Surface Emissivity Calibration for Metal Cutting Tool and Workpiece Materials with Infrared Imager

Abstract

Abstract: The surface emissivities of medium carbon steel and die/mold steel, common carbide and coated carbide are calibrated with an infrared imager within the temperature range of 300～900 ℃. The heat radiation influence of the heating stove environment on the specimens is considered, and the effects of temperature, surface structure and geometry of the specimens on their surface emissivity are analyzed. The investigation results indicate: with the increase of temperature, the emissivities of these steels increase, but the die/mold steel keeps a small emissivity within a relatively wide temperature range; the sample surface evenness influences the surface emissivity; the coated tool keeps a stable and quite small surface emissivity.

Key words: Carbon steel, Cutting tool, Die / mold steel, Environment radiation, Surface emissivity

CLC Number:

TN219 TG501.1

QUAN Yanming;ZHAO Jing;LI Yiping. Surface Emissivity Calibration for Metal Cutting Tool and Workpiece Materials with Infrared Imager[J]. , 2009, 45(12): 182-186.

[1]	ZHAO Xikun, LI Congbo, YANG Yong, Lü Yan, JIANG Shuyan. A Data and Model Hybrid Driven Cutting Parameter Energy-efficiency Optimization Method for Flexible Machining Process Considering Cutting Tool Flexibility [J]. Journal of Mechanical Engineering, 2024, 60(7): 236-248.
[2]	REN Zhongkai, LI He, XU Yanan, CHENG Qian, FENG Hao, WANG Tao. Constitutive Model and Microstructural Evolution for Tensile Behavior of Carbon Steel Ultrathin Strip under Pulsed Electric Field [J]. Journal of Mechanical Engineering, 2024, 60(6): 245-260.
[3]	CHEN Yonghua, SUN Zhenguo, ZHANG Wen, CHEN Qiang. Research on High Efficiency Weld Modification Technology for Wall-climbing Robot [J]. Journal of Mechanical Engineering, 2023, 59(9): 12-19.
[4]	YE Wenchang, GUO Bicheng, DENG Zhaohui, WANG Wei, ZOU Lingli, LIU Chao, YIN Ganggang, JIANG Feng. Advances in Key Technologies of the Intelligence Tool [J]. Journal of Mechanical Engineering, 2023, 59(23): 265-282.
[5]	JIA Zhenyuan, FU Rao, WANG Fuji. Research Advance Review of Machining Technology for Carbon Fiber Reinforced Polymer Composite Components [J]. Journal of Mechanical Engineering, 2023, 59(19): 348-374.
[6]	ZHANG Tianze, WEI Zhaocheng, WANG Minjie. Research on Profile Curve of Rectangular Billets in Continuous Casting Based on Solidification and Shrinkage Characteristics [J]. Journal of Mechanical Engineering, 2022, 58(21): 285-296.
[7]	MA Jing, ZHANG Mingjian, LIU Qiang, LIU Xianli, YUE Caixu, YANG Shaocheng. A Review of the Research Progress of Bionic Cutting Tools [J]. Journal of Mechanical Engineering, 2022, 58(13): 261-281.
[8]	LIU Qiang, ZHANG Haijun, LIU Xianli, GAO Dayong, ZHANG Mingjian. A Review of Research on Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2021, 57(21): 248-268.
[9]	LU Xiaolong, TIAN Guiyun, XIONG Longhui, GAO Bin, WU Jianbo, MIAO Ling. Study on the On-line Detection and Speed Effect of Rail RCFs Using Airflow Thermography [J]. Journal of Mechanical Engineering, 2021, 57(18): 98-106.
[10]	LIU Xianli, LI Xuebing, DING Mingna, YUE Caixu, WANG Lihui, LIANG Yuesheng, ZHANG Bowen. Intelligent Management and Control Technology of Cutting Tool Life-cycle for Intelligent Manufacturing [J]. Journal of Mechanical Engineering, 2021, 57(10): 196-219.
[11]	ZHANG Wei, YAN Zhijie, WANG Rui, LI Dazhao, KANG Yan, WU Zhonghao, YANG Xiaomin. Hot Deformation Behavior and Recrystallization Structure of Fe-1.3C-5Cr-0.4Mo-0.4V Ultra High Carbon Steel [J]. Journal of Mechanical Engineering, 2020, 56(12): 116-123.
[12]	ZHANG Boyang, LI Shuo, ZHANG Qingdong, LIU Jiyang, ZHANG Liyuan. Effect of Surface Micromorphology on the Deformation and Bonding Quality of Stainless Steel/Carbon Steel during Hot Isostatic Pressing [J]. Journal of Mechanical Engineering, 2019, 55(10): 62-69.
[13]	NIU Jiangchuan, HAN Litao, LI Sujuan, GUO Jingbo, LIU Jinzhi. Research on Shield Cutting Tool Configuration Based on PSO-BP Neural Network [J]. Journal of Mechanical Engineering, 2018, 54(10): 167-172.
[14]	CUI Yunxian, ZHANG Bowen, DING Wanyu, YAN Changgang, LIU Yi. Research on the Cutting Tool with Intelligent Transient Temperature Measuring System [J]. Journal of Mechanical Engineering, 2017, 53(21): 174-180.
[15]	YIN Anmin, YANG Quan, HE Fei, WANG Xiaochen, DONG Feng, WANG Yanlong, SHU Xuedao. Grain Size Measurement in Low Carbon Steel Sheets by Laser Ultrasonics [J]. Journal of Mechanical Engineering, 2017, 53(2): 11-19.

Surface Emissivity Calibration for Metal Cutting Tool and Workpiece Materials with Infrared Imager

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments