Research on the Morphological Characteristics of Hysteretic Curve of Reducer

doi:10.3901/JME.2024.01.343

Abstract

Abstract: The hysteresis curve is used to reflect the hysteresis phenomenon of the reducer, but in engineering practice, the morphologic characteristics of the hysteresis curve are ignored and default to have the loading rate independence. The loading rate dependence of the morphologic of the hysteresis curve of the reducer is demonstrated, and the specific impact is analyzed. Four parameters are proposed to characterize the morphological characteristics of the hysteresis curve, and the physical meaning of each parameter is given. Through further experimental research, it has been verified that the morphologic of the hysteretic curve of the reducer has the loading rate dependence, and the changes of the four parameters of the reducer with different materials under different loading rates are clarified. Finally, it points out the value of the morphologic characteristics of the hysteresis curve in theory and engineering application.

Key words: reducer, hysteresis curve, loading rate dependence, morphological characteristic parameters

CLC Number:

TH89

SHI Zhaoyao, CHENG Huiming. Research on the Morphological Characteristics of Hysteretic Curve of Reducer[J]. Journal of Mechanical Engineering, 2024, 60(1): 343-351.

References

[1] MORRIS K A. What is hysteresis?[J]. Applied Mechanics Reviews an Assessment of the World Literature in Engineering Sciences,2011.
[2] 徐航. 精密减速器回差测量与评价体系研究[D]. 北京:北京工业大学,2018. XU Hang. Research on measurement and evaluation system of precision reducer lost motion[D]. Beijing:Beijing University of Technology,2018.
[3] 宾帅. 超弹性形状记忆合金性能试验与力学模型研究[D]. 湘潭:湖南科技大学,2015. BIN Shuai. Superelastic shape memory alloy research on performance test and mechanical model[D]. Xiangtan:Hunan University of Science and Technology,2015.
[4] 程慧明,石照耀,于渤,等. 服务机器人小型关节回差测量的试验研究[J]. 仪器仪表学报,2020,41(5):48-57. CHENG Huiming,SHI Zhaoyao,YU Bo,et al. Experiment research on hysteresis measurement of the small-size joint of service robot[J]. Chinese Journal of Scientific Instrument,2020,41(05):48-57.
[5] 石照耀,徐航,韩方旭,等.精密减速器回差测量的现状与趋势[J]. 光学精密工程,2018,26(9):2150-2158. SHI Zhaoyao,XU Hang,HAN Fangxu,et al. Current status and trends in precision reducer lost motion measurement[J]. Optics and Precision Engineering,2018,26(9):2150-2158.
[6] 安子军,杨荣刚,宜亚丽. 精密钢球传动啮合法向力与弹性回差[J]. 机械工程学报,2016,52(9):42-48. AN Zijun,YANG Ronggang,YI Yali. Engagement Normal force and elastic backlash of precision ball transmission[J]. Journal of Mechanical Engineering,2016,52(9):42-48.
[7] 石照耀,程慧明. 国内外机器人关节测试技术研究现状及展望[J]. 哈尔滨工程大学学报,2023,44(05):679-688. SHI Zhaoyao,CHENG Huiming. Status and prospects of domestic and international research on robot actuator testing technology[J]. Journal of Harbin Engineering University,2023,44(5):679-688.
[8] 李鸿光,孟光,闻邦椿. 带间隙的双线滞回系统的非线性振动[J]. 机械工程学报,2004,40(7):10-13. LI Hongguang,MENG Guang,WEN Bangchun. Nonlinear oscillation of bilinear hysteretic system with clearance.[J]. Journal of Mechanical Engineering,2004,40(7):10-13.
[9] SHI Zhaoyap,CHENG Huiming,YU Bo,et al. Loading rate dependence of reducer hysteresis and its influence on lost motion test[J]. Machines,2022,10(9):765-786.
[10] AI-BENDER F,LAMPAERT V,SWEVERS J. The generalized Maxwell-slip model:A novel model for friction simulation and compensation[J]. IEEE Transactions on Automatic Control,2005,50(11):1885-1887.
[11] 国家市场监督管理总局,中国国家标准化管理委员会. GB/T 40731-2021,精密减速器回差测试与评价方法[S]. 北京:中国标准出版社,2021. General Administration of Quality Supervision,State Administration for Market Regulation. GB/T 40731-2021,Method of test and evaluation for lost motion of precision reducer[S]. Beijing:Standards Press of China,2021.
[12] CHENG Huiming,SHI Zhaoyao,YU Zhiyong. Dynamic torsional stiffness of reducers and its testing method[J]. Applied Sciences,2023,13(16):9277-9293.
[13] 俞志勇,石照耀,程慧明,等. 精密减速器回差试验台的度特性[J]. 光学精密工程,2023,31(16):2372-2382. YU Zhiyong,SHI Zhayo,CHNEG Huiming. Accuracy characteristic of test bench of lost motion of precision reducer[J]. Optics and Precision Engineering,2023,31(16):2372-2382.

