ALGORITHM FOR AUTOMATICA-LLY DETECTING SPURIOUS VECTORS IN PIV DATA

›› 2004, Vol. 40 ›› Issue (7): 89-92.

• Article • Previous Articles Next Articles

ALGORITHM FOR AUTOMATICA-LLY DETECTING SPURIOUS VECTORS IN PIV DATA

Ruan Xiaodong;Wu Feng;Yang Huayong;Yamamoto F

The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University Institute of Power Machinery and Vehicle Engineering, Zhejiang University Department of Mechanical Engineering, Fukui University, Japan

Published:2004-07-15

Abstract

Abstract: A new algorithm for automatically detecting spurious vectors in PIV data is set up by using Delauney tessellation technique and considering continuity of fluid. The method is justified by simulating a solid rotational flow. The results show that the method can identify the spurious vectors precisely. In addition, the deleted points can be interpolated by the Delauney tessellation technique and the full-field velocity vectors can be obtained. Finally, the new method is applied to the real experimental images.

Key words: Deleting, PIV, Post-processing, Spurious vector

CLC Number:

TB937

Ruan Xiaodong;Wu Feng;Yang Huayong;Yamamoto F. ALGORITHM FOR AUTOMATICA-LLY DETECTING SPURIOUS VECTORS IN PIV DATA[J]. , 2004, 40(7): 89-92.

[1]	DU Heng, REN Tianyu, HE Yongyao, ZHU Xiaowei, LIU Qihui, ZHAO Jingyi. Study on Pivot Steering Resistance Torque of Heavy Vehicle Tire Considering Hysteretic Behavior [J]. Journal of Mechanical Engineering, 2023, 59(4): 241-256.
[2]	YANG Qijiang, LI Weiguang, GUO Mingjun, ZHAO Xuezhi, LI Duanneng. Research on Initial Working Mechanism of fluid Pivot Floating Bearing and Floating Characteristics of Single Bottom Pad Bearing [J]. Journal of Mechanical Engineering, 2021, 57(7): 125-137.
[3]	FANG Yujian, ZHANG Min, SUN Xianpeng, ZHANG Jinfeng, QU Yefei. Study on Internal Flow Characteristics of Non-Newtonian Fluids in Mechanical Stirred Tank [J]. Journal of Mechanical Engineering, 2021, 57(20): 244-253.
[4]	HU Jianjun, YANG Ziwen, JIN Yaolan, WANG Simin, KONG Xiangdong. Dynamic Flow-field Characteristics of Close-range Submerged Impinging Jet [J]. Journal of Mechanical Engineering, 2020, 56(22): 263-270.
[5]	QIN Hongling, GUO Wentao, LI Xuefei, ZHAO Xinze, XU Xiang. Tribological Performance of Gate Bottom Pivot Friction Pair QT600-3/40Cr and Its Wear Surface Power Spectral Density Characterization [J]. Journal of Mechanical Engineering, 2019, 55(17): 102-109.
[6]	LI Yongzhen, BI Shusheng, ZHAO Hongzhe, YANG Qizi, ZHANG Shuqing. Influence of Vertical Loads on Quasi-constant Rotational Stiffness of The Cross-spring Flexure Pivot [J]. Journal of Mechanical Engineering, 2018, 54(3): 1-7.
[7]	ZHANG Jin, GONG Xuezhi, HU Jianjun, QUAN Lingxiao, HA Liang, KONG Xiangdong. CFD Analysis of the Turbulence Model Adopted in Distribution Process in Axial Piston Pump [J]. Journal of Mechanical Engineering, 2018, 54(18): 204-211.
[8]	YANG Miao, DU Zhijiang, CHEN Yi, SUN Lining, DONG Wei. Static Modelling and Analysis of Cross-spring Flexure Pivots with Variable Cross-section [J]. Journal of Mechanical Engineering, 2018, 54(13): 73-78.
[9]	BI Shusheng, YANG Qizi, LIU Lang, ZHAO Hongzhe. Study of Zero Stiffness Flexural Pivot Based on Spring-crank Mechanism [J]. Journal of Mechanical Engineering, 2018, 54(13): 86-93.
[10]	ZHANG Yongfang, XIAO Liangjun, LI Xianwei, ZHAO Jingqun, LI Sha. Analysis of Nonlinear Motion of A Rotor System Supported by Fixed-tilting Pad Self-acting Aerodynamic Bearings [J]. Journal of Mechanical Engineering, 2018, 54(11): 187-196.
[11]	ZHOU Zhenggan, LI Yang, ZHOU Wenbin. Ultrasonic Phased Array Post-processing Imaging Techniques：A Review [J]. Journal of Mechanical Engineering, 2016, 52(6): 1-11.
[12]	ZHANG Shuqing, BI Shusheng, ZHAO Hongzhe, ZONG Guanghua, LIU Lang. Application Study and Performance Testing of Cross-spring Flexible Hooke Hinge in Static Balancing Instrument [J]. Journal of Mechanical Engineering, 2015, 51(21): 1-6.
[13]	YANG Qizi, LIU Lang, BI Shusheng, ZHAO Hongzhe. Rotational Stiffness Characterization of Generalized Triple-cross-spring Flexure Pivots [J]. Journal of Mechanical Engineering, 2015, 51(13): 189-195.
[14]	LIU Dong; ZHU Jian; ZHU Fangneng; YANG Xiaoyong; KIM Hyoungbum. Effect of Slit Number on the Stability of Taylor Vortex Flow [J]. , 2014, 50(22): 186-191.
[15]	ZHOU Xu;ZHANG Dinghua;WU Baohai;LUO Ming. General Method of Post-processing for Non-orthogonal Five-axis Machine Tools with Dual Rotary Tables [J]. , 2014, 50(15): 198-204.

ALGORITHM FOR AUTOMATICA-LLY DETECTING SPURIOUS VECTORS IN PIV DATA

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments