• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 196-206.doi: 10.3901/JME.260659

Previous Articles    

Compatibility of Wheel Profile and Suspension System in High-speed EMU

GUO Tao1,2, GUAN Qinghua3, JING Chenxin3, LIANG Shulin3, CHEN Bingzhi1,   

  1. 1. Zhan Tianyou College (CRRC College), Dalian Jiaotong University, Dalian 116028;
    2. CRRC Tangshan Co., Ltd., Tangshan 064000;
    3. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031
  • Received:2025-08-15 Revised:2026-02-20 Published:2026-10-14

Abstract: Based on the hunting models and the rock and roll model of vehicle system, both the stability characteristics of vehicle systems with different wheelset positioning stiffness and the interacting mechanism of hunting motion and carbody vibration are investigated. Field tracking test on the wear of three wheel profiles used in a platform of high-speed EMUs in China is carried out to analyze their wear distribution features, and to compare the evolution laws of the equivalent conicities of the three profiles matched with 60 and 60N rail profiles respectively. Based on the investigation on the stability of vehicle systems with flexible and rigid wheelset positioning, the influencing mechanism of positioning stiffness on the distribution of the stability regions of vehicle system is disclosed. The research indicates that, for a bogie with flexible suspended wheelset and low-conicity wheel profile, the main unstable region is the hunting at high speed due to the increased conicity. While for a bogie with large positioning stiffness and large wheel conicity, there are two unstable regions. The first is carbody hunting at low speed due to too low conicity, and the other is bogie hunting at high speed due to too large conicity. For the contact between worn wheel profile A and 60 rail profile, large equivalent conicity will be generated, it’s urgent to control the upper boundary of equivalent conicity to avoid bogie hunting. While for the new B and C profiles matched with 60N rail profile, low conicity may occur, special care should be taken to the lower boundary of equivalent conicity to avoid carbody hunting. The research can provide scientific support for the compatibility design and the operational management of suspension system and wheel tread in high-speed EMUs.

Key words: electric multiple unit, wheel profile, suspension system, hunting stability, carbody vibration

CLC Number: