Reliability Modeling and Estimation of Electro-mechanical Systems under Alternating Loads Based on Current Signal

doi:10.3901/JME.2024.22.437

Abstract

Abstract: Reliability estimation and failure prediction are important for the security and stability of electromechanical systems. Using motor current signature analysis to model and estimate the reliability of mechanical components of electromechanical systems can minimize the damage to the system and save cost. However, most of existing studies focus on the systems under constant load or single operating condition, while some systems with multi-stage cyclic tasks and varying loads, such as industrial robots, suffer from distinguishing loads at different stages of specific tasks, (For example, the grinding task includes taking, grinding, refueling and other stages), resulting in the diversity of amplitude of the motor current in a single task, and it appears in cycles with all the tasks during service. As a result, the traditional reliability estimation method with a single failure threshold is no longer applicable. For electromechanical systems under alternating load conditions, a reliability modeling and evaluation method based on current signals is proposed. Considering the differences in current amplitude caused by varying loads in different task stages, a unified performance degradation model for each task stage is constructed, and an analytical expression of reliability function is derived by combining the failure thresholds corresponding to different stages. An improved two-step likelihood method is proposed for parameter estimation of single or multiple samples. The proposed method is verified by the experiment of alternating load of harmonic reducer of industrial robot. The results show that the reliability estimation results based on the proposed model are more accurate and reasonable, and the degradation model with a single failure threshold may overestimate or underestimate the reliability.

Key words: reliability, degradation model, electromechanical, industrial robots, MCSA

CLC Number:

TG156

WANG Jia, JIANG Lulu, TAO Yourui, HAN Xu. Reliability Modeling and Estimation of Electro-mechanical Systems under Alternating Loads Based on Current Signal[J]. Journal of Mechanical Engineering, 2024, 60(22): 437-446.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.22.437

