Journal of Mechanical Engineering ›› 2023, Vol. 59 ›› Issue (18): 144-153.doi: 10.3901/JME.2023.18.144
Previous Articles Next Articles
WU Daiqiong1,2,3, SU Qiong1,3, CHEN Lei2, WU Yanping2, WANG Yanbin1,3, SUN Chufeng1,3, CHEN Jianmin2
Received:2022-09-28
Revised:2023-06-16
Online:2023-09-20
Published:2023-12-07
CLC Number:
WU Daiqiong, SU Qiong, CHEN Lei, WU Yanping, WANG Yanbin, SUN Chufeng, CHEN Jianmin. Progress on Application and Oriented Arrangenment of Graphene in Composites[J]. Journal of Mechanical Engineering, 2023, 59(18): 144-153.
| [1] WANG Ruoqin,ZHOU Jinping,PAN Weichao,et al. Research progress of new graphene materials[J]. New Chemical Materials,2020,48(S1):11-13. [2] HU K,KULKARNI D D,CHOI I,et al. Graphene-polymer nanocomposites for structural and functional applications[J]. Progress in Polymer Science,2014,39(11):1934-1972. [3] GEIM A K,NOVOSELOV K S. The rise of graphene[J]. Nature Materials,2007,6:183-191. [4] 蔺娜,林志燃,陈瀚宁,等. 激光诱导制造石墨烯研究现状与发展趋势[J]. 机械工程学报,2022,58(3):235-250. Lin Na,Lin Zhiran,Chen Hanning,et al. Research status and development trend of laser-induced graphene fabrication[J]. Journal of Mechanical Engineering,2022,58(3):235-250. [5] 刘茜. 氧化石墨烯/酚醛环氧复合材料的界面改性与热性能研究[D]. 西安:西安理工大学,2018. LIU Xi. Interfacial modification and thermal properties of graphene oxide/phenoli epoxy composites[D]. Xi'an:Xi'an University of technology,2018. [6] GEIM A K. Graphene:Status and prospects[J]. Science,2009,324:1530-1534. [7] XIE X L,MAI Y W,ZHOU X P. Dispersion and alignment of carbon nanotubes in polymer matrix:A review[J]. Polymeric Materials Science & Engineering,2005,49(4):89-112. [8] 王雅珍,庆迎博,孟爽,等. 石墨烯制备及应用研究进展[J]. 化学世界,2019,60(7):385-394. WANG Yazhen,QING Yingbo,MENG Shuang,et al. Progress in preparation and application of graphene[J]. Chemical World,2019,60(7):385-394. [9] 丁智平,黄达勇,荣继刚,等. 注塑成型短玻纤增强复合材料各向异性弹性常数预测方法[J]. 机械工程学报,2017,53(24):126-134. DING Zhiping,HUANG Dayong,RONG Jigang,et al. Prediction method for anisotropic elastic constants of injection molded short glass fiber reinforced composites[J]. Journal of Mechanical Engineering,2017,53(24):126-134. [10] RAFIEE M A,RAFIEE J,WANG Z,et al. Enhanced mechanical properties of nanocomposites at low graphene content[J]. Acs Nano,2009,3(12):3884-3890. [11] XING W,LI H,HUANG G,et al. Graphene oxide induced crosslinking and reinforcement of elastomers[J]. Composites Science and Technology,2017,144:223-229. [12] POUR Z S,GHAEMNY M. Polymer grafted graphene oxide:For improved dispersion in epoxy resin and enhancement of mechanical properties of nanocomposite[J]. Composites Science and Technology,2016,136:145-157. [13] PUTZ K W,COMPTON R C,PALMERI R J,et al. High-nanofiller-content graphene oxide-polymer nanocomposites via vacuum-assisted self-assembly[J]. Advanced Materials for Optics and Electronics,2010,20(19):3322-3329. [14] BALANDIN A A. Thermal properties of graphene and nanostructured carbon materials[J]. Nature Materials,2011,1(10):569-581. [15] YANG H,ZHAO H,WANG T,et al. A multi-layered SiC coating to protect graphite spheres from high temperature oxidation in static air[J]. Corrosion Science,2021,183:109325. [16] ZHAO H,DING J,LIU P,et al. Boron nitride-epoxy inverse "nacre-like" nanocomposite coatings with superior anticorrosion performance[J]. Corrosion Science,2021,183:109333. [17] LUO X,ZHONG J,ZHOU Q,et al. Cationic reduced graphene oxide as self-aligned nanofiller in the epoxy nanocomposite coating with excellent anticorrosive performance and its high antibacterial activity[J]. ACS Applied Materials & Interfaces,2018,10(21):18400-18415. [18] ZHANG Y,ZOU Q,HSU H S,et al. Morphology effect of vertical graphene on the high performance of supercapacitor electrode[J]. ACS Appl. Mater. Interfaces,2016,8(11):7363-7369. [19] ZHENG W,ZHAO X,FU W. Review of vertical graphene and its applications[J]. ACS Applied Materials And Interfaces,2021,13(8):9561-9579. [20] XIAO F X,PAG L M,XU Y J,et al. Layer-by-layer assembly of versatile nanoarchitectures with diverse dimensionality:A new perspective for rational construction of multilayer assemblies[J]. Chemical Society Reviews,2016,45(11):3088-3121. [21] 吕青,颜红侠,刘超. 聚合物/定向石墨烯复合材料研究进展[J]. 工程塑料应,2016,44(2):140-144. LÜ Qing,YAN Hongxia,LIU Chao. Research progress of polymer/oriented graphene composites[J]. Engineering Plastics,2016,44(2):140-144. [22] HU C,LI J,LIU D,et al. Effects of the coagulation temperature on the properties of wet-spun poly(vinyl alcohol)-graphene oxide fibers[J]. Journal of Applied Polymer Science,2017,134(43):45463-45470. [23] GAO Y,PICOT O T,WEI T,et al. Multilayer coextrusion of graphene polymer nanocomposites with enhanced structural organization and properties[J]. Journal of Applied Polymer Science,2018,135(13):46041-46051. [24] LADANI R B,WU S,KINLOCH A J,et al. Multifunctional properties of epoxy nanocomposites reinforced by aligned nanoscale carbon[J]. Materials & Design,2016,94:554-564. [25] ZHAO X,ZHANG Q,HAO Y,et al. Alternate multilayer films of poly(vinyl alcohol) and exfoliated graphene oxide fabricated via a facial layer-by-layer assembly[J]. Macromolecules,2010,43(22):9411-9416. [26] CHEN W,LIU P,MIN L,et al. Non-covalently functionalized graphene oxide-based coating to enhance thermal stability and flame retardancy of PVA film[J]. Nano-Micro Letters,2018,10(3):39-51. [27] RAMANATHAN M,KILBEY I,JI Q,et al. Materials self-assembly and fabrication in confined spaces[J]. Journal of Materials Chemistry,2012,22(21):10389-10405. [28] 杨士萱,矫维成,楚振明,等. 石墨烯定向排列增强聚合物基复合材料研究进[J]. 玻璃钢/复合材料,2019(3):92-100. YANG Shixuan,JIAO Weicheng,CHU Zhenming,et al. Research progress of polymer matrix composites reinforced by oriented graphene[J]. Frp/Composites,2019(3):92-100. [29] XU Y,HONG W,HUA B,et al. Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure[J]. Carbon,2009,47(15):3538-3543. [30] CAO R,CHEN Z,WU Y,et al. Precisely controlled growth of poly(ethyl acrylate) chains on graphene oxide and the formation of layered structure with improved mechanical properties[J]. Composites Part A Applied Science & Manufacturing,2017,93:100-106. [31] YOUSEFI N,GUDARZI M M,ZHENG Q,et al. Ultralarge-size reduced graphene oxide/polyurethane nanocomposites:Mechanical properties and moisture permeability[J]. Composites Part A:Applied Science & Manufacturing,2013,49(6):42-50. [32] YOUSEFI N,LIN X,ZHENG Q,et al. Simultaneous in situ reduction,self-alignment and covalent bonding in graphene oxide/epoxy composites[J]. Carbon,2013,59(7):406-417. [33] 韩依廷. 定向排列石墨烯/聚合物复合材料研究进展[J]. 石化,2017,24(12):207-208. HAN Yiting. Research progress of oriented graphene/polymer composites[J]. Petrochemicals,2017,24(12):207-208. [34] 邱峰. 石墨烯功能化及其在聚丙烯基体中取向分布研究[D]. 重庆:西南大学,2015. QIU Feng. Functionalization of graphene and its orientation distribution in polypropylene matrix[D]. Chongqing:Southwest University,2015. [35] SUN Haiyan,LIU Yingjun,XU Zhen,et al. Experimental guidance to graphene macroscopic wet-spun fibers,continuous papers,and ultralightweight aerogels[J]. Chemistry of Materials,2016,29(1):319-330. [36] LIANG J,XU Y,DONG S,et al. Flexible,magnetic,and electrically conductive graphene/Fe3O4 paper and its application for magnetic-controlled switches[J]. Journal of Physical Chemistry C,2010,114:17465-17471. [37] CORREA M A,GRZELCZAK M,DIAZ R,et al. Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles[J]. Journal of Physical Chemistry B,2005,109(41):19060-19063. [38] LIU Yuewen,GUAN Mengxue,Deng Shunliu,et al. Facile and straightforward synthesis of superparamagnetic reduced graphene oxide-Fe3O4 hybrid composite by a solvothermal reaction[J]. Nanotechnology,2013,24(2):25604. [39] HE F,FAN J,DONG M,et al. The attachment of Fe3O4nanoparticles to graphene oxide by covalent bonding[J]. Carbon,2010,48(11):3139-3144. [40] ROBERT J,FULLERTON P,COLE D,et al. Graphene non-covalently tethered with magnetic nanoparticles[J]. Carbon,2014,72:192-199. [41] ROURKE J P,PANDEY P A,MOORE J J,et al. The real graphene oxide revealed:Stripping the oxidative debris from the graphene-like sheets[J]. Angew. Chem. Int. Ed. Engl.,2012,50(14):3173-3177. [42] STANKOVICH S,PINER R D,CHEN X,et al. Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate)[J]. Journal of Materials Chemistry,2016,16(2):155-158. [43] LIU Z,JIAO W,YAN M,et al. A novel method for imitating nacre by utilizing magnetic graphene oxide and its magnetic field alignment in polymer nanocomposites[J]. Materials Research Express,2018,5(2):1-11. [44] RENTERIA J,LEGEDZA S,SALGADO R,et al. Magnetically-functionalized self-aligning graphene fillers for high-efficiency thermal management applications[J]. Materials & Design,2015,88(25):214-221. [45] DING R,CHEN S,ZHOU N,et al. The diffusion-dynamical and electrochemical effect mechanism of oriented magnetic graphene on zinc-rich coatings and the electrodynamics and quantum mechanics mechanism of electron conduction in graphene zinc-rich coatings[J]. Journal of Alloys and Compounds,2019,784:756-768. [46] DING R,ZHENG Z,YU H,et al. Study of water permeation dynamics and anti-corrosion mechanism of graphene/zinc coatings[J]. Journal of Alloys and Compounds,2018,748:481-495. [47] DING R,WANG X,JIANG J,et al. Study on evolution of coating state and role of graphene in graphene-modified low-zinc waterborne epoxy anticorrosion coating by electrochemical impedance spectroscopy[J]. Journal of Materials Engineering and Performance,2017,26(7):3319-3335. [48] YAN H,WANG R,LI Y,et al. Thermal conductivity of magnetically aligned graphene-polymer composites with Fe3O4-decorated graphene nanosheets[J]. Journal of Electronic Materials,2015,44(2):658-666. [49] TANG Y,YAN H,LONG W,et al. Enhanced thermal conductivity in polymer composites with aligned graphene nanosheets[J]. Journal of Materials Science,2014,49(15):5256-5264. [50] 郝毅杰,胡晓东,黄娟,等. 