Experimental Study on Power Generation Performance of Bending Piezoelectric-electromagnetic Coupling Energy Harvester

doi:10.3901/JME.2024.22.457

Abstract

Abstract: The bending beam has nonlinear and other mechanical properties. Combining the bending beam with piezoelectric theory can better solve the problems of low output power, large required excitation acceleration and narrow energy scavenge frequency band of a single linear energy scavenge system. Therefore, a bending piezoelectric electromagnetic coupling energy harvester is proposed. The device consists of three bending beams, magnets and coils. The power generation performance of the energy harvester is tested by building an experimental prototype to explore the influence of various factors on the system output power. The results show that the output performance of the system is better when the piezoelectric chip is located on the bent lower beam than on the bent upper beam. The optimal matching resistance of the device maximizes the output power of the system. The optimal electromagnetic and piezoelectric resistances are about 150 Ω and 80 kΩ, respectively. The introduction of magnetic repulsion force increases the output voltage and output power of the energy scavenge system. The electromagnetic output power with magnetic repulsion is 123.1% higher than that without magnetic repulsion, and the piezoelectric output power with magnetic repulsion is 41.8% higher than that without magnetic repulsion. The maximum output power of the system is 0.46 mW when the excitation acceleration is 0.1g, and 1.36 mW when the excitation acceleration is 0.3g. The increase of the excitation acceleration significantly increases the output power of the system, broadens the energy scavenge band of the system, and improves the power generation performance of the harvester.

Key words: vibration energy, bent beam, piezoelectric-electromagnetic coupling, energy harvesting, broadband

CLC Number:

TH39
TH113

ZHAO Qingling, LIU Shiyu, SHEN Hui, ZHANG Leian, ZHANG Huaqiang, SONG Rujun. Experimental Study on Power Generation Performance of Bending Piezoelectric-electromagnetic Coupling Energy Harvester[J]. Journal of Mechanical Engineering, 2024, 60(22): 457-464.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.22.457

http://www.cjmenet.com.cn/EN/Y2024/V60/I22/457

References

[1] LI X，LI Z，LIU B，et al. Numerical research on a vortex shedding induced piezoelectric-electromagnetic energy harvester[J]. Journal of Intelligent Material Systems and Structures，2021，33(1)：105-120.
[2] 侯成伟，单小彪，宋汝君. 风向自适应型涡激振动压电俘能器的试验研究[J]. 机械工程学报，2022，58(20)：120-127. HOU Chengwei，SHAN Xiaobiao，SONG Rujun，et al. Experimental study of orientation adaptive piezoelectric energy harvester based on vortex induced vibration[J]. Journal of Mechanical Engineering，2022，58(20)：120-127.
[3] CHEN Y，GU C，CHEN W，et al. A novel hybrid piezoelectric-electromagnetic micro-power generator by harvesting low frequency acoustic energy[J]. Earth and Environmental Science，2020，617：012048.
[4] ZHOU S，ZUO L. Nonlinear dynamic analysis of asymmetric tristable energy harvesters for enhanced energy harvesting[J]. Commun. Nonlinear Sci. Numer. Simulat.，2018，61：271-284.
[5] HE W，ZHANG J，YUAN S，et al. A three-dimensional magneto-electric vibration energy harvester based on magnetic levitation[J]. IEEE Magnetics Letters，2017，8：6104703.
[6] ZHOU J，ZHAO X，WANG K，et al. Bio-inspired bistable piezoelectric vibration energy harvester：Design and experimental investigation[J]. Energy，2021，228：11-19.
[7] YUN Y，CAI T，XUE S，et al. High performance hybrid piezoelectric-electromagnetic energy harvester for scavenging energy from low-frequency vibration excitation[J]. IEEE Access，2020，8：206503-206513.
[8] 亓有超，赵俊青，张弛. 微纳振动能量收集器研究现状与展望[J]. 机械工程学报，2020，56(13)：1-15. QI Youchao，ZHAO Junqing，ZHANG Chi. Review and prospect of micro-nano vibration energy harvesters[J]. Journal of Mechanical Engineering，2020，56(13)：1-15.
[9] JUNG I，CHOI J，PARK H，et al. Design principles for coupled piezoelectric and electromagnetic hybrid energy harvesters for autonomous sensor systems[J]. Nano Energy，2020(1)：1-11.
[10] ZHONG Y，WANG J，ZHENG T，et al. Homogeneous hypermonotectic alloy fabricated by electric-mag- netic-compound field assisting solidification[J]. Material- stoday：Proceedings，2015，2(Suppl.2)：364-372.
[11] LIU H，GAO S，WU J，et al. Study on the output performance of a nonlinear hybrid piezoelectric- electromagnetic harvester under harmonic excitation[J]. Acoustics，2019(1)：382-392.
[12] CHEN Y，GU C，CHEN W，et al. A novel hybrid piezoelectric-electromagnetic micro-power generator by harvesting low frequency acoustic energy[J]. The Electrochemical Society，2020，617：012048.
[13] MA X，LI H，ZHOU S，et al. Characterizing nonlinear characteristics of asymmetric tristable energy harvesters[J]. Mechanical Systems and Signal Processing，2022，168(1)：108612.
[14] LI K，YANG Z，ZHOU S. Performance enhancement for a magnetic-coupled bi-stable flutter-based energy harvester[J]. Smart Materials and Structures，2020，29(8)：1-17.
[15] ZHOU S，ZUO L. Nonlinear dynamic analysis of asymmetric tristable energy harvesters for enhanced energy harvesting[J]. Communications in Nonlinear Science and Numerical Simulation，2018，61：271-284.
[16] 董新博，刘海鹏，陈林雄，等. 双端磁耦合式压电振动俘能器结构设计[J]. 压电与声光，2017，39(5)：711-716. DONG Xinbo，LIU Haipeng，CHEN Linxiong，et al. Structrue design of piezomagnetoelastic energy harvester based on double cantilever vibration[J]. Piezoelectrics & Acoustooptics，2017，39(5)：711-716.
[17] 桑英军，滕藤，曹阳，等. 电磁与压电复合式振动能量收集系统研究[J]. 首都师范大学学报，2022，43(3)：17-24. SANG Yingjun，TENG Teng，CAO Yang，et al. Research on electromagnetic and piezoelectric hybrid vibration energy harvesting system[J]. Journal of Capital Normal University，2022，43(3)：17-24.
[18] FERRARI M，FERRARI V，GUIZZETTI M，et al. Improved energy harvesting from wideband vibrations by nonlinear piezoelectric converters[J]. Sensors and Actuators A：Physical，2015，162：425-431.
[19] HOU C，LI C，SHAN X，et al. A broadband piezoelectromagnetic hybrid energy harvester under combined vortex-induced and base excitations[J]. Mechanical Systems and Signal Processing，2022，171：108963.
[20] SHAN X，LI H，YANG Y，et al. Enhancing the performance of an underwater piezoelectric energy harvester based on flow-induced vibration[J]. Energy，2019，172：134-140.
[21] WANG G，LIAO W，YANG B，et al. Dynamic and energetic characteristics of a bistable piezoelectric vibration energy harvester with an elastic magnifier[J]. Mechanical Systems and Signal Processing，2018，105：427-446.
[22] PASHARAVESH A，DALIR H. Flexural modes coupling in cantilever-type piezoelectric energy harvesters[J]. Energy Reports，2021，7：6438-6450.
[23] LI J，WANG G，YANG P，et al. An orientation-adaptive electromagnetic energy harvester scavenging for wind-induced vibration[J]. Energy，2024，286：129578.