DEVELOPMENT OF A NEW KIND OF VIBRATION DAMPER FOR MACHINE TOOL SPINDLES

›› 1992, Vol. 28 ›› Issue (3): 71-75.

• Article • Previous Articles Next Articles

DEVELOPMENT OF A NEW KIND OF VIBRATION DAMPER FOR MACHINE TOOL SPINDLES

Shen Cheng;Jiang Chun

Zhejiang University

Published:1992-05-01

Abstract

Abstract: A new kind of machine tool spindle structure of high damping is presented in this paper and its dynamic behaviour was studied. It was verified by experiment that the dynamic behaviour of this spindle structure is greatly improved because o adding damping rings on the bearing point of machine tool spindle.

Key words: 机床, 主轴, 阻尼减振, Bending, Plastic hardening material, Steel plate, Straightening, Stress

Shen Cheng;Jiang Chun. DEVELOPMENT OF A NEW KIND OF VIBRATION DAMPER FOR MACHINE TOOL SPINDLES[J]. , 1992, 28(3): 71-75.

[1]	CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan. Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC [J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.
[2]	WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming. Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling [J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
[3]	ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun. Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU [J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
[4]	ZHOU Tian, CAI Lixun, HAN Guangzhao. Novel Flat-SPT Method for Obtaining Mechanical Properties of Ductile Materials and Its Application [J]. Journal of Mechanical Engineering, 2024, 60(4): 316-325.
[5]	HU Long, LIU Hongyan, CHENG Huimei, CHEN Weiqi, FENG Guangjie, YE Yanhong, DENG Dean. Study on Residual Stress of Multi-layer and Multi-pass Butt-welded Joint for Ultra-high Strength Wear-resistant Steel NM500 [J]. Journal of Mechanical Engineering, 2024, 60(4): 335-344.
[6]	LI Ying, ZHANG Jiafang, ZHANG Zhaoyong, WANG Xincheng, ZHANG Jin, KONG Xiangdong. Design of Minimum Diameter of Piston Neck in Swashplate Axial Piston Pump [J]. Journal of Mechanical Engineering, 2024, 60(4): 430-437.
[7]	LIU Huaiju, CHEN Difa, ZHU Caichao, WU Jizan, WEI Peitang. State-of-art and Trend of Gear Bending Fatigue Studies [J]. Journal of Mechanical Engineering, 2024, 60(3): 83-108.
[8]	MA Yongtao, SUN Ning, WANG Junlong, LI Chunfan, LU Chunsheng, ZHANG Bin, LIU Lanrong. Calculation of Shot Peening Coverage of Pre-mixed Jet and its Influence on the Surface Integrity of Carburized Steel [J]. Journal of Mechanical Engineering, 2024, 60(3): 393-404.
[9]	GAO Sheng, WU Jianjun, YAN Jing, ZHANG Rongxia, YU Zhongping, LIU Long. Prediction of Buckling and Deformation Law of Pipe Fittings under Free Bending Based on Energy Method [J]. Journal of Mechanical Engineering, 2024, 60(20): 162-172.
[10]	JIAO Jingpin, SUN Yandong, LI Guanghai, ZHAO Pengjing, WU Bin, HE Cunfu. Sparse Representation of Acoustic Emission Signals for Identifying Tensile Process of Aluminum Alloy Sheets [J]. Journal of Mechanical Engineering, 2024, 60(2): 1-9.
[11]	CAO Jing, YAO Weixing, LIANG Deli, WANG Binwen. SSF Method for Fatigue Analysis of Mechanically Fastened Hybrid-material Structures at Different Temperatures [J]. Journal of Mechanical Engineering, 2024, 60(18): 138-145.
[12]	ZHAO Junlin, QIAO Baijie, LUO Xianqiang, FU Shunguo, CHENG Hao, WANG Yanan, CHEN Xuefeng. Single-sensor-based Prediction of Blade Multimodal Dynamic Stress Field Variation [J]. Journal of Mechanical Engineering, 2024, 60(16): 19-33.
[13]	ZHAO Lei, ZHANG Libin, SONG Kai, XU Lianyong, HAN Yongdian, HAO Kangda. Research on Creep-fatigue Cyclic Deformation of New Martensitic Heat Resistant Steel [J]. Journal of Mechanical Engineering, 2024, 60(16): 118-129.
[14]	SHANG Jianqin, TIAN Shuo, GAI Pengtao, CHEN Fulong, ZENG Yuansong. Integrally-stiffened Panel Stretch-bending Stress Peen Forming Technology and Its Application [J]. Journal of Mechanical Engineering, 2024, 60(14): 97-108.
[15]	HE Weilin, MENG Bao, WAN Min. Study on U-bending Springback Behavior of GH4169 Ultrathin Strip [J]. Journal of Mechanical Engineering, 2024, 60(14): 174-184.

DEVELOPMENT OF A NEW KIND OF VIBRATION DAMPER FOR MACHINE TOOL SPINDLES

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments