Speed Ratio Control Strategy of Wheel Loader with HMT Based on PTO Torque Estimation

doi:10.3901/JME.2024.18.362

Abstract

Abstract: Hydro-mechanical continuously variable transmission(HMT) has become one of the development directions of wheel loader transmission system, because of its ability to achieve high-power stepless speed changing and high-efficiency transmission. However, the resistance of the working device changes frequently during the operation, which will reduce the working efficiency and economy. To solve this problems, a ZL50 type wheel loader equipped with HMT is taken as the research object. The characteristics of HMT’s efficiency, torque and power flow are analyzed, and a Power take-off(PTO) torque estimation model is established with the key parameters such as hydraulic circuit pressure, engine speed, torque, etc. The influence of PTO torque on the target speed ratio is analyzed, a method to solve the target speed ratio considering PTO torque is proposed, and the speed ratio control strategy is formulated. In order to verify the effectiveness of this strategy, the V-type working cycle is constructed with reference to the typical operation cycle resistance and distance, and the simulation platform of the loader equipped with HMT is built in Matlab/Simulink. The results show that, the maximum error of the torque estimation is 9.18% except for transient conditions such as range changing; Compared with the traditional control strategy, the speed ratio control strategy based on PTO torque can increase the speed ratio, vehicle speed and engine load rate when the PTO demand torque is small; when the PTO torque demand becomes larger, it can reduce the speed ratio, distribute more power to the working system; the work efficiency is increased by 6.29% and the total fuel consumption is saved by 3.95% in a V-type working cycle.

Key words: loader, hydro-mechanical continuously variable transmission, power take-off, torque estimation, speed ratio adjustment

CLC Number:

U463

YANG Shujun, SHI Zhengxu, PENG Zengxiong, LI Xueliang, CHU Jiehao. Speed Ratio Control Strategy of Wheel Loader with HMT Based on PTO Torque Estimation[J]. Journal of Mechanical Engineering, 2024, 60(18): 362-373.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.18.362

http://www.cjmenet.com.cn/EN/Y2024/V60/I18/362

References

[1] XIA Guang，ZONG Huayu，TANG Xiwen，et al. Integrated control strategy of tractor hydromechanical continuously variable transmission[J]. Proceedings of the Institution of Mechanical Engineers，Part D：Journal of Automobile Engineering，2021，235(2-3)：649-671.
[2] WAN Lirong，DAI Hanzheng，ZENG Qingliang，et al. Characteristic analysis and co-validation of hydro-mechanical continuously variable transmission based on the wheel loader[J]. Applied Sciences，2020，10(17)：5900.
[3] NI Xiangdong，ZHU Sihong，OUYANG D，et al. Design and experiment of hydro-mechanical CVT speed ratio for tractor[J]. Transactions of the Chinese Society for Agricultural Machinery，2013，44(4)：15-20.
[4] YU Jin，CAO Zhu，CHENG Min，et al. Hydro-mechanical power split transmissions：Progress evolution and future trends[J]. Proceedings of the Institution of Mechanical Engineers，Part D：Journal of Automobile Engineering，2019，233(3)：727-739.
[5] 尤勇，孙冬野，刘俊龙，等. 基于动态规划的液力机械自动变速传动(HMPRT)自动换档控制策略[J]. 机械工程学报，2019，55(8)：106-117. YOU Yong，SUN Dongye，LIU Junlong，et al. Gearshift strategy for HMPRT base on dynamic programming[J]. Journal of Mechanical Engineering，2019，55(8)：106-117.
[6] 滑杨莹，夏光，唐希雯，等. 拖拉机液压机械式变速器小波神经网络PID控制[J]. 合肥工业大学学报，2020，43(1)：26-30，107. HUA Yangying，XIA Guang，TANG Xiwen，et al. Speed control method of tractor HMT based on wavelet neural network PID algorithm[J]. Journal of Hefei University of Technology，2020，43(1)：26-30，107.
[7] 张明柱，王界中，王建华，等. 提高燃油经济性的拖拉机变速控制策略[J]. 农业工程学报，2020，36(1)：82-89. ZHANG Mingzhu，WANG Jiezhong，WANG Jianhua，et al. Speed changing control strategy for improving tractor fuel economy[J]. Transactions of the Chinese Society of Agricultural Engineering，2020，36(1)：82-89.
[8] LARSSON L V，ERICSON L，UEBEL K，et al. Low-level control of hybrid hydro-mechanical transmissions for heavy mobile working machines[J]. Energies，2019，12(9)：1-20.
[9] AHN S，CHOI J，KIM S，et al. Development of an integrated engine-hydro-mechanical transmission control algorithm for a tractor[J]. Advances in Mechanical Engineering，2015，7(7)：29-32.
[10] MACOR A，ROSSETTI A. Optimization of hydro-mechanical power split transmissions[J]. Mechanism and Machine Theory，2011，46(12)：1901-1919.
[11] ROSSETTI A，MACOR A，SCAMPERLE M. Optimization of components and layouts of hydromechanical transmissions[J]. International Journal of Fluid Power，2017，18(2)：123-134.
[12] BENEVELLI A，CIARROCCHI M P. Planetary gear PTO unit with a hydraulic control，work vehicle comprising the same and PTO torque estimation：US2020156469A1[P]. 2020-05-21.
[13] Caterpillar，Inc. The new cat 966k xe wheel loader with advanced powertrain[EB/OL]. (2012-10-5) [2022-04-28]. https://www.cat.com/en_IN/news/machine-press-releases/the-new-cat-sup-174sup966kxeefficientcomfortablesustainable.html.
[14] 魏超，苑士华，胡纪滨，等. 等差式液压机械无级变速器的速比控制理论与试验研究[J]. 机械工程学报，2011，47(16)：101-105. WEI Chao，YUAN Shihua，HU Jibin，et al. Theoretical and experimental investigation of speed ratio follow-up control system on geometric type hydro-mechanical transmission[J]. Journal of Mechanical Engineering，2011，47(16)：101-105.
[15] 魏超，胡纪滨，荆崇波，等. HMT变速器速比跟踪控制对发动机转速的调节规律研究[J]. 北京理工大学学报，2012，32(5)：455-459. WEI Chao，HU Jibin，JING Chongbo，et al. Research of engine speed governing rule based on the speed ratio follow-up control of hydro-mechanical transmission[J]. Journal of Beijing Institute of Technology，2012，32(5)：455-459.
[16] 苑士华，侯国勇，张宝斌. 液压机械无级变速器的变参数PID控制[J]. 机械工程学报，2004(7)：81-84. YUAN Shihua，HOU Guoyong，ZHANG Baobin. Variable parameter PID control on the hydro-mechanical stepless transmission[J]. Journal of Mechanical Engineering，2004(7)：81-84.
[17] 胡海峰，史立新，张士庆. 拖拉机液压机械无级变速器控制策略仿真与试验[J]. 控制工程，2017，24(11)：2290-2295. HU Haifeng，SHI Lixin，ZHANG Shiqing. Simulation and experiment of hydro-mechanical CVT control strategy for tractor[J]. Control Engineering，2017，24(11)：2290-2295.
[18] 杨树军，鲍永，范程远. 液压机械全功率换段方法及功率过渡特性[J]. 农业工程学报，2018，34(5)：63-72. YANG Shujun，BAO Yong，FAN Chengyuan. Full power shift method of hydro-mechanical transmission and power transition characteristics[J]. Transactions of the Chinese Society of Agricultural Engineering，2018，34(5)：63-72.
[19] 杨树军，焦晓娟，鲍永，等. 油液含气量对液压机械换段性能的影响[J]. 机械工程学报，2015，51(14)：122-130. YANG Shujun，JIAO Xiaojuan，BAO Yong，et al. Fluid air content affecting the power shift performance of the hydro-mechanical variable transmission[J]. Journal of Mechanical Engineering，2015，51(14)：122-130.
[20] 于今，陈华，刘骏豪. 液压机械无级变速器的变论域模糊PID速比跟踪控制[J]. 中国机械工程，2019，30(10)：1226-1232. YU Jin，CHEN Hua，LIU Junhao. Speed ratio follow-up control of HMCVT based on variable universe fuzzy PID[J]. China Mechanical Engineering，2019，30(10)：1226-1232.
[21] 朱镇，高翔，曹磊磊，等. 泵控马达系统响应特性和效率特性的研究[J]. 机床与液压，2016，44(17)：87-92. ZHU Zhen，GAO Xiang，CAO Leilei，et al. Research on response characteristics and efficiency characteristics of pump-control-motor system[J]. Machine Tool & Hydraulics，2016，44(17)：87-92.
[22] OSAMURA K，ITOYAMA H，IWANO H. Study of an integrated diesel engine-CVT control algorithm for improving drivability and exhaust emission performance[R]. SAE，2001-01-3452.
[23] 张继成，严士超，纪文义，等. 基于增量式PID算法的多种固体肥精确施控系统研究[J]. 农业机械学报，2021，52(3)：99-106. ZHANG Jicheng，YAN Shichao，JI Wenyi，et al. Precision fertilization control system research for solid fertilizers based on incremental PID control algorithm[J]. Transactions of the Chinese Society for Agricultural Machinery，2021，52(3)：99-106.
[24] 常绿，徐礼超，吕猛，等. 基于典型工况试验的装载机循环工况构建[J]. 农业工程学报，2018，34(1)：63-69. CHANG Lü，XU Lichao，LÜ Meng，et al. Driving cycle construction of loader based on typical working condition test[J]. Transactions of the Chinese Society of Agricultural Engineering，2018，34(1)：63-69.
[25] 管恩禄，王霞，杨颖. 轮胎式装载机燃油消耗量试验方法探讨[J]. 中国标准化，2019(17)：204-206，212. GUAN Enlu，WANG Xia，YANG Ying. Discussion on wheel loader fuel consumption test method[J]. China Standardization，2019(17)：204-206，212.
[26] 邹乃威，黄鸿岛，章二平，等. 面向作业终端动力需求的装载机循环工况的创建[J]. 农业工程学报，2015，31(1)：78-85. ZOU Naiwei，HUANG Hongdao，ZHANG Erping，et al，Establish oriented operating terminals wheel loader duty cycle[J]. Transactions of the Chinese Society of Agricultural Engineering，2015，31(1)：78-85.
[27] NILSSON T，FRBERG A，SLUND J. Fuel and time minimization in a CVT wheel loader application[J]. IFAC Proceedings Volumes，2013，46(21)：201-206.