THE ADJUSTMENT OF THE KINEMATIC ERRORS OF CRANK-SLIDE MECHANISM

Abstract

Abstract: Using the result; obtained by the author in an earlier paper that the acceleration error of the output link of crank-slide mechanism may ho eliminated if the length-errors of bars satisfy the following equations: (1) due to upper dead center η=Δl2/(λ2Δl1)-2/-1;(2) due to lower dead centerη=Δl2/(λ2Δl1)-2/λ+1, hereη=Δj/(Δl2 a12) is called acceleration error factor, λ is the ratio of length of crank and connecting rod. The angular acceleration error of connecting rod due to both dead centers is eliminated if the following relationship is satisfied.

Key words: chatter, hydraulic pressure control, integrated-electro-hydraulic brake system

TSAO WEICHING. THE ADJUSTMENT OF THE KINEMATIC ERRORS OF CRANK-SLIDE MECHANISM[J]. , 1958, 6(2): 133-138.

[1]	LIU Kuo, JIANG Yeming, HUANG Renjie, LI Mingyu, CHEN Hu, WANG Yongqing. Research on High-efficiency Adaptive Machining Technology of Machine Tools Considering Online Chatter Suppression [J]. Journal of Mechanical Engineering, 2024, 60(6): 104-113.
[2]	LI Chao, ZHANG Jun, TIAN Hui, ZHAO Wanhua. Timely Chatter Detecting Method in Milling with Integrated Energy Ratio and Amplitude Standard Deviation of Vibration Signal [J]. Journal of Mechanical Engineering, 2024, 60(14): 11-23.
[3]	TAN Zhipu, QIN Guohua, LOU Weida, WU Zhuxi. High Precision Judgement Method for Milling Stability Based on Bernoulli Distribution and Hybrid Drive Model [J]. Journal of Mechanical Engineering, 2024, 60(11): 318-331.
[4]	SUN Zhaoyang, PENG Fangyu, TANG Xiaowei, YAN Rong, XIN Shihao, WU Jiawei. Robotic Milling Chatter Types Detection Based on Adaptive VariationalMode Decomposition and Difference of Power Spectral Entropy [J]. Journal of Mechanical Engineering, 2023, 59(9): 90-100.
[5]	WANG Xiaoyong, GAO Zhiying, XIN Yanli. Identification and Forecast of Cold Rolling Chatter Based on Recurrence Quantification Analysis [J]. Journal of Mechanical Engineering, 2023, 59(9): 137-145.
[6]	ZHU Zijun, ZHU Xianglong, DONG Zhigang, KANG Renke, BAO Yan. A Review of Research on Chatter Stability of Grinding Processes [J]. Journal of Mechanical Engineering, 2023, 59(21): 15-33.
[7]	LOU Weida, QIN Guohua, WANG Huamin, WU Zhuxi. Multi-objective Optimization Method of Stable Milling Process Parameters Based on BP Neural Network and Composite Cotes Integration [J]. Journal of Mechanical Engineering, 2023, 59(17): 279-290.
[8]	LIU Jianing, CAO Hongrui, YAN Penghui, JI Wenchen. Deep Transfer Learning Method and Its Application in Grinding Chatter Marks Identification under Variable Working Conditions [J]. Journal of Mechanical Engineering, 2023, 59(16): 128-136.
[9]	LIU Chunjing, TANG Dunbing, CHEN Xingqiang, WEI Tianlu. Research on Stability of Milling System Based on Updated Complete Discretization Method [J]. Journal of Mechanical Engineering, 2023, 59(15): 162-173.
[10]	ZHANG Lei, ZHENG Kan, SUN Lianjun, SUN Hongwei, XUE Feng, WANG Tao. Investigation on Chatter Monitoring of Composite Milling Edge Based on the Selection of Sensitive Frequency Band of Wavelet Packet [J]. Journal of Mechanical Engineering, 2022, 58(3): 140-148.
[11]	YE Songtao, YAN Sijie, LI Wentao, XU Xiaohu, LU Jialin. Analysis of Tool Tip Dynamic Characteristics and Stability Prediction for Robotic Milling Tasks [J]. Journal of Mechanical Engineering, 2022, 58(17): 261-275.
[12]	WANG Zhixue, LIU Xianli, LI Maoyue, WANG Lihui, Steven Y. LIANG, YU Fuhang. Multi-point Contact Stability Prediction Considering Force-induced Deformation Effect in Milling Thin-Walled Parts [J]. Journal of Mechanical Engineering, 2022, 58(17): 309-320.
[13]	CHEN Yun, HOU Liang, LIU Wenzhi, BU Xiangjian. Chatter Stability Prediction in Low Immersion Milling Based on Time-domain Simulation [J]. Journal of Mechanical Engineering, 2021, 57(3): 98-106.
[14]	LIU Tao, DENG Zhaohui, LUO Chengyao, Lü Lishu, LI Zhongyang, WAN Linlin. Stability Modeling and Analysis of Non-circular High-speed Grinding with Consideration of Dynamic Grinding Depth [J]. Journal of Mechanical Engineering, 2021, 57(15): 264-274.
[15]	CAO Hongrui, LI Denghui, LIU Jinxin, ZHANG Xingwu, CHEN Xuefeng. Research on Fuzzy Control for High Speed Milling Chatter of Intelligent Spindle [J]. Journal of Mechanical Engineering, 2021, 57(13): 55-62.

THE ADJUSTMENT OF THE KINEMATIC ERRORS OF CRANK-SLIDE MECHANISM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments