• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2023, Vol. 59 ›› Issue (9): 40-50.doi: 10.3901/JME.2023.09.040

Previous Articles     Next Articles

Design and Analysis of an Exoskeleton Robot forIndex Finger Rehabilitation

TIAN Yu1, WANG Hongbo1,2,3, LIU Ying4, DU Jiazheng1,5, NIU Jianye1,5   

  1. 1. Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan University, Qinhuangdao 066004;
    2. Academy for Engineering&Technology, Fudan University, Shanghai 200433;
    3. Shanghai Clinical Research Center for Aging and Medicine, Shanghai 200040;
    4. Qinhuangdao Haigang Hospital, Qinhuangdao 066099;
    5. Key Laboratory of Advanced Forging&Stamping Technology and Science of Ministry of Education, Yanshan University, Qinhuangdao 066004
  • Received:2022-05-09 Revised:2022-09-21 Online:2023-05-05 Published:2023-07-19

Abstract: To tackle the problems of insufficient precision of operation as well as poor human-machine compatibility of conventional hand rehabilitation robots, a novel underactuated index finger exoskeleton is proposed based on human anatomy to meet the clinical demand. By adopting the combination of 2-UPS parallel mechanism and Bowden wire, two degree-of-freedom active movements of the metacarpophalangeal joint are accomplished, and the operation precision of the robot is enhanced. During the design process, the phalanx is regarded as a part of the human-machine closed chain and the coupling relationship between the flexion/extension and the adduction/abduction movements is discussed to clarify the relationship of the constraint conditions during the rehabilitation training, which improves the coordination characteristics in the movement between human and robot and also the human-machine compatibility. The inverse kinematics of the mechanism is solved, the workspace is analyzed through both the theoretical analysis and simulation verification. A prototype is built to test the robot's performance, and based on the questionnaire of 15 subjects, the comfortability of the device is evaluated by using the analytic hierarchy process. The results show that this robot can satisfy the rehabilitation needs of patients.

Key words: finger rehabilitation, kinematic analysis, workspace, simulation validation, performance test

CLC Number: