• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 473-481.doi: 10.3901/JME.260577

Previous Articles    

Ultrasonic-assisted Electric Discharge Wire-cutting Processing of Shape Memory Alloy Dendrite Refinement Growth Mechanism Study

WANG Yan, LI Tiancheng, CHEN Yu, WANG Chuanqi, DU Lin, MA Haojie   

  1. School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093
  • Received:2025-09-16 Revised:2025-12-24 Published:2026-11-20

Abstract: Conventional slow-feed wire EDM (WEDM-LS) often faces problems such as low processing efficiency and poor surface quality when machining NiTi shape memory alloys. The mechanical properties of the workpiece are mainly determined by the microstructure formed during the machining process, therefore, the mechanical properties of the alloy can be effectively regulated by precisely controlling the evolution of the microstructure. To solve this problem, this study introduces ultrasonic vibration into the WEDM-LS process, and combines the lattice Boltzmann method (LBM) with the phase field (PF) method to investigate the effect of ultrasonic vibration on the growth process of dendrites in the melt pool. In this paper, through the numerical model established by Matlab, firstly, the lattice Boltzmann method with coupled phase field is used to simulate the growth process of single dendrite under natural convection and ultrasonic coupling, respectively, and on this basis, the morphology and growth behavior of multiple dendrites before and after the application of ultrasound are compared. The simulation results show that ultrasonic vibration significantly changes the growth morphology of dendrites by affecting the melt flow field and solute migration. Finally, the comparison tests between conventional EDM and ultrasonic vibration-assisted EDM were carried out respectively. The results show that the microstructure of the workpieces under the condition of ultrasonic vibration-assisted EDM is obviously refined, which is in line with the simulation results, and the average grain size has been reduced by 31.98% after the EBSD test, which reveals the influence mechanism of the ultrasonic vibration on the steady state growth rate of the dendritic crystals, the morphology evolution, and the solidification process, indicating that ultrasonic vibration can effectively change the growth morphology and growth behavior of dendrites before and after the application of ultrasound. It reveals the influence mechanism of ultrasonic vibration on the steady state growth rate of dendrites, morphological evolution and solidification process of the alloy, indicating that ultrasonic vibration can effectively refine the structure of dendrites and improve the microstructure of alloy.

Key words: WEDM, microstructure, phase field method, dendrite growth, lattice Boltzmann method

CLC Number: