Research and Application of Mathematical Model of Ship Sectional Multi-station Cooperative Manufacturing System

doi:10.3901/JME.2020.09.191

Abstract

Abstract: Aiming at the problems of poor flexibility of production planning, untimely processing of abnormal information and slow response to system changes in the production process of ship sectional manufacturing, a cooperative control system for the production process is proposed. Through the analysis of collaborative model, the dynamic adjustment mechanism of multi-station collaboration, the manufacturing mathematical model of multi-station collaborative system is built, and the collaborative results are verified by case listing. The application of multi-station collaborative mathematical model can effectively improve the accuracy and flexibility of production planning, realize the interconnection of shipbuilding workshops, and is of great significance to improve the production efficiency of shipbuilding.

Key words: interconnection, multi-station cooperative manufacturing system, mathematical model, dynamic collaboration mechanism

CLC Number:

U673

ZHANG Qian, SHAN Zhongde, WU Le, WANG Shaozong, TIAN Yuan. Research and Application of Mathematical Model of Ship Sectional Multi-station Cooperative Manufacturing System[J]. Journal of Mechanical Engineering, 2020, 56(9): 191-198.

References

[1] 邸立强,杨剑征,赵川. 国外数字化造船技术发展趋势研究[J]. 舰船科学技术, 2015, 37(7):1-4. DI Liqiang, YANG Jianzheng, ZHAO Chuan. Development of foreign digital shipbuilding technique[J]. Ship Science and Technology, 2015, 37(7):1-4.
[2] 兰宏凯,杨志,柳存根,等. 船舶平面分段流水线模糊调度系统开发[J]. 船舶工程, 2018, 40(11):18-22. LAN Hongkai, YANG Zhi, LIU Cungen, et al. Development of ship plane segmented line fuzzy scheduling system[J]. Ship Engineering, 2018, 40(11):18-22.
[3] HAMID S H, ZHANG Zhihai, OMID Z, et al. Trade-off between the costs and the fairness for a collaborative production planning problem in make-to-order manufacturing[J]. Computers & Industrial Engineering, 2018, 126:421-434.
[4] 谢志强,张晓欢,高一龙,等. 考虑串行工序紧密度的择时综合调度算法[J]. 机械工程学报, 2018, 54(6):191-202. XIE Zhiqiang, ZHANG Xiaohuan, GAO Yilong, et al. Time-selective integrated scheduling algorithm considering the compactness of serial processes[J]. Journal of Mechanical Engineering, 2018, 54(6):191-202.
[5] 苏翔,孙红霞. 基于MES的造船企业车间作业调度系统研究[J]. 造船技术, 2009(3):23-27. SU Xiang, SUN Hongxia. Research on job shop scheduling system of shipbuilding enterprise based on MES[J]. Marine Technology, 2009(3):23-27.
[6] 张光发,刘玉君,纪卓尚. 船舶分段建造计划仿真与优化[J]. 计算机集成制造系统, 2011, 17(12):2643-2651. ZHANG Guangfa, LIU Yujun, JI Zhuoshang. Simulation and optimization of ship block-building planning[J]. Computer Integrated Manufacturing Systems, 2011, 17(12):2643-2651.
[7] PAN Tianyi, ZHANG Zhihai, CAO Hui. Collaborative production planning with production time windows and order splitting in make-to-order manufacturing[J]. Computers & Industrial Engineering, 2014, 67.
[8] KAMENG N, WANG Zhenbo, FABRICE T N, et al. A combination of flow shop scheduling and the shortest path problem[J]. Journal of Combinatorial Optimization, 2015, 29(1):36-52.
[9] YU Yihao, WANG Yanhong. Design and implementation of a real-time Jobshop scheduling system[C]//2012 IEEE 19th International Conference on Industrial Engineering and Engineering Management(IE&EM 2012).
[10] CAPUTO G. Optimization of production plan through simulation techniques[J]. WSEAS Transactions on Information Science and Application, 2009(6):352-362.
[11] 王超,刘阶萍,常伟涛,等. 不确定条件下的作业车间生产调度综述[J]. 装备制造技术, 2011(4):144-148, 154. WANG Chao, LIU Jieping, CHANG Weitao, et al. Summary of production scheduling of the work workshop under uncertain conditions[J]. Equipment Manufacturing Technology, 2011(4):144-148, 154.
[12] 张蕾. 复杂作业模式下车间动态调度问题的研究[J]. 机械设计与制造工程, 2013, 42(3):41-44. ZHANG Lei. Study on the dynamic scheduling of the workshop in the complex working mode[J]. Mechanical Design and Manufacturing Engineering, 2013, 42(3):41-44.

[1]	LI Shouzhong, GUAN Yunyi, MA Chong, ZHAO Jianlong, ZHAO Hongzhe. Modeling and Experiment of Passive Variable Stiffness Actuator for Upper Limb Rehabilitation Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 47-54.
[2]	WANG Meiyu, ZHANG Haobo, HU Weibo, MEI Yunhui. Review on the through Silicon Via Technology in the 3D-system in Package (3D-SiP) [J]. Journal of Mechanical Engineering, 2024, 60(19): 261-276.
[3]	LIU Sude, WANG Zixin, JING Ziyang, SHI Dawei, WU Shuqun. Review of Electrical Fires Caused by Cable Arcing Faults in Aviation [J]. Journal of Electrical Engineering, 2023, 18(3): 18-34.
[4]	LI Hongzhu, WANG Zeming, FAN Longlong. Research on Current Ripple of Coupling Inductor in Magnetically Integrated Converter [J]. Journal of Electrical Engineering, 2023, 18(2): 97-107.
[5]	CHEN Xin, CHEN Yun, YANG Zhijun, GAO Jian, CHEN Xun. Research Advances in Several Key Technologies for High Precision and High Efficiency Manufacturing of Electronic Devices [J]. Journal of Mechanical Engineering, 2023, 59(19): 164-175.
[6]	GAO Yiping, LI Xinyu, SHAN Hangguan, FAN Xiaohui, GAO Liang, LIU Qihao. Research on Proactive Scheduling Theory and Method Enabled by 5G Technology for Intelligent Discrete Manufacturing Shop [J]. Journal of Mechanical Engineering, 2023, 59(12): 38-46.
[7]	DONG Xinhong, SUN Pengwen, ZHANG Lanting, WANG Zongtao. Multi-objective Optimization of Ply Parameters for Wind Turbine Blade [J]. Journal of Mechanical Engineering, 2022, 58(4): 165-173.
[8]	WU Zhuohuan, LIU Wei, WEN Zhicheng, WANG Yiping, TIAN Yanhong, WANG Chunqing. Fabrication of Micron-Cu@Ag and Nano-Ag Particle Connection Material and Study of High Frequency Induction Rapid Sintering Method [J]. Journal of Mechanical Engineering, 2022, 58(2): 26-33.
[9]	FANG Junpeng, WANG Qian, CAI Jian, WAN Hanlin, SONG Changming, ZHENG Kai, ZHOU Yikang. Research on Low-temperature Bonding Technology Using Metal Nanoparticles Prepared by Magnetron Sputtering [J]. Journal of Mechanical Engineering, 2022, 58(2): 34-42.
[10]	ZHU Zhida, WANG Wenjun, KOU Haijiang, ZENG Li, DAI Min, ZHANG Fan. Research on Modeling and Simulation of Cooperative Control for Multi-degree-of-freedom Rotor System of Magnetic Bearing [J]. Journal of Mechanical Engineering, 2021, 57(17): 173-184.
[11]	LEI Zheng, WANG Qiming, GAN Hengqian, ZHU Ming, JIANG Peng. Filtration System for Hydraulic Actuators of FAST [J]. Journal of Mechanical Engineering, 2020, 56(4): 218-223.
[12]	LI Guojie. Key Characteristics and General Framework of Control System for Intelligent Crane [J]. Journal of Mechanical Engineering, 2020, 56(24): 254-268.
[13]	LIANG Zhiqiang, LI Shidi, ZHOU Tianfeng, GAO Peng, ZHANG Dongdong, WANG Xibin. Research on Grinding of Micro Ball End Mill with Equal Normal Rake Angle and Equal Radial Relief Angle [J]. Journal of Mechanical Engineering, 2019, 55(5): 196-203.
[14]	ZHENG Dazhou,ZENG Dong,LI Guanglei,LU Rui. Building and Simulation Research on the Electrical Model of DFIG [J]. Journal of Electrical Engineering, 2019, 14(3): 81-89.
[15]	PEI Lina,SUN Dongxu. Research on Dynamic Mathematical Model and Simulation of Wind Power Pitch Control System Based on Matlab Simulink [J]. Journal of Electrical Engineering, 2019, 14(2): 66-70.