Heat Transfer Performance Evaluation of Ultrathin Flexible Heat Pipes with Vapor Channels Formed by Micro-imprint

doi:10.3901/JME.2024.14.329

Abstract

Abstract: The manufacturing equipment and fabrication process of ultrathin flexible heat pipe(UFHP) with PMMA casings are introduced in this study. A micro-column array fabricated by a separate micro-imprint mold and a high-temperature sintered multilayer copper mesh are used as vapor channel and wick, respectively, and UFHPs with a thickness of 0.67mm is fabricated. The effects of micro-imprint temperature, pressure, and dwell time on the forming of micro-pillars were studied. The test devices and the experimental methods of the heat transfer performance of UFHPs are introduced. The experimental results showed that the optimal liquid filling amount is 350-400 μL and the highest thermal conductivity reached 924.1 W/(m•K). The thermal conductivity of the UFHP is still 1.16 times that of copper with a bending angle of 90°. In summary, the UFHPs with PMMA casings fabricated by micro-imprint have the advantages of flexible structure, low cost, and low vapor flow resistance, and are an ideal solution to the heat dissipation problem of flexible wearable electronic devices.

Key words: flexible heat pipe, ultrathin, micro-imprint, vapor channel, polymer

CLC Number:

TK124

SUN Yalong, TANG Yong, LIANG Fuye, ZHANG Shiwei, WU Chunxia, SHUAI Mao, TANG Heng. Heat Transfer Performance Evaluation of Ultrathin Flexible Heat Pipes with Vapor Channels Formed by Micro-imprint[J]. Journal of Mechanical Engineering, 2024, 60(14): 329-337.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.14.329

http://www.cjmenet.com.cn/EN/Y2024/V60/I14/329

References

[1] GIBBONS M J，MARENGO M，PERSOONS T. A review of heat pipe technology for foldable electronic devices[J]. Applied Thermal Engineering，2021，194：117087.
[2] 汤勇，唐恒，万珍平，等. 超薄微热管的研究现状及发展趋势[J]. 机械工程学报，2017，53(20)：131-144. TANG Yong，TANG Heng，WAN Zhenping，et al. Development status and perspective trend of ultra-thin micro heat pipe[J]. Journal of Mechanical Engineering，2017，53(20)：131-144.
[3] 汤勇，孙亚隆，唐恒，等. 柔性热管的研究现状与发展趋势[J]. 机械工程学报，2022，58(10)：265-279. TANG Yong，SUN Yalong，TANG Heng，et al. Development status and perspective trend of flexible heat pipe[J]. Journal of Mechanical Engineering，2022，58(10)：265-279.
[4] JUNG C，LIM J，KIM S J. Fabrication and evaluation of a high-performance flexible pulsating heat pipe hermetically sealed with metal[J]. International Journal of Heat and Mass Transfer，2020，149：119180.
[5] SUGIMOTO K，ALASLI A，UENO A，et al. Design and fabrication of flexible two-phase heat transport device for wearable interfaces[C]// IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS)，2021，10(2)：95-98.
[6] PHAN N，NAGANO H. Fabrication and testing of a miniature flat evaporator loop heat pipe with polydimethylsiloxane and molding[J]. Applied Thermal Engineering，2020，175(2)：115377.
[7] SUN Y，ZHANG S，CHEN G，et al. Experimental and numerical investigation on a novel heat pipe based cooling strategy for permanent magnet synchronous motors[J]. Applied Thermal Engineering，2020，170(3)：114970.
[8] 汤勇，孙亚隆，郭志军，等. 电机散热系统的研究现状与发展趋势[J]. 中国机械工程，2021，32(10)：1135-1150. TANG Yong，SUN Yalong，GUO Zhijun，et al. Development status and perspective trend of motor cooling systems[J]. China Mechanical Engineering，2021，32(10)：1135-1150.
[9] GEBRAEL T，LI J，GAMBOA A R，et al. High-efficiency cooling via the monolithic integration of copper on electronic devices[J]. Nature Electronics，2022，12(5)：1-9.
[10] HUANG Q，DENG J，LI X，et al. Experimental investigation on thermally induced aluminum nitride based flexible composite phase change material for battery thermal management[J]. Journal of Energy Storage，2020，32(5)：101755.
[11] OSHAMN C，LI Q，LIEW L A，et al. Flat flexible polymer heat pipes[J]. Journal of Micromechanics and Microengineering，2013，23(1)：015001.
[12] LIU C，LI Q，FAN D. Fabrication and performance evaluation of flexible flat heat pipes for the thermal control of deployable structure[J]. International Journal of Heat and Mass Transfer，2019，144(2)：118661.
[13] 许乐. 超薄柔性平板热管的制备及其传热性能研究[D]. 南京：南京航空航天大学，2020. XU Le. Perparation and thermal performance study of ultra-thin flexible flat heat pipe[D]. Nanjing：Nanjing University of Aeronautics and Astronautics，2020.
[14] LEWIS R，XU S，LIEW L，et al. Thin flexible thermal ground planes：Fabrication and scaling characterization[J]. Journal of Microelectromechanical Systems，2015，24(6)：2040-2048.
[15] LEWIS R，LIEW L A，XU S，et al. Microfabricated ultra-thin all-polymer thermal ground planes[J]. Science Bulletin，2015，60(7)：701-706.
[16] WANG Z，LV J，LI J，et al. Fabrication and evaluation of micro-channel array for flexible on-chip PEMFC by new evaluation method and self-made hot embossing system[J]. The International Journal of Advanced Manufacturing Technology，2020，108(5-6)：1381-1387.
[17] DUMOND J J，LOW H Y. Recent developments and design challenges in continuous roller micro-and nanoimprinting[J]. Journal of Vacuum Science & Technology B，Nanotechnology and Microelectronics： Materials，Processing，Measurement，and Phenomena，2012，30(1)：010801.
[18] GONG D，LONG J，FAN P，et al. Thermal stability of micro-nano structures and superhydrophobicity of polytetrafluoroethylene films formed by hot embossing via a picosecond laser ablated template[J]. Applied Surface Science，2015，331(5)：437-443.
[19] PENG L，DENG Y，YI P，et al. Micro hot embossing of thermoplastic polymers：A review[J]. Journal of Micromechanics and Microengineering，2014，24(1)：013001.
[20] KRICKA L，FORTINA P，PANARO N，et al. Fabrication of plastic microchips by hot embossing[J]. Lab. on a Chip，2002，2(1)：1-4.
[21] LEE M，OH J，LIM H，et al. Enhanced liquid transport on a highly scalable，cost‐effective，and flexible 3D topological liquid capillary diode[J]. Advanced Functional Materials，2021，31(21)：2011208.
[22] 王丽，朱忠猛，蒋晗. 聚甲基丙烯酸甲酯材料(PMMA)纳米压/划痕变形热恢复的实验研究[J]. 实验力学，2022，37(2)：161-174. WANG Li，ZHU Zhongmeng，JIANG Han. Experimental study on thermal recovery of nano-indentation/scratch deformation of poly(methylmethacrylate)[J]. Journal of Experimental Mechanics，2022，37(2)：161-174.
[23] YANG Y，LI J，WANG H，et al. Microstructured wettability pattern for enhancing thermal performance in an ultrathin vapor chamber[J]. Case Studies in Thermal Engineering，2021，25(6)：100906.
[24] WILKE K L，ANTAO D S，CRUZ S，et al. Polymer infused porous surfaces for robust，thermally conductive，self-healing coatings for dropwise condensation[J]. ACS Nano，2020，14(11)：14878-14886.
[25] 聂聪. 超薄均热板二次除气/封口焊接机理及性能研究[D]. 广州：华南理工大学，2021. NIE Cong. Study on the mechanism and performance of secondary degassing/seal welding of ultra-thin vapor chamber[D]. Guangzhou：Southe China University of Technology，2021.
[26] 郭浩，纪献兵，周儒鸿，等. 超亲水毛细芯环路热管启动及热性能分析[J]. 化工进展，2020，39(4)：1227-1234. GUO Hao，JI Xianbing，ZHOU Ruhong，et al. Analysis of start-up and thermal performance of super-hydrophilic porous wick loop heat pipe[J]. Chemical Industry and Engineering Progress，2020，39(4)：1227-1234.
[27] TANG Y，HONG S，WANG S，et al. Experimental study on thermal performances of ultra-thin flattened heat pipes[J]. International Journal of Heat and Mass Transfer，2019，134(5)：884-894.
[28] TANG H，WENG C，TANG Y，et al. Thermal performance enhancement of an ultra-thin flattened heat pipe with multiple wick structure[J]. Applied Thermal Engineering，2021，183(8)：116203.
[29] 舒阳，周志雄，黄向明，等. 精密热压成型机关键技术研究与实现[J]. 机械工程学报，2018，54(17)：200-207. SHU Yang，ZHOU Zhixiong，HUANG Xiangming，et al. Research and implementation on critical technology of precision compression molding tool[J]. Journal of Mechanical Engineering，2018，54(17)：200-207.
[30] LI D，HUANG Z，ZHAO J，et al. Analysis of heat transfer performance and vapor-liquid meniscus shape of ultra-thin vapor chamber with supporting columns[J]. Applied Thermal Engineering，2021，193(5)：117001.
[31] LIN M C，YEH J P，CHEN S C，et al. Study on the replication accuracy of polymer hot embossed microchannels[J]. International Communications in Heat and Mass Transfer，2013，42(6)：55-61.
[32] FENG W，QIN M，FENG Y. Toward highly thermally conductive all-carbon composites：Structure control[J]. Carbon，2016，109：575-597.
[33] DOMICIANO K G，KRAMBECK L，FLOREZ J，et al. Thin diffusion bonded flat loop heat pipes for electronics：Fabrication，modelling and testing[J]. Energy Conversion and Management，2022，255：115329.