DYNAMIC COLLABORATION’S ESTABLISHING PROCESS－MODEL AND ANALYSIS

Abstract

Abstract: The main concern is the model of dynamic collaboration’s constructing process. A tool - general product dependent relation diagram (GPDRD) is put forward, the mathematical model of dynamic collaboration’s establishing process is constructed by it. At the same time, several possible modes of dynamic collaboration’s construction are consulted, the advantages and shortcomings of each mode are pointed out as well.

Key words: General product dependent relation, Constructing plan, diagram, Dynamic collaboration, General product

CLC Number:

TP14

Jiang Guichuan;Fan Yushun;Wu Cheng. DYNAMIC COLLABORATION’S ESTABLISHING PROCESS－MODEL AND ANALYSIS[J]. , 2002, 38(1): 58-62.

[1]	TAN Zhipu, QIN Guohua, LOU Weida, WU Zhuxi. High Precision Judgement Method for Milling Stability Based on Bernoulli Distribution and Hybrid Drive Model [J]. Journal of Mechanical Engineering, 2024, 60(11): 318-331.
[2]	LOU Weida, QIN Guohua, WANG Huamin, WU Zhuxi. Multi-objective Optimization Method of Stable Milling Process Parameters Based on BP Neural Network and Composite Cotes Integration [J]. Journal of Mechanical Engineering, 2023, 59(17): 279-290.
[3]	LIU Chunjing, TANG Dunbing, CHEN Xingqiang, WEI Tianlu. Research on Stability of Milling System Based on Updated Complete Discretization Method [J]. Journal of Mechanical Engineering, 2023, 59(15): 162-173.
[4]	XU Mengyu, YI Qian, SHAN Yuzhong, XIONG Shiquan, CAO Huajun, YI Shuping. Collaborative Quality Value Modeling for Intelligent Manufacturing of Nuclear Power Equipment Based on System Dynamic Flow Diagram [J]. Journal of Mechanical Engineering, 2022, 58(12): 270-282.
[5]	DU Bing, ZHAO Chonghao, XIE Jun, LI Han, ZHAO Changcai, DU Zhiming. Influence of Stress Loading Path on the Limit of Plastic Wrinkling and Instability of Plates and Shells [J]. Journal of Mechanical Engineering, 2021, 57(4): 83-91.
[6]	XIE Qi, WANG Na, YANG Yajing, DUAN Bin, MA Dezhi, YOU Yiliang, WU Sujun. Detection and Evaluation of Welded Joints of Steel Structures with Defects [J]. Journal of Mechanical Engineering, 2021, 57(24): 223-232.
[7]	ZHANG Qian, SHAN Zhongde, WU Le, WANG Shaozong, TIAN Yuan. Research and Application of Mathematical Model of Ship Sectional Multi-station Cooperative Manufacturing System [J]. Journal of Mechanical Engineering, 2020, 56(9): 191-198.
[8]	WU Shengchuan, XIE Cheng, HU Yanan, WU Zhengkai, KANG Guozheng. Defect Tolerance Assessment Method of Fusion Welded Medium and High Strength Al Alloy Joints [J]. Journal of Mechanical Engineering, 2020, 56(8): 46-59.
[9]	LU Wenjuan, WU Huafang, LIU Tianlu, ZENG Daxing. Topology and Motion Diagram of the Third-order Cube Mechanism [J]. Journal of Mechanical Engineering, 2020, 56(23): 89-97.
[10]	FENG Changqing, ZHAO Wei, SUN Yuan, AN Jian. High Temperature Wear Behavior of Mg97Zn1Y2 Magnesium Alloy [J]. Journal of Mechanical Engineering, 2019, 55(24): 66-71.
[11]	HUANG Hao, WU Huagen, YING Wen, ZHANG Beiyu, LIN Kanlong, XIONG Baoshun. Research on Characteristics of Twin-screw Refrigeration Compressor [J]. Journal of Mechanical Engineering, 2019, 55(24): 197-202.
[12]	YANG Zhuoyun, ZHAO Changcai, DONG Guojiang, CHEN Guang, ZHU Liangjin, DU Bing. Forming Limit Research of 5182 Aluminum Alloy Sheet Based on Lou-2013 Ductile Fracture Criterion [J]. Journal of Mechanical Engineering, 2019, 55(16): 47-57.
[13]	DAI Yuebang, WEI Zhaocheng, LI Hongkun, ZHANG Mengzhe. Research on Prediction Method of Stability Lobe Diagram for Ball-end Mill Based on Engagement [J]. Journal of Mechanical Engineering, 2019, 55(1): 52-61.
[14]	WANG Xiaohui, SONG Fangjie, HUO Guojun, WANG Youli. A New Method for Determining the Dimension Datum of Plane Blanks Based on Shortest Path [J]. Journal of Mechanical Engineering, 2019, 55(1): 172-179.
[15]	ZHANG Yongxiang, LIU Xin, CHU Zhigang, HUANG Di, WANG Guangjian. Autonomous Modal Parameter Extraction Based on Stochastic Subspace Identification [J]. Journal of Mechanical Engineering, 2018, 54(9): 187-194.

DYNAMIC COLLABORATION’S ESTABLISHING PROCESS－MODEL AND ANALYSIS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments