Effect of Laser Shock Peening on the Properties of Al-Zn-Mg Thin-walled Structures Fabricated by Wire Arc Directed Energy Deposition

doi:10.3901/JME.260075

Abstract

Abstract: To address the issues of high internal stress and porosity defects in thin-walled high-strength Al-Zn-Mg alloy components fabricated by wire arc directed energy deposition (WA-DED), this study investigates the effect and mechanism of laser shock peening (LSP) as a post-treatment process. The influence of LSP on the mechanical properties, residual stress, microstructure evolution, and porosity of as-deposited Al-Zn-Mg alloys is systematically studied. Experimental results show that LSP introduces significant residual compressive stress inside the specimens, with an affected depth of approximately 1 mm. Compared to the as-deposited condition (yield stress: 266.6 MPa±0.7 MPa, ultimate tensile strength: 406.5 MPa±2.0 MPa), the yield strength and ultimate tensile strength of the Al-Zn-Mg alloy after LSP increased by 38.1% and 16.1%, reaching 368.1 MPa±5.1 MPa and 471.9 MPa±9.5 MPa, respectively. The remarkable improvement in mechanical properties is attributed to the generation of high-density dislocations within the bulk and the formation of numerous nanograins on the LSP-affected surface. The synergistic effects of dislocation strengthening and grain refinement are responsible for the enhanced mechanical performance of the LSP-treated samples.

Key words: additive manufacturing, wire arc directed energy deposition, laser shock peening, Al-Zn-Mg alloy, mechanical properties

CLC Number:

TH164

LI Kai, JIANG Xiao, FANG Xuewei, CHEN Ruikai, WANG Hang, LI Changze, HUANG Ke, LU Bingheng. Effect of Laser Shock Peening on the Properties of Al-Zn-Mg Thin-walled Structures Fabricated by Wire Arc Directed Energy Deposition[J]. Journal of Mechanical Engineering, 2026, 62(3): 137-145.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.260075

http://www.cjmenet.com.cn/EN/Y2026/V62/I3/137

References

[1] 韩启飞，符瑞，胡锦龙，等. 电弧熔丝增材制造铝合金研究进展[J]. 材料工程，2022，50(4)：62-73. HAN Qifei，FU Rui，HU Jinlong，et al. Research progress in wire arc additive manufacturing of aluminum AL-loys[J]. Journal of Materials Engineering，2022，50(4)：62-73.
[2] GHAINI F M，SHEIKHI M，TORKAMANY M J，et al. The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy[J]. Materials Science and Engineering：A，2009，519(1-2)：167-171.
[3] 从保强，苏勇，齐铂金，等. 铝合金电弧填丝增材制造技术研究[J]. 航天制造技术，2016(3)：29-32，37. CONG Baoqiang，SU Yong，QI Bojin，et al. Wire + arc additive manufacturing for aluminum alloy deposits[J]. Aerospace Manufacturing Technology，2016(3)：29-32，37.
[4] REN X D，ZHANG Y K，YONGZHUO H F，et al. Effect of laser shock processing on the fatigue crack initiation and propagation of 7050-T7451 aluminum alloy[J]. Materials Science and Engineering：A，2011，528(6)：2899-2903.
[5] JING Y，FANG X，GENG Y，et al. Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening[J]. Materials Science and Engineering：A，2023，887：145699.
[6] LI X，FANG X，ZHANG M，et al. Gradient microstructure and prominent performance of wire-arc directed energy deposited magnesium alloy via laser shock peening[J]. International Journal of Machine Tools and Manufacture，2023，188：104029.
[7] ZHOU J，ZHOU X，LI H，et al. In-situ laser shock peening for improved surface quality and mechanical properties of laser-directed energy-deposited AlSi10Mg alloy[J]. Additive Manufacturing，2022，60：103177.
[8] SUN R，LI L，ZHU Y，et al. Microstructure，residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening[J]. Journal of Alloys and Compounds，2018，747：255-265.
[9] KARTHIK D，JIANG J，HU Y，et al. Effect of multiple laser shock peening on microstructure，crystallographic texture and pitting corrosion of aluminum-lithium alloy 2060-T8[J]. Surface and Coatings Technology，2021，421：127354.
[10] PEYRE P，FABBRO R. Laser shock processing：A review of the physics and applications[J]. Optical and Quantum Electronics，1995，27(12)：1213-1229.
[11] FABBRO R，FOURNIER J，BALLARD P，et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics，1990，68(2)：775-784.
[12] LU J Z，LUO K Y，ZHANG Y K，et al. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts[J]. Acta Materialia，2010，58(11)：3984-3994.
[13] ZHI H，ZHANG C，ANTONOV S，et al. Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel[J]. Acta Materialia，2020，195：371-382.
[14] CHUNG T F，YANG Y L，HUANG B M，et al. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy[J]. Acta Materialia，2018，149：377-387.
[15] MUZYK M，PAKIELA Z，KURZYDLOWSKI K J. Ab initio calculations of the generalized stacking fault energy in aluminium alloys[J]. Scripta Materialia，2011，64(9)：916-918.
[16] FANG X，LI K，MA M，et al. Improved properties of wire arc directed energy deposited thin-walled Al-6Mg-0.3Sc component via laser shock peening[J]. Virtual and Physical Prototyping，2024，19(1)：e2370956.
[17] SAKAI T，BELYAKOV A，KAIBYSHEV R，et al. Dynamic and post-dynamic recrystallization under hot，cold and severe plastic deformation conditions[J]. Progress in Materials Science，2014，60：130-207.