[1]	SHI Zhaoyao, YU Zhiyong, CHENG Huiming, YU Bo, ZUO Guangxiang. Accuracy Performance Evaluation System for Precision Reducer Testing Machine [J]. Journal of Mechanical Engineering, 2024, 60(16): 62-72.
[2]	ZHANG Dequan, LI Xingao, JIA Xinyu, YE Nan, HAN Xu. Dynamic Model Updating and Dynamic Response Prediction Method of RV Reducer Based on Hierarchical Bayesian Inference [J]. Journal of Mechanical Engineering, 2024, 60(11): 135-144.
[3]	LI Huilai, LING Zhenfei, WANG Zezheng, SUN Maowen, LIU Hao, OUYANG Xiaoping, LI Binbin. Research on High Torque Density Drive Unit for Humanoid Robots [J]. Journal of Mechanical Engineering, 2022, 58(18): 192-204.
[4]	HAN Te, LI Yanfu, LEI Yaguo, LI Naipeng, LI Xiang. Semi-supervised Fault Diagnosis Method via Graph Label Propagation and Discriminative Feature Enhancement for Critical Components of Industrial Robot [J]. Journal of Mechanical Engineering, 2022, 58(17): 116-124.
[5]	XU Lixin. A Study on Dynamic Load Characteristics of Multi-group Needle Roller Bearings Used in RV Reducer Considering the Position Errors [J]. Journal of Mechanical Engineering, 2022, 58(17): 144-155.
[6]	TANG Yong, WANG Zhiwei, CHEN Gong, ZHANG Shiwei, YUAN Wei. Research on Critical Technologies of Low-cost Cold Precision Extrusion of Cycloidal Gear [J]. Journal of Mechanical Engineering, 2022, 58(14): 154-160.
[7]	HUANG Jian, LI Chaoyang, CHEN Bingkui. Analysis and Experimental Study on Static Load Capacity of a New Radial-axial Roller Bearing Integrated in RV Reducer [J]. Journal of Mechanical Engineering, 2021, 57(7): 68-77.
[8]	PENG Peng, KE Liangliang, WANG Jiugen. Fault Diagnosis of RV Reducer with Noise Interference [J]. Journal of Mechanical Engineering, 2020, 56(1): 30-36.
[9]	WANG Jiugen, KE Liangliang. Fault Diagnosis for RV Reducer Based on Residual Network [J]. Journal of Mechanical Engineering, 2019, 55(3): 73-80.
[10]	WANG Guanglin;PAN Xudong;LI Yuefeng. Disposable Mechanical Element Design Theory and Applications [J]. , 2014, 50(1): 152-156.
[11]	WANG Guanglin;PAN Xudong;LI Yuefeng. Disposable Mechanical Element Design Theory and Applications [J]. , 2014, 50(1): 152-156.
[12]	CHENG Hang;YU Liangliang;HUANG Chaoyong. Experiment Modal Parameter Identification for Continuous Miner Speed Reducer Based on Mixture Genetic Algorithm [J]. , 2013, 49(3): 74-79.
[13]	LIANG Xichang;LÜHongzhan. Research on Categorizing Innovation of Speed Reducers [J]. , 2011, 47(7): 1-7.
[14]	ZHANG Ganqing;GONG Xiansheng;WANG Huanhuan;DENG Xiaodong;WANG Benshu. Multi-objective Optimization Design on Gear Train of Planetary Reducer in Shield Tunneling Machine Based on Reliably Grey Particle Swarm Optimization [J]. , 2010, 46(23): 135-145.
[15]	ZHU Caichao;TANG Qian;WANG Jiaxu;TAN Yonghu. Dynamic Chcharacteristics of New Ring-reducer [J]. , 2008, 44(4): 58-62.