LUBRICATING ANALYSIS FOR DYNAMIC LOAD JOURNAL BEARING CONSIDERING SURFACE ROUGHNESS EFFECTS

Abstract

Abstract: The average flow model and Hahn method are integrated for the first time and the numerical method on the lubricating analysis of the dynamic load rough journal bearing is put forward. Furthermore, the effects of different variance ratio of the journal, surface pattern parameter and roughness on the lubricating performance of dynamic load rough journal bearing are investigated. Based on the method mentioned above, the lubricating properties of the first main bearing of 4105 diesel engine are analyzed. The calculated results show that the first main bearing is in full hydrodynamic lubrication regime and the power loss can be reduced by decreasing the surface roughness of bearing.

Key words: Average flow model, Dynamic load journal bearing, Hydrodynamic lubrication, Surface roughness

CLC Number:

TH113

Wang Xiaoli;Wen Shizhu;Gui Changlin. LUBRICATING ANALYSIS FOR DYNAMIC LOAD JOURNAL BEARING CONSIDERING SURFACE ROUGHNESS EFFECTS[J]. , 2000, 36(1): 27-31.

[1]	LIU Xin, ZHANG Jun, XU Binbin, LIU Hongguang, ZHAO Wanhua. Controlling Strategy of Preheating Temperature Field in Laser-assisted Machining Process [J]. Journal of Mechanical Engineering, 2024, 60(9): 218-228.
[2]	ZHAO Erhui, SHAO Bo, QIAO Miaojie, QUAN Long, WANG Chengwen. Study on the Elastohydrodynamic Lubrication Characteristics of the Vane-stator Pair in High Pressure Vane Pump [J]. Journal of Mechanical Engineering, 2024, 60(8): 308-319.
[3]	ZHU Shaoyu, ZHANG Xiangjun, SUN Jun, WANG Dagang. Average Flow Model for Micropolar Fluid Lubrication of Rough Surface Bearings [J]. Journal of Mechanical Engineering, 2024, 60(7): 203-211.
[4]	FANG Congfu, LI Hongyang, SHEN Jianyun, WU Xian. Study on Intelligent Prediction of Surface Roughness Based on Integration of Abrasive Characteristics and Process Parameters [J]. Journal of Mechanical Engineering, 2024, 60(7): 224-235.
[5]	HE Chunlei, WANG Shuqi, LI Dongyang, GENG Kun, CHEN Guang, REN Chengzu. Research Progress on the Influence of Crystalline Grain in Ultra-precision Cutting of Polycrystalline Material [J]. Journal of Mechanical Engineering, 2024, 60(3): 373-392.
[6]	WEN Xuelong, ZHAO Zhenghao, GONG Yadong, LI Junpeng. Experimental Study on Influencing Factors of Surface Quality in Milling of FeCoNiCrAl_x High Entropy Alloy [J]. Journal of Mechanical Engineering, 2024, 60(17): 367-378.
[7]	ZHANG Yuan, XU Nianwei, BAO Yan, DONG Zhigang, HAN Song, GUO Dongming, KANG Renke. Surface Topography and Roughness Prediction of Axial Ultrasonic Assisted Facing Grinding Metal [J]. Journal of Mechanical Engineering, 2023, 59(5): 307-316.
[8]	ZHAO Jiajia, SONG Xianchun, JIANG Hongkui, LIN Mingxing, SONG Liwei. Modeling and Analysis of Friction Torque of Ball Screw Considering the Thermal Elastohydrodynamic Lubrication [J]. Journal of Mechanical Engineering, 2023, 59(3): 176-188.
[9]	HE Chunlei, ZHANG Jianguo, WANG Shuqi, REN Chengzu. Investigation on Measurement Method of Ultra-precision Turning Surface Roughness Based on Multi-wavelength Scattering Characteristic [J]. Journal of Mechanical Engineering, 2023, 59(3): 308-317.
[10]	ZHANG Yu, KANG Renke, GAO Shang, HUANG Jinxing, ZHU Xianglong. Development and Evaluation of Soft Abrasive Grinding Wheel for Silicon Wafer in Wet Mechanical Chemical Grinding [J]. Journal of Mechanical Engineering, 2023, 59(3): 328-336.
[11]	GUO Jiang, YANG Zhe, ZHANG Pengfei, LI Linguang, YU Xuewen, PAN Bo. Prediction of Surface Roughness in Chemical Mechanical Polishing of FeCrAl [J]. Journal of Mechanical Engineering, 2023, 59(23): 310-319.
[12]	GUO Guoqiang, YANG Boyu, LI Jianhua, CHENG Qunlin, WANG Dazhong, LIN Lifang, SHEN Bin. Study on the Prediction Method of Milling Surface Roughness Based on Cutting Kinematics Analysis [J]. Journal of Mechanical Engineering, 2023, 59(13): 314-324.
[13]	HAN Lujuan, GUO Feng, LI Xinming, LI Shuyi. Effect of Interface Modification of Stearic Acid on Oil Film Lubrication [J]. Journal of Mechanical Engineering, 2022, 58(9): 182-189.
[14]	WANG Ke, ZHOU Ping, YAN Ying, ZHANG Chao, GUO Dongming. The Localization and Roughness Analysis of Pulsed Jet Electrochemical Machining on Copper Surface [J]. Journal of Mechanical Engineering, 2022, 58(7): 258-266.
[15]	TENG Hongzhao, DENG Zhaohui, Lü Lishu, GU Qianwei, LIU Tao, ZHUO Rongjin. Research of Process Condition Monitoring Based on Multi-sensor Information Fusion [J]. Journal of Mechanical Engineering, 2022, 58(6): 26-41.

LUBRICATING ANALYSIS FOR DYNAMIC LOAD JOURNAL BEARING CONSIDERING SURFACE ROUGHNESS EFFECTS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments