NUMERICAL SIMULATION ON THE SINTERING PROCESS OF CERAMICS PRODUCTS

Abstract

Abstract: A simulation method of ceramics products in sintering is firstly proposed by using rigid-plastic finite element method of compressibility material. The concept of driving force of shrink is used in this model. Comparing the simulation result with experiment, a good identity of results has been reached. In applied instance of complicated shape of product after sintering, the cause of shape distortion is analyzed by using this simulation method. This research accomplishment will be a great help to improve the quality of ceramics sintering product, reduce the revising value of the shape after sintering, and reduce the manufacturing cost of the product.

Key words: Ceramics, Finite element method, Numerical analysis, Sinter

CLC Number:

TH164

Huang Zongnan. NUMERICAL SIMULATION ON THE SINTERING PROCESS OF CERAMICS PRODUCTS[J]. , 2004, 40(3): 124-127.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I3/124

[1]	XU Zhuo, YAO Nan, GU Dawei, TAN Dapeng, LI Hui, WEN Bangchun. Research on the Nonlinear Damping Characteristics of Foam-filled All-composite Honeycomb-core Sandwich Panels [J]. Journal of Mechanical Engineering, 2026, 62(7): 308-323.
[2]	LI Lincong, WANG Shengquan, ZENG Xiang, CAI Yong, HE Xiaowei. High-order and Low-order Coupled Simulation Method for Automotive Collision and Development of a Realistic Simulation Platform [J]. Journal of Mechanical Engineering, 2026, 62(6): 314-324.
[3]	ZHU Zhihong, MIU Junwei, WANG Yujian, LI Wanli. Computer-aided Design of Multimodal Non-spherical Cu Pastes and Their Low-temperature Sintering Behaviors [J]. Journal of Mechanical Engineering, 2026, 62(4): 215-223.
[4]	HUANG Chuanzhen, ZHANG Renkai, WANG Zhen, XU Longhua, HUANG Shuiquan, QU Meina, XU Zhengkai, ZHANG Dijia, GUO Baosu, JIN Tianye, WANG Xiaodan. Research on Preparation and Properties of Ceramic Slurries with High Solid Content/low Viscosity [J]. Journal of Mechanical Engineering, 2026, 62(3): 260-270.
[5]	DING Yi, XU Chenyu, HE Jiankang, YUE Junyu, YU Kun, LI Jiaxin, HUO Ziyao, LI Dichen. Robotic Aerosol Jet Printing of Conformal Microscale Circuits with In-situ Laser Sintering [J]. Journal of Mechanical Engineering, 2026, 62(3): 282-297.
[6]	ZHU Ruikang, JIA Qiang, WANG Yishu, ZHANG Hongqiang, MA Limin, ZOU Guisheng, GUO Fu. Application Challenges and Research Progress of Copper Sintering for Power Module Packaging [J]. Journal of Mechanical Engineering, 2026, 62(2): 115-130.
[7]	HU Bin, ZHAO Xin, ZHANG Xin, LUO Yifei, LU Liantao, WEN Zefeng. Study on Rail Rolling Contact Fatigue Model in Consideration of Transient Rolling Contact Solutions within Wheel-rail Contact Patch [J]. Journal of Mechanical Engineering, 2026, 62(2): 354-366.
[8]	YANG Shaofei, WANG Dongliang, LI Jianqiang, ZHANG Ming, LU Songbing. Response Analysis of Landing Leg Deployment and Landing Transient Impact of Reusable Launch Vehicle [J]. Journal of Mechanical Engineering, 2026, 62(1): 159-170.
[9]	SHEN Xinxin, QIAN Mingfang, ZHANG Xuexi, SUN Liangbo, GENG Lin. Effect of Sintering Temperatures on Martensitic Transformation and Magnetic Properties of Ni-Mn-Ga Alloys Prepared through Binder Jetting Additive Manufacturing [J]. Journal of Mechanical Engineering, 2025, 61(9): 157-167.
[10]	FANG Zhiqiang, ZHANG Yangze, WU Jiamin, MAO Chen, CHEN Ying. Effect of Ferrocene Content on the Properties of SLS-CVR Formed SiC_nw/SiC Absorbing Ceramics [J]. Journal of Mechanical Engineering, 2025, 61(23): 321-330.
[11]	HU Lei, DU Jiaqing, WANG Rui, WANG Xue. Optimization of Local Post Weld Heat Treatment Parameters for 9%Cr Heat Resistant Steel Welded Pipes [J]. Journal of Mechanical Engineering, 2025, 61(20): 113-122.
[12]	LIU Fuchu, WANG Miao, ZHANG Chi, LIN Xuexiong. Synergistic Optimization of Porosity and Flexural Strength of Alumina Porous Ceramics Fabricated by 3D Printing Method Based on Response Surface Methodology [J]. Journal of Mechanical Engineering, 2025, 61(19): 386-396.
[13]	YANG Bing, Lü Peijin, HUANG Mian, XU Yanhui, XIAO Shoune, YANG Guangwu, ZHU Tao. Simulation of Surface Residual Stress in Railway Axles and Its Influence on Crack Propagation Behavior [J]. Journal of Mechanical Engineering, 2025, 61(18): 230-239.
[14]	GUO Lei, TIAN Wenqing, CHEN Hui, CAI Chao, SHI Yusheng. Discrete Element-finite Element Coupled Simulation and Deformation Prediction Method for Powder Hot Isostatic Pressing [J]. Journal of Mechanical Engineering, 2025, 61(16): 83-91.
[15]	LIU Lifei, LIANG Fengshuang, WU Mingyang, ZHANG Mingde. Study on the Damage Formation Mechanism of RB-SiC Ceramics Based on Dynamic Indentation [J]. Journal of Mechanical Engineering, 2025, 61(13): 449-460.

NUMERICAL SIMULATION ON THE SINTERING PROCESS OF CERAMICS PRODUCTS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments