| [1] |
FENG Yong, ZHOU Haojie, ZHOU Zhiyuan, JIA Xiaolin, QIN Yuyan, XU Weiwei.
Research on Cutting Force Model of Low-frequency Torsional Vibration Assisted Helical Milling
[J]. Journal of Mechanical Engineering, 2024, 60(5): 390-402.
|
| [2] |
HE Chunlei, WANG Shuqi, LI Dongyang, GENG Kun, CHEN Guang, REN Chengzu.
Research Progress on the Influence of Crystalline Grain in Ultra-precision Cutting of Polycrystalline Material
[J]. Journal of Mechanical Engineering, 2024, 60(3): 373-392.
|
| [3] |
DU Yuchao, LIANG Zhiqiang, WANG Fei, LI Juan, LIU Yuehong, ZHAO Xu, SU Zhipeng, MA Yue, CHEN Rui, WANG Xibin.
Research on Cutting Force Modeling and Cutting Performance of PCD Micro Milling-grinding Combined Machining Tool
[J]. Journal of Mechanical Engineering, 2024, 60(19): 298-309.
|
| [4] |
HUANG Jingshan, LIU Guoliang, SUN Hao, YAO Bin, JIN Lin, CHEN Binqiang, CAO Xincheng, WANG Shancheng, XU Hao, CAI Zhiqin.
Effect of C60 Nanoparticle Cutting Fluid on Cutting Characteristics of 15Cr14Co12Mo5Ni2WA Gear Steel
[J]. Journal of Mechanical Engineering, 2023, 59(23): 358-371.
|
| [5] |
PENG Xiaoqiang, LI Huang, WANG Yueming, GUAN Chaoliang, HU Hao, LAI Tao, XU Chao.
Ultra-precision Cutting Characteristics of Convex Blazed Gratings with Electroless NiP
[J]. Journal of Mechanical Engineering, 2023, 59(21): 121-130.
|
| [6] |
CAO Chao, ZHAO Jiyun, LI Guilin, DING Haigang, KANG Jianhong, HAN Jing.
Matching Design Method for Exit Parameters of Medical Waterjet Generating Device
[J]. Journal of Mechanical Engineering, 2022, 58(12): 293-300.
|
| [7] |
ZHANG Yang, WU Baohai, XIA Weihong, ZHANG Ying, ZHAO Jing.
Multi-objective Feed Optimization with Constant Cutting Force Constraints under Variable Cutting Depth
[J]. Journal of Mechanical Engineering, 2021, 57(5): 242-250.
|
| [8] |
CHEN Yun, HOU Liang, LIU Wenzhi, BU Xiangjian.
Chatter Stability Prediction in Low Immersion Milling Based on Time-domain Simulation
[J]. Journal of Mechanical Engineering, 2021, 57(3): 98-106.
|
| [9] |
DING Feng, WANG Chengyong, LAI Zijian, ZHANG Tao, ZHU Xuguang, GAO Kuan.
Freezing Cutting Characteristics and Non-crystallized Processing Technology of Zr-based Bulk Metallic Glass
[J]. Journal of Mechanical Engineering, 2021, 57(3): 235-246.
|
| [10] |
LIU Qiang, ZHANG Haijun, LIU Xianli, GAO Dayong, ZHANG Mingjian.
A Review of Research on Intelligent Cutting Tools
[J]. Journal of Mechanical Engineering, 2021, 57(21): 248-268.
|
| [11] |
FENG Yong, WANG Xiaoyu, XU Zhenqin, JI Fuhua, WANG Haoxiang.
Research on Cutting Force Model of Diamond Wire Saw with Single Crystal Silicon Swing
[J]. Journal of Mechanical Engineering, 2021, 57(19): 260-272.
|
| [12] |
WANG Chengyong, CHEN Zhihua, CHEN Huawei, SONG Qinghua, REN Yinghui, SUI Jianbo, SHU Liming, CHEN Bin, ZHENG Lijuan.
A Review on Cutting Mechanism for Bone Material
[J]. Journal of Mechanical Engineering, 2021, 57(11): 2-32.
|
| [13] |
WANG Linze, GAO Dedong, BAI Huiquan, ZHAO Yan, CUI Jiali, LI Murong, LEI Yong.
Trajectory Prediction of Bevel-Tip Flexible Needle Based on Force and Vision Perception
[J]. Journal of Mechanical Engineering, 2021, 57(11): 52-60.
|
| [14] |
NI Chenbing, ZHU Lida, NING Jinsheng, YANG Zhichao, LIU Changfu.
Research on the Characteristics of Cutting Force Signal and Chip in Ultrasonic Vibration-assisted Milling of Titanium Alloys
[J]. Journal of Mechanical Engineering, 2019, 55(7): 207-216.
|
| [15] |
ZHAO You, GE Xiaohui, ZHAO Yulong.
Research on High Precision Dynamic Cutting Force Self-perception Intelligent Tool
[J]. Journal of Mechanical Engineering, 2019, 55(21): 178-185.
|
