Research and Practice of KBOM-based Pull Collaborative Platform in Aerospace Manufacturing

doi:10.3901/JME.260231

Abstract

Abstract: The aerospace large-scale complex equipment products have diverse types and high complexity. The existing scientific research and production mode focuses on vertical integration, trial production and batch production mixed line production, which leads to difficulties in horizontal collaboration and insufficient batch production capacity. By analyzing the characteristics of mixed line production and final assembly of aerospace equipment products, based on the manufacturing model driven by aerospace final assembly, a unified data model, collaborative mechanism, and standard specifications are established to build a cross enterprise, horizontally penetrating unified collaborative platform for final assembly plants, component factories, and raw material factories. General assembly plants at all levels rely on collaborative platforms to release a complete set of KBOM (kitting BOM) for final assembly. Supporting plants use the collaborative platform to associate and deliver multi-dimensional data such as physical objects, product certificates, QR codes, etc., and use digital pull dashboards to display real-time panoramic data of the entire chain of supporting plants. Explore key technologies such as the technical architecture and security protection of a collaborative platform for aerospace equipment research and production based on cross heterogeneous networks, data standards and routing transmission mechanisms based on heterogeneous collaborative scenarios, and model-based lightweight transmission and parsing mechanisms for a complete collaborative environment, forming a aerospace “main supply collaboration” model with multi-level assembly plants as the fulcrum of the industry chain. Carry out application practices in typical aerospace assembly plants, component plants, and parts factories, streamline the open and collaborative aerospace manufacturing industry chain characterized by lean, digital, networked, and intelligent processes, enhance the overall management level of the supply chain, and promote collaborative innovation and ecological development of the pull production industry chain.

Key words: large and complex aerospace equipment, final assembly pull, kitting Bom, collaborative platform, complete product set, digital Pull Kanban

CLC Number:

TG156

WANG Guodong, LIU Jingtao, ZHAO Qin, WANG Hongjun. Research and Practice of KBOM-based Pull Collaborative Platform in Aerospace Manufacturing[J]. Journal of Mechanical Engineering, 2026, 62(5): 100-116.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.260231

http://www.cjmenet.com.cn/EN/Y2026/V62/I5/100

References

[1] 黄建明. 网络协同制造系统的研发与探讨[J]. 甘肃科技，2015，31(8):15-17. HUANG Jianming. Research and exploration of network collaborative manufacturing system[J]. Gansu Science and Technology，2015，31(8):15-17.
[2] 杨叔子，吴波. 先进制造技术及其发展趋势[J]. 机械工程学报，2003(10):73-78. YANG Shuzi，WU Bo. Advanced manufacturing technology and its development trends[J]. Journal of Mechanical Engineering，2003(10):73-78.
[3] 刘飞，雷琦，宋豫川. 网络化制造的内涵及研究发展趋势[J]. 机械工程学报，2003(8):1-6. LIU Fei, LEI Qi, SONG Yuchuan. The connotation and research development trend of networked manufacturing[J]. Journal of Mechanical Engineering，2003(8):1-6.
[4] 王海龙，赵芸芸，张昕嫱. 从西飞公司看网络化协同制造模式[J]. 中国工业评论，2017(8):86-90. WANG Hailong，ZHAO Yunyun，ZHANG Xinqiang. Viewing the networked collaborative manufacturing model from Xifei company[J]. China Industrial Review，2017(8):86-90.
[5] 王磊. 典型区域性网络化协同设计制造平台系统研究[J]. 中国机械工程，2004(19):70-76. WANG Lei. Research on Typical regional networked collaborative design and manufacturing platform system[J]. China Mechanical Engineering，2004(19):70-76.
[6] 丁涛，王芳. 网络化协同设计制造研究现状及进展[J]. 石油化工设备，2011，40(3):41-44. DING Tao，WANG Fang. Research status and progress of networked collaborative design and manufacturing[J]. Petrochemical equipment，2011，40(3):41-44.
[7] 王军强，张翠琳，孙树栋，等. MRPII、JIT、TOC生产计划与控制比较研究[J]. 制造业自动化，2005(2):9-13. WANG Junqiang，ZHANG Cuilin，SUN Shudong，et al. Comparative study on production planning and control of MRPII，JIT，and TOC[J]. Manufacturing Automation，2005(2):9-13.
[8] 韩凤宇，林益明，范海涛，等. 基于模型的系统工程在航天器研制中的研究与实践[J]. 航天器工程，2014，23(3):1-7. HAN Fengyu，LIN Yiming，FAN Haitao，et al. Research and practice of model based systems engineering in spacecraft development[J]. Spacecraft Engineering，2014，23(3):1-7.
[9] 余后满，郝文宇，袁俊刚，等. 航天器系统工程技术发展思路[J]. 航天器工程，2009，18(1):1-7. YU Houman，HAO Wenyu，YUAN Jungang，et al. Development schemes of spacecraft system engineering techniques[J]. Spacecraft Engineering，2009，18(1): 1-7.
[10] 隋少春，许艾明，黎小华，等. 面向航空智能制造的DT与AI融合应用[J]. 航空学报，2020，41:7-17. SUI Shaochun，XU Aiming，LI Xiaohua，et al. Fusion application of DT and AI for aviation intelligent manufacturing[J]. Acta Aeron Astron Sin，2020，41:7-17.
[11] 李晋，崔南方，丁留明. 基于分类管理的汽车服务备件库存结构优化物流技术[J]. 物流技术，2006，8:73-75. LI Jin，CUI Nanfang，DING Liuming. Logistics technology for optimizing inventory structure of automotive service spare parts based on classification management[J]. Logistics Technology，2006，8:73-75.