FINITE ELEMENT SIMULATED RESEARCH OF SPRING DURING ARCHED TROUGH PLATE TAKES SHAPE

Abstract

Abstract: Finite element simulation during arched trough plate takes shape, which analyzes how spring influences taking arch and deformation of arched trough plate, at the same time, taking experimented research through arched trough plate takes shape, and a expected continuity between the calculated conclusion of finite element simulation and the experimented conclusion provided the theoretical proof for technological parameter of making arched metal roof .

Key words: Arched trough plate, Finite element method, Spring, Take shape, Failure modes, Polychromatic sets , Recycling products, Design for remanufacture(DfRem)

CLC Number:

TH871

Sun Yanping;Huang Qiubo;Zhang Dechen. FINITE ELEMENT SIMULATED RESEARCH OF SPRING DURING ARCHED TROUGH PLATE TAKES SHAPE[J]. , 2002, 38(12): 138-141.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I12/138

[1]	CHEN Junjie, TANG Yuzhou, YANG Shujun, WU Mingyu. Constitutive Model of Anisotropic Hyper-viscoelasticity for Double-layer Cord Reinforced Air Spring Rubber Bellows [J]. Journal of Mechanical Engineering, 2026, 62(8): 49-59.
[2]	XU Zhuo, YAO Nan, GU Dawei, TAN Dapeng, LI Hui, WEN Bangchun. Research on the Nonlinear Damping Characteristics of Foam-filled All-composite Honeycomb-core Sandwich Panels [J]. Journal of Mechanical Engineering, 2026, 62(7): 308-323.
[3]	LI Lincong, WANG Shengquan, ZENG Xiang, CAI Yong, HE Xiaowei. High-order and Low-order Coupled Simulation Method for Automotive Collision and Development of a Realistic Simulation Platform [J]. Journal of Mechanical Engineering, 2026, 62(6): 314-324.
[4]	HU Bin, ZHAO Xin, ZHANG Xin, LUO Yifei, LU Liantao, WEN Zefeng. Study on Rail Rolling Contact Fatigue Model in Consideration of Transient Rolling Contact Solutions within Wheel-rail Contact Patch [J]. Journal of Mechanical Engineering, 2026, 62(2): 354-366.
[5]	YANG Shaofei, WANG Dongliang, LI Jianqiang, ZHANG Ming, LU Songbing. Response Analysis of Landing Leg Deployment and Landing Transient Impact of Reusable Launch Vehicle [J]. Journal of Mechanical Engineering, 2026, 62(1): 159-170.
[6]	LI Xia, WU Lei, WEN Zefeng, JIN Xuesong, WANG Anbin. Study on the Rail Corrugation at Weld Joint of Steel Spring Floating Slab Track II：Formation Mechanism [J]. Journal of Mechanical Engineering, 2025, 61(6): 260-267.
[7]	LIANG Dong, HAN Zhiqiang, SONG Yimin, CHANG Boyan. Stiffness Modelling and Performance Evaluation of a Large Loading SCARA Parallel Robot [J]. Journal of Mechanical Engineering, 2025, 61(21): 213-226.
[8]	ZHAN Lihua, ZHAO Shuai, YANG Youliang, CHEN Zanchong, XIE Hao, LIU Changzhi, YAN Dongyang. High Precision and Rapid Springback Prediction for Creep Forming of Ribbed Panel Based on SPSO-BP Neural Network [J]. Journal of Mechanical Engineering, 2025, 61(20): 81-90.
[9]	HU Lei, DU Jiaqing, WANG Rui, WANG Xue. Optimization of Local Post Weld Heat Treatment Parameters for 9%Cr Heat Resistant Steel Welded Pipes [J]. Journal of Mechanical Engineering, 2025, 61(20): 113-122.
[10]	YANG Yifan, CHEN Shiqian, WANG Kaiyun, XIAO Feixiong, MA Chengxiang. Fracture Cause Research and Structural Optimization for the Heavy-Haul Locomotive Coil Spring Based on Modal Resonance Theory [J]. Journal of Mechanical Engineering, 2025, 61(2): 247-256.
[11]	CHEN Zhaowei, WANG Lang, LI Shihui, YUAN Miao, PU Qianhua, YANG Jizhong, CHEN Zhihui. Study on Reliability of Rack System on Super-slope Bridge of Rack Railway under Extreme Temperature Load [J]. Journal of Mechanical Engineering, 2025, 61(18): 267-277.
[12]	YANG Bing, Lü Peijin, HUANG Mian, XU Yanhui, XIAO Shoune, YANG Guangwu, ZHU Tao. Simulation of Surface Residual Stress in Railway Axles and Its Influence on Crack Propagation Behavior [J]. Journal of Mechanical Engineering, 2025, 61(18): 230-239.
[13]	GUO Lei, TIAN Wenqing, CHEN Hui, CAI Chao, SHI Yusheng. Discrete Element-finite Element Coupled Simulation and Deformation Prediction Method for Powder Hot Isostatic Pressing [J]. Journal of Mechanical Engineering, 2025, 61(16): 83-91.
[14]	QI Yutong, SUN Chuyan, LI Shuhui. Study on the Deformation Behavior and Springback Prediction of 7075 Aluminum Alloy at Cryogenic Temperature [J]. Journal of Mechanical Engineering, 2025, 61(14): 99-107.
[15]	WU Fangxing, YANG Guang, WANG Qiliang, FAN Xiaobo. Research on Springback of Aluminum Alloy Spherical Shell at Gradient Cryogenic Temperature [J]. Journal of Mechanical Engineering, 2025, 61(14): 108-116.

FINITE ELEMENT SIMULATED RESEARCH OF SPRING DURING ARCHED TROUGH PLATE TAKES SHAPE

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments