Co-optimization Design of Flexible Parallel Multi-axis Force Sensors

doi:10.3901/JME.2024.19.020

Abstract

Abstract: Aiming at the elastic-body structure of multi-axis force sensors with variable-section, irregular or nonanalytic flexible units, these units will make the strain analytical model of sensors difficult to construct, which further brings some difficulties in aspects of structural optimization and performance evaluation of sensors.Based on the collaborative interaction between Matlab and ANSYS software, an optimization design method suitable for flexible parallel multi-axis force sensors with complex elastic-body structure is proposed.Utilizing the linear elastic-beam theory, the general overall-stiffness and force-mapping analytical models of cross-beam multi-axis force sensors are established.By considering the measuring chains with nonanalytic floating-beam structure and bridge connection schemes, the analytical strain-load relations of the cross-beam sensors including the floating-beam structures with four-edges or two-sides clamped support are deduced.The correctness of the analytical models is validated by combining examples of cross-beam sensors with finite-element and experimental results.The collaborative optimization design results show that the condition number for the normalized strain compliance matrix of cross-beam sensors after optimization tends to 1 under given constraints, and meanwhile the high measurement sensitivity, low cross-coupling and isotropy can be achieved.

Key words: multi-axis force sensor, flexible parallel, collaborative optimization, strain analysis, performance evaluation

CLC Number:

TP212

LI Lijian, YANG Penglin, YAO Jiantao, LI Bing, WANG Yingjia. Co-optimization Design of Flexible Parallel Multi-axis Force Sensors[J]. Journal of Mechanical Engineering, 2024, 60(19): 20-31.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.19.020

http://www.cjmenet.com.cn/EN/Y2024/V60/I19/20

References

[1] TEMPLEMAN J O，SHEIL B B，SUN T. Multi-axis force sensors：A state-of-the-art review[J]. Sensors and Actuators A：Physical，2020，304：111772.
[2] XU J D，PAN J，CUI T，et al. Recent progress of tactile and force sensors for human–machine interaction[J]. Sensors，2023，23(4)：1868.
[3] YUAN C，LUO L P，YUAN Q，et al. Development and evaluation of a compact 6-axis force/moment sensor with a serial structure for the humanoid robot foot[J]. Measurement，2015，70：110-122.
[4] LI T L，CHEN F Y，ZHAO Z B，et al. Hybrid data-driven optimization design of a layered six-dimensional fbg force/moment sensor with gravity self-compensation for orthopedic surgery robot[J]. IEEE Transactions on Industrial Electronics，2022，70(8)：8568-8579.
[5] XU J J，SONG A G. A miniature multiaxis force/torque sensor for acupuncture[J]. IEEE Sensors Journal，2023，23(7)：6660-6671.
[6] HE Z X，LIU T. Design of a three-dimensional capacitor-based six-axis force sensor for human-robot interaction[J]. Sensors and Actuators A：Physical，2021，331：112939.
[7] SUBAD R A S I，SAIKOT M M H，PARK K. Soft multi-directional force sensor for underwater robotic application[J]. Sensors，2022，22(10)：3850.
[8] CHAO L P，CHEN K T. Shape optimal design and force sensitivity evaluation of six-axis force sensors[J]. Sensors and Actuators A：Physical，1997，63(2)：105-112.
[9] HE Z X，LIU T. Isotropy Optimization of six-axis capacitive force sensor with a large moment-to-force ratio[J]. IEEE Transactions on Instrumentation and Measurement，2022，71：1-11.
[10] SONG A G，WU J，QIN G，et al. A novel self-decoupled four degree-of-freedom wrist force/torque sensor[J]. Measurement，2007，40(9-10)：883-891.
[11] NGUYEN D D，KUO C H. Design and optimization of a joint torque sensor for lightweight robots[J]. IEEE Sensors Journal，2021，21(8)：9788-9797.
[12] SUN Y J. Design，manufacture，test and experiment of six-axis force torque sensor for chinese experimental module manipulator[J]. Sensors，2022，22(9)：3603.
[13] MA J Q，SONG A G. Fast estimation of strains for cross-beams six-axis force/torque sensors by mechanical modeling[J]. Sensors，2013，13(5)：6669-6686.
[14] WANG Y J，ZUO G K，CHEN X L，et al. Strain analysis of six-axis force/torque sensors based on analytical method[J]. IEEE Sensors Journal，2017，17(14)：4394-4404.
[15] 左盟，陈伟球，杨明，等. Y形横梁六维力/力矩传感器的应变分析[J]. 机械工程学报，2020，56(12)：1-8. ZUO Meng，CHEN Weiqiu，YANG Ming，et al. Strain analysis of six-axis force/torque sensors with y-shaped crossbeam[J]. Journal of Mechanical Engineering，2020，56(12)：1-8.
[16] KANG M K，LEE S，KIM J H. Shape optimization of a mechanically decoupled six-axis force/torque sensor[J]. Sensors and Actuators A：Physical，2014，209：41-51.
[17] AKBARI H，KAZEROONI A. Improving the coupling errors of a Maltese cross-beams type six-axis force/moment sensor using numerical shape-optimization technique[J]. Measurement，2018，126：342-355.
[18] PHAM H H，CHEN I M. Stiffness modeling of flexure parallel mechanism[J]. Precision Engineering，2005，29(4)：467-478.
[19] 李立建，马爱霞，姚建涛，等. 柔性并联六维力传感器力映射解析研究[J]. 机械工程学报，2017，53(7)：30-38. LI Lijian，MA Aixia，YAO Jiantao，et al. Force mapping analytical research of flexure parallel six-axis force/torque sensor[J]. Journal of Mechanical Engineering，2017，53(7)：30-38.
[20] LOBONTIU N. Compliant mechanisms：Design of flexure hinges[M].Boca Raton：CRC Press，2003.
[21] 李立建，姚建涛，郭飞，等. 混合型柔性铰链构型设计与柔度建模[J]. 机械工程学报，2022，58(21)：78-91. LI Lijian，YAO Jiantao，GUO Fei，et al. Configuration design and compliance modeling of hybrid flexure hinges[J]. Journal of Mechanical Engineering，2022，58(21)：78-91.
[22] COWPER G R. The shear coefficient in Timoshenko’s beam theory[J]. Journal of Applied Mechanics，1966，33(2)：335-340.
[23] CHEN G M，HOWELL L L. Two general solutions of torsional compliance for variable rectangular cross-section hinges in compliant mechanisms[J]. Precision Engineering，2009，33(3)：268-274.
[24] KANG C G. Maximum structural error propagation of multi-axis force sensors[J]. JSME International Journal Series C Mechanical Systems，Machine Elements and Manufacturing，2001，44(3)：676-681.
[25] 梁桥康，成乐凯，龙建勇，等. 机器人多维力传感器[J]. 测控技术，2023，42(4)：1-8. LIANG Qiaokang，CHENG Lekai，LONG Jianyong，et al. Robotic multi-component force /torque sensors：A review[J]. Measurement & Control Technology，2023，42(4)：1-8.
[26] WU B Y，LUO J F，SHEN F，et al. Optimum design method of multi-axis force sensor integrated in humanoid robot foot system[J]. Measurement，2011，44(9)：1651-1660.
[27] KANG C G. Maximum structural error propagation of multi-axis force sensors[J]. JSME International Journal，2002，44(3)：676-681.
[28] FENG M，GONG Y L，HAN Z W，et al. Method of improving the sensitivity of large-range six-axis force/moment sensor using the principle of stress concentration[J]. Measurement，2022，199：111432.
[29] KIM G S，KANG D I，RHEE S H. Design and fabrication of a six-component force/moment sensor[J]. Sensors and Actuators A：Physical，1999，77(3)：209-220.
[30] HU S S，WANG H Y，WANG Y，et al. Design of a novel six-axis wrist force sensor[J]. Sensors，2018，18(9)：3120.