[1] |
DU Jun, WANG Qianyuan, HE Jimiao, ZHANG Yongheng, WEI Zhengying.
Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(5): 219-230.
|
[2] |
WANG Binkai, CHANG Bo, ZHANG Heng.
Capillary Force Based Micromanipulation of Chips
[J]. Journal of Mechanical Engineering, 2023, 59(6): 285-294,308.
|
[3] |
DU Jun, WU Yunxiao, JIANG Minbo, WEI Zhengying.
Molten Pool Dynamics and Particle Migration Behavior during TIG-assisted Droplet Deposition Manufacturing of SiC Particle-reinforced Aluminum Matrix Composites
[J]. Journal of Mechanical Engineering, 2023, 59(3): 318-327.
|
[4] |
MA Zhaoxuan, LIU Yibo, WANG Jianfeng, SUN Qingjie.
Underwater Local Dry TIG Welding of Duplex Stainless Steel
[J]. Journal of Mechanical Engineering, 2022, 58(4): 48-54.
|
[5] |
YANG Chao, WANG Yingjun, XU Yanli, CAI Jing, YU Baohai, NI Dingrui.
Microstructure and Mechanical Properties of TIG and Friction Stir Welded Joints of Sc-contained High Strength Aluminum Alloy Sheet
[J]. Journal of Mechanical Engineering, 2020, 56(6): 221-228.
|
[6] |
YU Chen, CHEN Jing, CHEN Huaining, ZHANG Yupeng, FANG Weiping.
Triaxial Stresses in TC4 Ti-alloy Weldments by Magnetically Controlled Narrow Gap TIG Welding before and after PWHT
[J]. Journal of Mechanical Engineering, 2019, 55(6): 61-66.
|
[7] |
ZHANG Baori, GU Shengyong, SHI Yonghua.
Robotic Deep Penetration K-TIG Welding System Based on Weld Penetration Detection
[J]. Journal of Mechanical Engineering, 2019, 55(17): 14-21.
|
[8] |
HUANG Yifei, LUO Zhen, AO Sansan, FAN Wenfei.
Numerical Simulation of Keyhole TIG Welding of Dissimilar Steels Based on Asymmetric Heat Source
[J]. Journal of Mechanical Engineering, 2018, 54(2): 41-47.
|
[9] |
ZHANG Xiaohong, MA Pengzhao, ZHANG Kang, CHEN Jingqing, CHEN Hui.
Study on Controlling of Welding Seam Microstructure about Nickel-based High-temperature Alloy by Pulse TIG Welding Process
[J]. Journal of Mechanical Engineering, 2018, 54(2): 93-101.
|
[10] |
CHEN Ping, LI Junling, SHAO Tianmin, XIANG Xin, LIU Guanglei.
Optimal Analysis of Geometric Parameters of Surface Texture with Surface Tension Considered
[J]. Journal of Mechanical Engineering, 2016, 52(19): 123-131.
|
[11] |
HUANG Jiankang, SUN Tianliang, FAN Ding, SHI Yu.
Study on the Surface Flow Behavior of TIG Weld Pool
[J]. Journal of Mechanical Engineering, 2016, 52(18): 31-37.
|
[12] |
XIAO Lei, FAN Ding, HUANG Zicheng, HUANG Jiankang, WANG Xinxin.
Three-dimensional Numerical Analysis of Interaction between Arc and Pool by Considering the Behavior of the Metal Vapor in Stationary Activating Tungsten Inert Gas Welding
[J]. Journal of Mechanical Engineering, 2016, 52(16): 93-99.
|
[13] |
LI Yingmin, WANG Tianshu, LIU Weihua, REN Yuyan.
Synthesis and Properties of Modified Water Soluble Polymer Adhesive
[J]. Journal of Mechanical Engineering, 2016, 52(14): 67-72.
|
[14] |
HUANG Yong;FAN Ding;LIN Tao;LUO Huansheng;YAN Xin;YANG Yuanjiang.
Arc Assisted Activating TIG Welding Process for Stainless Steels
[J]. , 2010, 46(8): 68-72.
|
[15] |
HUANG Yong;FAN Ding;SHAO Feng.
Mechanism of Activating Fluxes Increasing Weld Penetration of AC FZ-TIG Welding for Aluminum Alloys
[J]. , 2010, 46(16): 113-118.
|