992/V28/I1/82

[1]	ZHAO Penghao, LIU Jianhua, GONG Hao, WANG Xingjie. Sub-regional Virtual Material Equivalent Modeling of Joint Interface Based on Fractal Contact Theory and Semi-analytical Method [J]. Journal of Mechanical Engineering, 2026, 62(5): 230-243.
[2]	LIAN Yizhang, ZHANG Xueliang, LIAO Shanjun. Research on Contact Fractal Model of Rough Surfaces with Hard Coatings [J]. Journal of Mechanical Engineering, 2025, 61(23): 280-291.
[3]	LIU Shuai, YUAN Yuan, LIU Chenxi, QIAO Luqun. Research on the Truncated Asperity Size Distribution Function for the Two-dimensional Fractal Profiles [J]. Journal of Mechanical Engineering, 2025, 61(21): 329-344.
[4]	TANG Shifa, YIN Bifeng, WANG Jian, ZHANG Jun, ZHI Feng. Multi-objective Optimization Design of Multi-mode Non-contact Selectable One-way Clutch for Hybrid Commercial Vehicles [J]. Journal of Mechanical Engineering, 2025, 61(17): 233-244.
[5]	XIE Yucai, HU Shukui, BAI Chenzhao, SHI Haotian, ZHANG Hongpeng. Triple-coil Sensor Design for Metal Abrasive Particle Detection in Oil [J]. Journal of Mechanical Engineering, 2025, 61(12): 50-59.
[6]	SUN Yunyun, YU Xin, WU Shijing, LIU Sheng. Study on the Contact Load and Oil Film Thickness of Rough Fractal Interface under Mixed Lubrication [J]. Journal of Mechanical Engineering, 2025, 61(11): 231-243.
[7]	LIU Siyuan, AI Chao, YU Chunsong, ZHANG Weizhe, CHEN Wenting, KANG Wei. Evaluation Method of Slipper Pair Performance Degradation State Based on Multi-parameter Intelligent Fusion of Deep Belief Network [J]. Journal of Mechanical Engineering, 2024, 60(4): 178-188.
[8]	JI Jiaxin, PENG Cheng, XIANG Chong, HUANG Le, GUO Fei. A Method for Predicting the Wear Life of the Step Seal Considering Variable Speed Conditions [J]. Journal of Mechanical Engineering, 2024, 60(3): 191-202.
[9]	WANG Yifei, HE Wang, CHEN Tingting, CUI Licong, WANG Hongbo, YU Bingjun, QIAN Linmao. Research on Friction-induced Selective Etching for Low Reflectance Germanium Surface [J]. Journal of Mechanical Engineering, 2024, 60(23): 294-303.
[10]	HAO Ruican, LIU Huagang, WANG Shang, XING Feifei, LI Decai. Research on Solenoid Self-inductance Sensor with Magnetic Fluid [J]. Journal of Mechanical Engineering, 2024, 60(22): 212-223.
[11]	WANG Jianbin, YAO Xin, ZHANG Dafu, LI Dadi, QU Sheng. Research on the Iteration Algorithm of the Wheel and Rail Contact Geometry Constraint Equations [J]. Journal of Mechanical Engineering, 2024, 60(2): 234-242.
[12]	WANG Cheng-jie, YU Shuang, BAI Chen-chao, YANG Chao-xu, ZHANG Hong-peng, WANG Shuai, SUN Yu-qing, LI Guo-bin. Research on a High Sensitivity Hydraulic Oil Contaminant Detection Sensor [J]. Journal of Mechanical Engineering, 2023, 59(8): 42-49.
[13]	ZHANG Yongfei, LU Wenqi, YANG Liangliang, WU Wenjun, ZHU Qixin. Sensorless Vector Control System of Synchronous Reluctance Motor Based on Hybrid Control in Full Speed Domain [J]. Journal of Mechanical Engineering, 2023, 59(5): 223-234.
[14]	LEI Junjie, LIU Meihong, HU Xiangping, WANG Juan, WANG Xueliang. Analysis of Wear Characteristics of Elliptic Arc Finger Seal Based on Fractal Theory [J]. Journal of Mechanical Engineering, 2023, 59(3): 144-157.
[15]	ZHOU Kai, LUO Chaofeng, HU Zhijian, YAN Lixiong, BI Ruyu, DENG Ke, LI Yulei. Substation Platen State Recognition Based on YC_bC_r Color Segmentation and Feature Analysis [J]. Journal of Electrical Engineering, 2023, 18(3): 285-296.

LATHE STATIC RIGIDITY TESTER AND THE CAT SYSTEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments