Research Progress of Diffraction Effect on the Ultra-precision Cutting Surface

doi:10.3901/JME.2022.03.266

Abstract

Abstract: Ultra-precision cutting technology is extensively applied in the key field of aerospace, clean energy and optical precision components fabrication, etc. However, when mirror fabricated by ultra-precision cutting technology is employed on the visible-wavelength, diffraction effect occurs, which degrades the work performance of metal mirror. To investigate the origins and develop suppression and elimination technology for ultra-precision cutting surface, scholars performed a lot of research. In this work, the research progress on the research work is concluded and summarized. First, the origins and theoretical models for the diffraction effect on the ultra-precision cutting surface are introduced. Then, advances in the suppression and elimination technology of diffraction effect on the ultra-precision cutting surface are summarized. The characteristics of different methods are analysed. Finally, the application of diffraction effect on the ultra-precision machining is introduced.

Key words: ultra-precision cutting surface, diffraction effect, suppression and elimination technique, polishing process

CLC Number:

TG519

HE Chunlei, REN Chengzu, WANG Shuqi, ZONG Wenjun. Research Progress of Diffraction Effect on the Ultra-precision Cutting Surface[J]. Journal of Mechanical Engineering, 2022, 58(3): 266-275.

References

[1] ZHANG S,ZHOU Y,ZHANG H,et al. Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications[J]. International Journal of Machine Tools and Manufacture,2019,142(1):16-41.
[2] ZONG W J,CAO Z M,HE C L,et al. Theoretical modelling and FE simulation on the oblique diamond turning of ZnS crystal[J]. International Journal of Machine Tools and Manufacture,2016,100(1):55-71.
[3] ZHAO Z,TO S,WANG J. Effects of grains and twins on deformation of commercial pure titanium in ultraprecision diamond turning[J]. Journal of Materials Processing Technology,2019,271(1):10-22.
[4] HEGGE M J,BAER J W,HARDAWAY L M R,et al. Diamond turned,light weight,athermal,visible TMA telescope for the planned New Horizons mission to Pluto[C]//Optomechanics 2005. International Society for Optics and Photonics,2005,5877:58770K.
[5] SHORE P,MORANTZ P,LEE D,et al. Manufacturing and measurement of the MIRI spectrometer optics for the James Webb space telescope[J]. CIRP Annals,2006,55(1):543-546.
[6] HE C L,ZONG W J,XUE C X,et al. An accurate 3D surface topography model for single-point diamond turning[J]. International Journal of Machine Tools and Manufacture,2018,134(1):42-68.
[7] HE C L,ZONG W J. Diffraction effect and its elimination method for diamond-turned optics[J]. Optics Express,2019,27(2):1326-1344.
[8] BONOD N,NEAUPORT J. Diffraction gratings:from principles to applications in high-intensity lasers[J]. Advances in Optics and Photonics,2016,8(1):156-199.
[9] TOISOUL A,GHOSH A. Practical acquisition and rendering of diffraction effects in surface reflectance[J]. ACM Transactions on Graphics (TOG),2017,36(5):1-16.
[10] SCHRODER S,DUPARRE A,CORIAND L,et al. Modeling of light scattering in different regimes of surface roughness[J]. Optics Express,2011,19(10):9820-9835.
[11] HARVEY J,KRYWONOS A,VERNOLD C L. Modified Beckmann-Kirchhoff scattering model for rough surfaces with large incident and scattering angles[J]. Optical Engineering,2007,46(7):1-10.
[12] ELSON J M,BENNETT J M. Vector scattering theory[J]. Optical Engineering,1979,18(2):1-9.
[13] STOVER J C. Optical scattering:measurement and analysis[M]. Bellingham:SPIE Optical Engineering Press,1995.
[14] BENNETT H E,PORTEUS J O. Relation between surface roughness and specular reflectance at normal incidence[J]. Journal of the Optical Society of America,1961,51(2):123-129.
[15] CHOI N,HARVEY J E. Numerical validation of the generalized Harvey-Shack surface scatter theory[J]. Optical Engineering,2013,52(11):1-15.
[16] KRYWONOS A,HARVEYJ E,CHOI N. Linear systems formulation of scattering theory for rough surfaces with arbitrary incident and scattering angles[J]. Journal of the Optical Society of America A,2011,28(6):1121-1138.
[17] HARVEY J E,CHOIN,SCHROEDER S,et al. Total integrated scatter from surfaces with arbitrary roughness,correlation widths,and incident angles[J]. Optical Engineering,2012,51(1):1-12.
[18] STOVER J C. Light scatter metrology of diamond turned optics[C]//Advanced Characterization Techniques for Optics,Semiconductors,and Nanotechnologies II. International Society for Optics and Photonics,2005,5878:58780R.
[19] 黄昆涛,房丰洲,宫虎. 超精密车削表面微观形貌对光学特性的影响[J]. 光学精密工程,2013,1(1):101-107. HUANG Kuntao,FANG Fengzhou,GONG Hu. Effect of surface microscopic topology generated by ultra-precision turning on optical characteristics[J]. Optics and Precision Engineering,2013,1(1):101-107.
[20] FANG F Z,HUANG K T,GONG H,et al. Study on the optical reflection characteristics of surface micro-morphology generated by ultra-precision diamond turning[J]. Optics and Lasers in Engineering,2014,62(1):46-56.
[21] LI L,COLLINS S A,ALLEN Y Y. Optical effects of surface finish by ultraprecision single point diamond machining[J]. Journal of Manufacturing Science and Engineering,2010,132(2):1-9.
[22] LI L. Investigation of the optical effects of single point diamond machined surfaces and the applications of micro machining[D]. Columbus:Ohio State University,2009.
[23] 吴东旭. 大尺寸微结构辊筒模具超精密车削若干关键技术研究[D]. 哈尔滨:哈尔滨工业大学,2013. WU Dongxu. Research on several key technologies of ultra-precision diamond turning of large-scale microstructured roller mold[D]. Harbin:Harbin Institute of Technology,2013.
[24] LONDONO C,CLARK P P. Modeling diffraction efficiency effects when designing hybrid diffractive lens systems[J]. Applied Optics,1992,31(13):2248-2252.
[25] HE C L,WANG S J,ZONG W J,et al. Influence of tool edge waviness on the diffraction effect of diamond-turned optics:theoretical simulation and experimental validation[J]. Applied optics,2019,58(6):1596-1605.
[26] HE C L,ZONG W J. Influence of multifrequency vibration on the optical performance of diamond-turned optics and its elimination method[J]. Applied Optics,2019,58(16):4241-4249.
[27] 何春雷. 铝合金超精密车削表面微观形貌对衍射效应影响的研究[D]. 哈尔滨:哈尔滨工业大学,2019. HE Chunlei. Investigation on the influence of ultraprecision turning aluminium alloy surface micro morphology on the diffraction effect[D]. Harbin:Harbin Institute of Technology,2019.
[28] ZHU Z,ZHOU X,LUO D,et al. Development of pseudo-random diamond turning method for fabricating freeform optics with scattering homogenization[J]. Optics Express,2013,21(23):28469-28482.
[29] ZHU Z,ZHOU X,LIU Z,et al. Development of a piezoelectrically actuated two-degree-of-freedom fast tool servo with decoupled motions for micro-/nano-machining[J]. Precision Engineering,2014,38(4):809-820.
[30] TO S,ZHU Z,WANG P. Evolutionary diamond turning of optics for error correction covering a wide spatial spectrum[J]. Optical Engineering,2015,54(1):1-8.
[31] ZHU Z,TO S,ZHANG S. Active control of residual tool marks for freeform optics functionalization by novel biaxial servo assisted fly cutting[J]. Applied optics,2015,54(25):7656-7662.
[32] WAMBOLDT L,ROY B,CRIFASI J,et al. An ultra-low surface finish process for 6061-Al mirrors[C]//Infrared Technology and Applications XLI. International Society for Optics and Photonics,2015,9451:94511X.
[33] MARTINSON K. Diamond turning enters a new era[J]. Photonics Spectra,2004,38(4):74-75.
[34] LI Z,WANG J,PENG X,et al. Abrasive jet polishing and its applications in surface finishing[J]. Current Research in Nanotechnology,2010,1(1):86-93.
[35] LI Z Z,WANG J M,PENG X Q,et al. Removal of single point diamond-turning marks by abrasive jet polishing[J]. Applied optics,2011,50(16):2458-2463.
[36] NAMBA Y,SHIMOMURA T,FUSHIKI A,et al. Ultra-precision polishing of electroless nickel molding dies for shorter wavelength applications[J]. CIRP Annals,2008,57(1):337-340.
[37] NAMBA Y,TSUWA H,WADA R,et al. Ultra-precision float polishing machine[J]. CIRP Annals,1987,36(1):211-214.
[38] NAMBA Y,OHNISHI N,YOSHIDA S,et al. Ultra-precision float polishing of calcium fluoride single crystals for deep ultra violet applications[J]. CIRP Annals,2004,53(1):459-462.
[39] GUO J,BEAUCAMP A,IBARAKI S. Virtual pivot alignment method and its influence to profile error in bonnet polishing[J]. International Journal of Machine Tools and Manufacture,2017,122(1):18-31.
[40] BEAUCAMP A,NAMBA Y. Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishing[J]. CIRP Annals,2013,62(1):315-318.
[41] 王朋,杜雪,回长顺. 金刚石车削表面微纳织构的气囊抛光改进[J]. 光学学报,2015,35(3):1-7. WANG Peng,SUET To,HUI Changshun. Improvement of the diamond turned surface texture by bonnet polishing process[J]. Acta Optica Sinica,2015,35(3):1-7.
[42] 张艺,尹自强,尹国举. 铝合金表面的直接光学抛光实验[J]. 应用光学,2014,35(4):675-680. ZHANG Yi,YIN Ziqiang,YIN Guoju. Direct optical polishing research on surface of aluminum alloy[J]. Journal of Applied Optics,2014,35(4):675-680.
[43] YIN Z,ZHANG Y. Direct polishing of aluminum mirrors with higher quality and accuracy[J]. Applied Optics,2015,54(26):7835-7841.
[44] ULITSCHKA M,BAUER J,FROST F,ARNOLD T. Improvement of the optical properties after surface error correction of aluminium mirror surfaces[J]. Journal of the European Optical Society-Rapid Publications,2021,17:1-13.
[45] ULITSCHKA M,BAUER J,DORNBERG G,et al. Local smoothing of optical aluminum surfaces by reactive ion beam etching[J]. Optical Engineering,2020,59(3):035108.
[46] HE C L,ZONG W J,SUN T. Origins for the size effect of surface roughness in diamond turning[J]. International Journal of Machine Tools and Manufacture,2016,106(1):22-42.
[47] FIORESE E,BONOLLO F,TIMELLI G,et al. New classification of defects and imperfections for aluminum alloy castings[J]. International Journal of Metalcasting,2015,9(1):55-66.
[48] HOCHENG H,TSENG H C,HSIEH M L,et al. Tool wear monitoring in single-point diamond turning using laser scattering from machined workpiece[J]. Journal of Manufacturing Processes,2018,31(1):405-415.
[49] WU D,WANG B,FANG F. Effects of tool wear on surface micro-topography in ultra-precision turning[J]. International Journal of Advanced Manufacturing Technology,2019,102(9-12):4397-4407.
[50] BRUZZONEA A G,LONARDO P M,TRAVERSO A. Diffraction pattern analysis for real time monitoring of tool wear in turning processes[J]. International Journal of Mechatronics and Manufacturing Systems,2009,2(5-6):515-531.
[51] CHURCH E L,JENKINSON H A,ZAVADA J M. Measurement of the finish of diamond-turned metal surfaces by differential light scattering[J]. Optical Engineering,1977,16(4):1-15.
[52] OHTSUBO J. Measurement of roughness properties of diamond-turned metal surfaces using light-scattering method[J]. Journal of the Optical Society of America A,1986,3(7):982-987.