磁性石墨烯/环氧树脂复合材料的制备及性能[J]. 热固性树脂,2020,35(5):41-45. HAO Yijie,HU Xiaodong,HUANG Juan,et al. Preparation and properties of magnetic graphene/epoxy resin composites[J]. Thermosetting Resin,2020,35(5):41-45. [51] CHATTERJEE S,NAFEZAREFI F,TAI N H,et al. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites[J]. Carbon,2012,50(15):5380-5386. [52] ZHAO W,WANG H,TANG H,et al. Facile preparation of epoxy-based composite with oriented graphite nanosheets[J]. Polymer,2006,47(26):8401-8405. [53] LIN F,YANG G,NIU C,et al. Planar alignment of graphene sheets by a rotating magnetic field for full exploitation of graphene as a 2D material[J]. Advanced Functional Materials,2018,28(46):1805255.1-1805255.7. [54] KIM G H,SHKEL Y M. Polymeric composites tailored by electric field[J]. Journal of Materials Research,2004,19(4):1164-1174. [55] PANG H,LU Q,GAO F. Graphene oxide induced growth of one-dimensional fusiform zirconia nanostructures for highly selective capture of phosphopeptides[J]. Chemical Communications,2011,47(42):11772-11774. [56] VENUGOPAL G,KRAUSE S,WNEK G E. Modification of polymer blend morphology using electric fields[J]. Journal of Polymer Science Part C Polymer Letters,1989,27(12):497-501. [57] CHEN Y,SPRECHER A F,CONRAD H. Electrostatic particle-particle interactions in electrorheological fluids[J]. Journal of Applied Physics,1991,70(11):6796-6803. [58] CHEN T Y,BRISCOE B J,LUCKHAM P F. Microstructural studies of electro-rheological fluids under shear[J]. Journal of the Chemical Society Faraday Transactions,1995,91(12):1787-1794. [59] HILL J C,STEEN T. Response times of electrorheological fluids[J]. Journal of Applied Physics,1991,70(3):1207-1211. [60] BONNECAZE R T,BRADY J F. Dynamic simulation of an electrorheological fluid[J] The Journal of Chemical Physics,1992,96(3):2183-2202. [61] MELROSE J R,HEYES D M. Simulations of electrorheological and particle mixture suspensions:Agglomerate and layer structures[J]. Journal of Chemical Physics,1993,98(7):5873-5886. [62] CLERCXl H,BOSSIS G. Many-body electrostatic interactions in electrorheological fluids[J]. Physical Review E,1993,48(4):2721-2738. [63] FU L,RESCA L. Electrical response of heterogeneous systems of nonlinear inclusions[J]. Physical Review B Condensed Matter,1995,47(24):16194-16204. [64] FU L,RESCA L. Exact theory of the electrostatic interaction in electrorheological fluids and the effects of particle structure[J]. Solid State Communications,1996,99(2):83-87. [65] TANAKA K,FUJIOKA Y,KUBONO A,et al. Electrically developed morphology of carbon nanoparticles in suspensions monitored by in situ optical observations under sinusoidal electric field[J]. Colloid and Polymer Science,2006,284(5):562-567. [66] BORDEL D,PUTAUX J,HEUX L. Orientation of native cellulose in an electric field[J]. Langmuir the ACS Journal of Surfaces & Colloids,2006,22(11):4899-4901. [67] HU Z,FISCHBEIN M,QUERNER C,et al. Electric-field-driven accumulation and alignment of CdSe and CdTe nanorods in nanoscale devices[J]. Nano Letters,2006,6(11):2585-2591. [68] CHEN X,SAITO T,YAMADA H,et al. Aligning single-wall carbon nanotubes with an alternating-current electric field[J]. Applied Physics Letters,2001,78(23):3714-3716. [69] KUMAR H,KIM H,LEE S,et al. Influence of electric field type on the assembly of single walled carbon nanotubes[J]. Chemical Physics Letters,2004,383(34):235-239. [70] KAMAT P,THOMAS K,BARAZZOUK S,et al. Self-assembled linear bundles of single wall carbon nanotubes and their alignment and deposition as a film in a dc field[J]. Journal of the American Chemical Society,2004,126(34):10757-10762. [71] SANDLER J,WINDLE A,SCHWARZ M,et al. Electric field-induced aligned multi-wall carbon nanotube networks in epoxy composites[J]. Polymer,2005,46(3),877-901. [72] CHEN Z,YANG Y,WU Z,et al. Electric-field-enhanced assembly of single-walled carbon nanotubes on a solid surface[J]. Journal of Physical Chemistry B,2005,109(12):5473-5477. [73] ZHANG H,ZHAO W,ZHANG W,et al. Preparation of polymer/oriented graphite nanosheet composite by electric field-inducement[J]. Composites Science and Technology,2008,68(1):238-243. [74] GUO Y,CHEN Y,WANG E,et al. Roll-to-roll continuous manufacturing multifunctional nanocomposites by electric-field-assisted "Z" direction alignment of graphite flakes in poly(dimethylsiloxane)[J]. ACS Applied Materials & Interfaces,2017,9(1):919-929. [75] BHASIN M,WU S,LADANI R,et al. Increasing the fatigue resistance of epoxy nanocomposites by aligning graphene nanoplatelets[J]. International Journal of Fatigue,2018,113:88-97. [76] KHORAMISHAD H,VAFA S. Effect of aligning graphene oxide nanoplatelets using direct current electric field on fracture behaviour of adhesives[J]. Fatigue & Fracture of Engineering Materials & Structures,2018,41(12):2514-2529. [77] 董若宇,曹鹏,曹桂兴,等. 直流电场下水中石墨烯定向行为研究[J]. 物理学报,2017,66(1):218-225. DONG Ruoyu,CAO Peng,CAO Guixing,et al. Study on orientation behavior of graphene in water under DC electric field[J]. Acta Physics Sinica,2017,66(1):218-225. [78] PRASSE T,FLANDIN L,SCHULTE K,et al. In situ observation of electric field induced agglomeration of carbon black in epoxy resin[J]. Applied Physics Letters,1988,72(22):2903-2905. [79] SCHWARZ M,BAUHOFER W,SCHULTE K. Alternating electric field induced agglomeration of carbon black filled resins[J]. Polymer,2002,43(10):3079-3082. [80] WU S,LADANI R B,ZANG J,et al. Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites[J]. Carbon,2015,94:607-618. [81] Zhu X,Yan Q,Cheng L,et al. Self-alignment of cationic graphene oxide nanosheets for anticorrosive reinforcement of epoxy coatings[J]. Chemical Engineering Journal,2020,389:124435. [82] 徐霞,王飞,毛健. 定向排列石墨烯/丁苯橡胶复合材料的电热性能研究[J]. 电子元件与材料,2020,39(3):23-27. XU Xia,WANG Fei,MAO Jian. Electrothermal properties of oriented graphene/styrene butadiene rubber composites[J]. Electronic Components and Materials,2020,39(3):23-27. |
| [1] | XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451. |
| [2] | LI Kai, JIANG Xiao, FANG Xuewei, CHEN Ruikai, WANG Hang, LI Changze, HUANG Ke, LU Bingheng. Effect of Laser Shock Peening on the Properties of Al-Zn-Mg Thin-walled Structures Fabricated by Wire Arc Directed Energy Deposition [J]. Journal of Mechanical Engineering, 2026, 62(3): 137-145. |
| [3] | LIN Fen, ZHU Xiaolong, ZHAO Youqun, LIU Xuanjiang, ZANG Liguo. Influence of Hinge Distribution Number on the Mechanical Properties of Mechanical Elastic Wheel [J]. Journal of Mechanical Engineering, 2026, 62(2): 344-353. |
| [4] | WU Jing, ZHOU Kun, JIANG Guiyun, HUANG Yun. Mechanism and Evaluation of Process Performance during Laser-induced Ablation Assisted Belt Grinding of SiCf/SiC Composites [J]. Journal of Mechanical Engineering, 2026, 62(1): 395-407. |
| [5] | LIU Yuanming, LIU Yanxiao, SHEN Hongzhuo, WANG Zhenhua, WANG Tao. Deformation Characteristic and Microstructure Evolution of Mg/Al Clad Plate in Corrugated Rolling [J]. Journal of Mechanical Engineering, 2025, 61(8): 85-97. |
| [6] | WANG Chenguang, WANG Haihang, YANG Jie, FAN Zhilei, ZHOU Entao, GE Ende, AN Qinglong, CHEN Ming. The Effect of Expansion Deformation on the Damage of Hole Wall and Fatigue Performance of Carbon Fiber Reinforced Composite Materials [J]. Journal of Mechanical Engineering, 2025, 61(7): 134-143. |
| [7] | HAN Jing, SHI Yu, LI Guang, ZHANG Hang, LU Gang. Study on the Microstructure and Mechanical Properties of Copper/Steel Joints Welded by Non-uniform Laser Source [J]. Journal of Mechanical Engineering, 2025, 61(6): 151-159. |
| [8] | MI Gaoyang, JIANG Yiming, WANG Chunming, ZHANG Mingyang, HU Yiyang, XIAO Yongkang, ZHAI Chuncheng, OUYANG Qiubao. Forming, Microstructure and Mechanical Properties of 7075 Al Joint Prepared Via Laser Beam Oscillating Welding [J]. Journal of Mechanical Engineering, 2025, 61(4): 86-95. |
| [9] | CUI Bing, JIANG Tao, ZHAO Weixing, FU Yucan, DU Quanbin. Effect of Ti3AlC2 Construction Gradient Interface on Brazing Diamond Abrasive Grains with Cu-20Sn-10Ti Filler Metals [J]. Journal of Mechanical Engineering, 2025, 61(4): 156-166. |
| [10] | CHEN Wei, HUANG Fenglei, ZENG Zhiheng, PI Aiguo. Study on the Influence of Embedded Sphere-Array on the Interface of Functional-Gradient Composite Plates Prepared Using Explosive Welding [J]. Journal of Mechanical Engineering, 2025, 61(24): 75-87. |
| [11] | LI Jie, FAN Jikang, CAI Baihao, DUAN Linye, YANG Dongqing, WANG Kehong. Effect of Preheating Temperature on the Bonding Quality between Wire Arc Additive Manufactured Magnesium Alloy and Substrate [J]. Journal of Mechanical Engineering, 2025, 61(22): 88-96. |
| [12] | LIU Mingli, SHI Chuang, GUO Hongwei, LIU Rongqiang. Mechanical Modeling and Deployment Analysis of Bistable Origami Flexible Arm [J]. Journal of Mechanical Engineering, 2025, 61(21): 227-236. |
| [13] | YANG Jia, ZHANG Shouzhuang, LU Xuan, XU Xin, WANG Ce, LIN Panpan, MEI Han, LIU Yue, HE Peng, LIN Tiesong. Study of Copper-based Composite Brazing Process of SiCf/SiC Composites with Cobalt-based High Temperature Alloys [J]. Journal of Mechanical Engineering, 2025, 61(21): 437-445. |
| [14] | WU Guanzhi, CHEN Nannan, SHI Huabing, LIU Kunshan, KONG Liang, WANG Min. Influence of Welding Parameters on Formation and Mechanical Properties of Lap Fillet Welded Carbon Steel Joints in Oscillation Laser Welding with Filler Wire [J]. Journal of Mechanical Engineering, 2025, 61(2): 172-180. |
| [15] | GENG Ruwei, ZHU Congcong, WEI Zhengying, MA Ninshu. Numerical Simulation and Experimental Study of Microstructure Transformation of Droplet Hybrid Arc Additive Manufacturing for Aluminum Alloy [J]. Journal of Mechanical Engineering, 2025, 61(18): 170-180. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