http://www.cjmenet.com.cn/EN/Y2024/V60/I22/437

References

[1] LI N，XU P，LEI Y，et al. A self-data-driven method for remaining useful life prediction of wind turbines considering continuously varying speeds[J]. Mechanical Systems and Signal Processing，2022，165：108315.
[2] WANG Z，ZHOU J，DU W，et al. Bearing fault diagnosis method based on adaptive maximum cyclostationarity blind deconvolution[J]. Mechanical Systems and Signal Processing，2022，162：108018.
[3] FENG Z，CHEN X，ZUO M J. Induction motor stator current AM-FM model and demodulation analysis for planetary gearbox fault diagnosis[J]. IEEE Transactions on Industrial Informatics，2018，15(4)：2386-2394.
[4] GAO A，FENG Z，LIANG M. Permanent magnet synchronous generator stator current AM-FM model and joint signature analysis for planetary gearbox fault diagnosis[J]. Mechanical Systems and Signal Processing，2021，149：107331.
[5] CHEN X，FENG Z. Induction motor stator current analysis for planetary gearbox fault diagnosis under time-varying speed conditions[J]. Mechanical Systems and Signal Processing，2020，140：106691.
[6] LI F，PANG X，YANG Z. Motor current signal analysis using deep neural networks for planetary gear fault diagnosis[J]. Measurement，2019，145：45-54.
[7] YANG Q，LIU T，WU X，et al. A planetary gear reducer backlash identification based on servo motor current signal and optimized fisher discriminant analysis[J]. ISA Transactions，2021，112：350-362.
[8] CHENG F，QU L，QIAO W. Fault prognosis and remaining useful life prediction of wind turbine gearboxes using current signal analysis[J]. IEEE Transactions on Sustainable Energy，2017，9(1)：157-167.
[9] 郭建英，孙永全，于春雨，等. 复杂机电系统可靠性预测的若干理论与方法[J]. 机械工程学报，2014，50(14)：1-13. GUO Jianying，SUN Yongquan，YU Chunyu，et al. Some theory and method for complex electromechanical system reliability prediction[J]. Journal of Mechanical Engineering，2014，50(14)：1-13.
[10] 谢里阳. 机械可靠性理论、方法及模型中若干问题评述[J]. 机械工程学报，2014，50(14)：27-35. XIE Liyang. Issues and commentary on mechanical reliability theories，methods and models[J]. Journal of Mechanical Engineering，2014，50(14)：27-35.
[11] WANG J，HAN X，ZHANG Y，et al. Modeling the varying effects of shocks for a multi-stage degradation process[J]. Reliability Engineering & System Safety，2021，215：107925.
[12] SUN F，LI H，CHENG Y，et al. Reliability analysis for a system experiencing dependent degradation processes and random shocks based on a nonlinear Wiener process model[J]. Reliability Engineering & System Safety，2021，215：107906.
[13] ZHAO X，FAN Y，QIU Q，et al. Multi-criteria mission abort policy for systems subject to two-stage degradation process[J]. European Journal of Operational Research，2021，295(1)：233-245.
[14] WANG H，LIAO H，MA X. Stochastic multi-phase modeling and health assessment for systems based on degradation branching processes[J]. Reliability Engineering & System Safety，2022，222：108412.
[15] XU Z，MO Y，LIU Y，et al. Reliability assessment of multi-state phased-mission systems by fusing observation data from multiple phases of operation[J]. Mechanical Systems and Signal Processing，2019，118：603-622.
[16] WU X，YU H，BALAKRISHNAN N. Modular model and algebraic phase algorithm for reliability modelling and evaluation of phased-mission systems with conflicting phase redundancy[J]. Reliability Engineering & System Safety，2022，227：108735.
[17] WANG C，XING L，LEVITIN G. Probabilistic common cause failures in phased-mission systems[J]. Reliability Engineering & System Safety，2015，144：53-60.
[18] WANG C，XING L，TANG B. Multivalued decision diagram-based common cause failure analysis in phased-mission systems[J]. Computers & Industrial Engineering，2020，146：106622.
[19] MEEKER W Q，ESCOBAR L A，LU C J. Accelerated degradation tests：Modeling and analysis[J]. Technometrics，1998，40(2)：89-99.
[20] ZHANG Z，SI X，HU C，et al. Degradation data analysis and remaining useful life estimation：A review on Wiener-process-based methods[J]. European Journal of Operational Research，2018，271(3)：775-796.
[21] KANG J，LU Y，ZHAO B，et al. Remaining useful life prediction of cylinder liner based on nonlinear degradation model[J]. Eksploatacja i Niezawodność，2022，24(1)：62-69.
[22] 唐圣金，郭晓松，周召发，等. 步进应力加速退化试验的建模与剩余寿命估计[J]. 机械工程学报，2014，50(16)：33-40. TANG Shengjin，GUO Xiaosong，ZHOU Zhaofa，et al. Step stress accelerated degradation process modeling and remaining useful life estimation[J]. Journal of Mechanical Engineering，2014，50(16)：33-40.
[23] TSENG S T，PENG C Y. Stochastic diffusion modeling of degradation data[J]. Journal of Data Science，2007，5(3)：315-333.
[24] LIAO C M，TSENG S T. Optimal design for step-stress accelerated degradation tests[J]. IEEE Transactions on Reliability，2006，55(1)：59-66.
[25] PENG C Y，TSENG S T. Mis-specification analysis of linear degradation models[J]. IEEE Transactions on Reliability，2009，58(3)：444-455.
[26] 王巧，杜雪松，宋朝省，等. 谐波减速器加速寿命试验方法研究[J]. 中国机械工程，2022，33(19)：2317. WANG Qiao，DU Xuesong，SONG Chaosheng，et al. Research on accelerated life test method of harmonic speed reducer[J]. China Mechanical Engineering，2022，33(19)：2317.
[27] TONG Q B，JIAO C Q，NING T，et al. Harmonic gear reducer transmission error analysis and detection[J]. Advanced Materials Research，2013，711：375-380.
[28] YAN T，LEI Y，LI N，et al. Degradation modeling and remaining useful life prediction for dependent competing failure processes[J]. Reliability Engineering & System Safety，2021，212：107638.
[29] YAN T，LEI Y，LI N，et al. Online joint replacement-order optimization driven by a nonlinear ensemble remaining useful life prediction method[J]. Mechanical Systems and Signal Processing，2022，173：109053.
[30] BLODT M，GRANJON P，RAISON B，et al. Models for bearing damage detection in induction motors using stator current monitoring[J]. IEEE Transactions on Industrial Electronics，2008，55(4)：1813-1822.