Research on Accurate Friction Characteristics Test Method of Composite Servo Hydraulic Cylinder

doi:10.3901/JME.2024.16.338

Abstract

Abstract: Composite servo hydraulic cylinder is an innovative solution of hydraulic cylinder weight reduction. Friction characteristics is one of the core factors, which affects the control accuracy and dynamic performance of electro-hydraulic servo system. Traditional hydraulic cylinder friction test adopts imprecise starting pressure measurement method. A wide-speed range and high efficiency precision friction testing method is proposed for a new composite hydraulic cylinder. In this friction test method, the speed of the cylinder under test is driven and controlled by a hydraulic test rig. A friction-velocity feature points marking method and a step size adaption control method are proposed to improve the accuracy of friction characteristic test. The friction-speed relationship curve of the hydraulic cylinder in a wide speed range is obtained. The friction characteristic parameters of the hydraulic cylinder under test are identified by fitting the friction-velocity curve to the Stribeck equation. This friction test method has been applied to a test bench, and the friction characteristics of a carbon fiber hydraulic cylinder has been tested to verify the effectiveness of the test method.

Key words: hydrostatic transmission, servo hydraulic cylinder, friction characteristics, composite materials, friction test

CLC Number:

TB332

JIANG Linlin, YU Tian, LI Yao, JIAO Zongxia, SHANG Yaoxing. Research on Accurate Friction Characteristics Test Method of Composite Servo Hydraulic Cylinder[J]. Journal of Mechanical Engineering, 2024, 60(16): 338-347.

References

[1] 张婷婷. 国外液压研发动态-据中国液压气动密封件工业协会专家委员会特别顾问张海平专家报告整理[J]. 液压气动与密封,2016,36(3):92-96. ZHANG Tingting. Foreign hydraulic research and development trends-According to China Hydraulic Pneumatic Seal Industry Association Expert Committee special consultant Zhang Haiping expert report[J]. Hydraulics Pneumatics and Seals,2016,36(3):92-96.
[2] PAVEL R,LEONID R,IVAN S. Analysis of hydraulic units manufactured by powder bed fusion[C]//2018 Global Fluid Power Society PhD Symposium (GFPS),Samara,Russia:IEEE,2018:1-4.
[3] WILHELM D,RUDOLF N. Compact hydraulic power unit[Z]. EP,2000.
[4] 尚耀星,李瑶,于天,等. 轻量化复合材料液压缸现状及挑战[J]. 机械工程学报,2021,57(24):13-38. SHANG Yaoxing,LI Yao,YU Tian,et al. Present situation and challenge of lightweight composite hydraulic cylinder[J]. Chinese Journal of Mechanical Engineering,2021,57(24):13-38.
[5] 徐兵,纵怀志,张军辉,等. 碳纤维复合材料液压缸研究现状与发展趋势[J]. 复合材料学报,2022,39(2):446-459. XU Bing,ZONG Huaizhi,ZHANG Junhui,et al. Research status and development trend of carbon fiber composite hydraulic cylinder[J]. Acta Materiae Compositae Sinica,2022,39(2):446-459.
[6] PRAHLADA K. Design,analysis,fabrication and testing of CFRP with CNF composite cylinder for space applications[J]. International Journal of Composite Materials,2015,5(5):102-128.
[7] 谢逸,宋鹏涛,王永宁,等. 碳纤维材料的性能及应用[J]. 科技创新与应用,2013(18):51-52. XIE Yi,SONG Pengtao,WANG Yongning,et al. Properties and applications of carbon fiber materials[J]. Technology Innovation and Application,2013(18):51-52.
[8] 王特,刘勇琼,廖英强. 高性能碳纤维在复合材料压力气瓶方面的应用研究[J]. 炭素,2015(4):23-27. WANG Te,LIU Yongqiong,LIAO Yingqiang. Application of high performance carbon fiber in composite pressure cylinders[J]. Carbon Techniques,2015(4):23-27.
[9] 白文怡,廖英强,刘勇琼,等. 碳纤维复合材料缠绕气瓶优化研究进展[J]. 炭素,2020(1):36-41. BAI Wenyi,LIAO Yingqiang,LIU Yongqiong,et al. Progress in optimization of carbon fiber composite wound gas cylinders[J]. Carbon Techniques,2020(1):36-41.
[10] 嵇醒,戴瑛,顾星若. 碳纤维缠绕铝内胆气瓶的有限元分析与自紧设计[J]. 力学季刊,2003,24(3):358-389. JI Xing,DAI Ying,GU Xingruo. Finite element analysis and self-tightening design of carbon fiber wound aluminum cylinder[J]. Chinese Quarterly of Mechanics,2003, 24(3):358-389.
[11] SOLAZZI L. Design and experimental tests on hydraulic actuator made of composite material[J]. Composite Structures,2019,232:111544.
[12] ELASSWAD M,TAYBA A,ABDELLATIF A,et al. Development of lightweight hydraulic cylinder for humanoid robots applications[J]. Proceedings of the Institution of Mechanical Engineers,Part C. Journal of Mechanical Engineering Science,2018,232(18):3351-3364.
[13] ELASSWAD M,SAMER A,KHALED K. Experimental estimation of friction and friction coefficient of a lightweight hydraulic cylinder intended for robotics applications[J]. International Journal of Applied Mechanics,2018,10(8):1850080.
[14] 付曙光,陈奎生,湛从昌,等. 伺服液压缸静动态性能测试系统研究[J]. 中国工程机械学报,2010,8(1):91-95. FU Shuguang,CHEN Kuisheng,ZHAN Congchang,et al. Research on static and dynamic performance test system of servo hydraulic cylinder[J]. Chinese Journal of Construction Machinery,2010,8(1):91-95.
[15] 宋自成,曾良才. 伺服液压缸试验台研究[J]. 液压与气动,2008(8):10-11. SONG Zicheng,ZENG Liangcai. Research on servo hydraulic cylinder test bed[J]. Chinese Hydraulics & Pneumatics,2008(8):10-11.
[16] 经克,杨晓玉,杨尚平. 液压缸附加摩擦力的理论分析和实验测定[J]. 组合机床与自动化加工技术,2000(6):28-30. JING Ke,YANG Xiaoyu,YANG Shangping. Theoretical analysis and experimental determination of additional friction force in hydraulic cylinder[J]. Combined machine tool and automatic machining technology,2000(6):28-30.
[17] CRISTESCU C,DUMITRESCU C,RADOI R,et al. Experimental research for measuring friction forces from piston sealing at the hydraulic cylinders[J]. Tribology in Industry,2014,36(4):465.
[18] 陈剑锋. 基于LuGre摩擦模型的气缸摩擦力实验研究[D]. 杭州:浙江大学,2011. CHEN Jianfeng. Experimental study of cylinder friction force based on LuGre friction model[D]. Hangzhou:Zhejiang University,2011.
[19] 陈新元,蔡钦,湛从昌,等. 液压伺服液压缸静动态性能测试系统开发[J]. 液压与气动,2008(12):77-79. CHEN Xinyuan,CAI Qin,ZHAN Congchang,et al. Development of static and dynamic performance test system for hydraulic servo hydraulic cylinder[J]. Chinese Hydraulics & Pneumatics,2008(12):77-79.
[20] 王林鸿,杜润生,吴波,等. 液压缸低速运动的动态分析[J]. 中国机械工程,2006,17(20):2098-2101. WANG Linhong,DU Runsheng,WU Bo,et al. Dynamic analysis of low speed motion of hydraulic cylinder[J]. China Mechanical Engineering,2006,17(20):2098-2101.
[21] 王鹏. 基于LuGre模型的液压油缸摩擦力试验研究[D]. 秦皇岛:燕山大学,2018. WANG Peng. Experimental study on friction force of hydraulic cylinder based on LuGre model[D]. Qinhuangdao:Yanshan University,2018.
[22] 尚耀星. 电液负载模拟器的极限性能研究[D]. 北京:北京航空航天大学,2009. SHANG Yaoxing. Study on the ultimate performance of electro-hydraulic load simulator[D]. Beijing:Beihang University,2009.
[23] 黄进. 含摩擦环节伺服系统的分析及控制补偿研究[D].西安:西安电子科技大学,1999. HUANG Jin. Analysis and control compensation of servo system with friction link[D]. Xi'an:Xidian University,1999.
[24] KARNOPP D. Computer simulation of stick-slip friction in mechanical dynamic systems[J]. Journal of Dynamic Systems Measurement and Control,1985,107(1):100-103.
[25] ARMSTRONG-HELOUVRY B. Frictional lag and stick- slip[C]//IEEE International Conference on Robotics & Automation, Nice,France:IEEE,1992:1448-1453.
[26] LIU Jinkun,LIU Qiang. Zero phase error real time control for flight simulator servo system[J]. Chinese Journal of Mechanical Engineering,2004,17(1):4.
[27] ARMSTRONG-HELOUVRY B. Stick-slip arising from Stribeck friction[C]//Proceedings,IEEE International Conference on Robotics and Automation,Cincinnati,OH,USA:IEEE,1990:1377-1382.
[28] LI Yao,YU Tian,SHANG Yaoxing,et al. Design and experiment on light weight hydraulic cylinder made of carbon fiber reinforced polymer[J]. Composite Structures,2022(291):115564.