STUDY ON THE TOLERANCE IN 4-COORDINATE SIDE MILLING OF RULED SURFACE

Abstract

Abstract: The tolerance existing in the 4-coordinate side milling is classified into two types: the tolerance caused by the limitation of 4-coordinate NC machining and the tolerance caused by the different direction of the normal vector, the reasons are discussed and the calculating formulae of the two kinds of tolerance are given respectively. The distribution of the tolerance caused by the different direction of the normal vector along the straight generator line and an algorithm to decrease it is also given.

Key words: 4-coordinate, Ruled surface, Side milling, Tolerance

CLC Number:

TH164 TP391.7

Jiao Jianbin;Yu Hua. STUDY ON THE TOLERANCE IN 4-COORDINATE SIDE MILLING OF RULED SURFACE[J]. , 2001, 37(4): 44-47.

[1]	DING Ruqi, XIONG Wenjie, CHENG Min, XU Bing. Safety Performance Evaluation of the Intelligent Independent-metering Electro-hydraulic Control System [J]. Journal of Mechanical Engineering, 2024, 60(4): 101-112.
[2]	ZHU Bing, Lü Tian, ZHAO Jian, CHEN Zhicheng, WU Jian. Fault Diagnosis and Fault-tolerance Strategy of Current Sensor for Redundant Steering System [J]. Journal of Mechanical Engineering, 2024, 60(10): 413-424.
[3]	LI Guohua, HAN Ying, LI Feng, LIU Ming. Hysteresis SVPWM Fault-tolerant Control Method for Seven-level MPUC Inverter [J]. Journal of Electrical Engineering, 2023, 18(3): 216-223.
[4]	XIAO Yuan, HU Bin, SHEN Gongtian, CHEN Tao, LIU Shujuan, ZHANG Yong, CHEN Weiwei. Research on the Passenger Acceleration Influence Analysis on Safety and Comfort and Its Design Method of Amusement Rides [J]. Journal of Mechanical Engineering, 2023, 59(2): 281-290.
[5]	HOU Xinyao, NI Qiang, LI Xueming, HUANG Qing. Real-time Fault Diagnosis and Fault-tolerant Estimation of Temperature Sensor in Train Traction Drive System [J]. Journal of Electrical Engineering, 2023, 18(2): 269-276.
[6]	GAO Zhenhai, YU Tong, SUN Tianjun, TANG Minghong, GAO Fei, ZHAO Rui. Humanoid-driven Control Network Model for Longitudinal Autonomous Driving [J]. Journal of Mechanical Engineering, 2023, 59(18): 251-262.
[7]	XING Shixiong, JIANG Zhigang, ZHU Shuo, ZHANG Hua. Research on Optimization Method for Parts Selection of Remanufactured Products Under Dimensional Accuracy Constraints [J]. Journal of Mechanical Engineering, 2022, 58(19): 221-228.
[8]	LIU Xiaoming, JIANG Wentao, ZHANG Xusong, CHEN Hai, HAN Xu. Multi-objective Optimization of Retaining Unit of Actuator for Fast Vacuum Circuit Switch Considering Tolerance Uncertainty [J]. Journal of Mechanical Engineering, 2022, 58(17): 58-66.
[9]	LUO Chen, NIE Jiaqi, ZHOU Yijun. An Improved Tolerance Modeling Method Based on Bézier Parametric Space Envelope [J]. Journal of Mechanical Engineering, 2021, 57(9): 183-190.
[10]	LIU Jianhua, ZHANG Zhiqiang, XIA Huanxiong, GONG Hao, SHAO Nan. Assembly Accuracy Analysis with Consideration of Form Defects and Surface Deformations [J]. Journal of Mechanical Engineering, 2021, 57(3): 207-219.
[11]	WANG Zhixiang, LEI Yongjun, ZHANG Dapeng, OUYANG Xing, WANG Jie. Optimization of Cylindrical Stiffened Shells in Large Launch Vehicles Considering Manufacturing Tolerance [J]. Journal of Mechanical Engineering, 2021, 57(18): 190-203.
[12]	YU Peishi, ZHAO Junhua, GUO Wanlin. Three-dimensional Damage Tolerance Design: Out-of-plane Constraint Theory and Fatigue/Fracture Criteria [J]. Journal of Mechanical Engineering, 2021, 57(16): 87-105.
[13]	WU Shengchuan, XIE Cheng, HU Yanan, WU Zhengkai, KANG Guozheng. Defect Tolerance Assessment Method of Fusion Welded Medium and High Strength Al Alloy Joints [J]. Journal of Mechanical Engineering, 2020, 56(8): 46-59.
[14]	ZHAO Feifei, CAO Kaituo, BAO Hong, GAO Guoming. Deformation Field Reconstruction of Timoshenko Beam and Optimization of Sensor Placement [J]. Journal of Mechanical Engineering, 2020, 56(20): 1-11.
[15]	WANG Lina, TIAN Wenjie, ZHANG Dawei, GAO Weiguo. Research on Determination Method of Geometric Accuracy Design Index of CNC Machine Tools [J]. Journal of Mechanical Engineering, 2020, 56(1): 166-174.

STUDY ON THE TOLERANCE IN 4-COORDINATE SIDE MILLING OF RULED SURFACE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments