Decision-making for Product Life Cycle Design Solution Based on Multi-layer Constraints Satisfaction Problem
KONG Lin1,2,3, WANG Liming1,2,3, Lü Xiaoteng1,2,3, LI Fangyi1,2,3
1. School of Mechanical Engineering, Shandong University, Jinan 250061; 2. Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University, Jinan 250061; 3. National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061
KONG Lin, WANG Liming, Lü Xiaoteng, LI Fangyi. Decision-making for Product Life Cycle Design Solution Based on Multi-layer Constraints Satisfaction Problem[J]. Journal of Mechanical Engineering, 2023, 59(11): 276-289.
[1] KONG L,WANG L,LI F,et al. Multi-layer integration framework for low carbon design based on design features[J]. Journal of Manufacturing Systems,2021,61:223-238. [2] DOWLATSHAHI S. Product design in a concurrent engineering environment:An optimization approach[J]. International Journal of Production Research,2007,30(8):1803-1818. [3] CHIU M C,CHU C H. Review of sustainable product design from life cycle perspectives[J]. International Journal of Precision Engineering & Manufacturing,2012,13(7):1259-1272. [4] KONG L,WANG L,LI F,et al. Toward product green design of modeling,assessment,optimization,and tools:A comprehensive review[J]. The International Journal of Advanced Manufacturing Technology,2022. [5] ZHANG,Y Z,LUO X F,BUIS J J,et al. LCA-oriented semantic representation for the product life cycle[J]. Journal of Cleaner Production,2015,86:146-162. [6] WANG W,TIAN G,ZHANG T,et al. Scheme selection of design for disassembly (DFD) based on sustainability:A novel hybrid of interval 2-tuple linguistic intuitionistic fuzzy numbers and regret theory[J]. Journal of Cleaner Production,2020,281:124724. [7] ZHANG H,HAN X,LI R,et al. A new conceptual design method to support rapid and effective mapping from product design specification to concept design[J]. International Journal of Advanced Manufacturing Technology,2016,87(5):2375-2389. [8] HE B,ZHANG P,LIU L. Simultaneous functional synthesis of mechanisms with mechanical efficiency and cost[J]. International Journal of Advanced Manufacturing Technology,2014,75(5/8):659-665. [9] CHEN Y,ZHANG Z,XIE Y,et al. A new model of conceptual design based on scientific ontology and intentionality theory. Part I:The conceptual foundation[J]. Design Studies,2015,37:12-36. [10] LI L,YU S,TAO J,et al. A FBS-based energy modelling method for energy efficiency-oriented design[J]. Journal of Cleaner Production,2018,172:1-13. [11] KONG L,WANG L,LI F,et al. A life-cycle integrated model for product eco-design in the conceptual design phase[J]. Journal of Cleaner Production,2022,363:132516. [12] 张雷,彭宏伟,刘志峰,等. 绿色产品概念设计中的知识重用[J]. 机械工程学报,2013,49(7):72-79. ZHANG Lei,PENG Hongwei,LIU Zhifeng,et al. Knowledge reuse in green product concept design process[J]. Journal of Mechanical Engineering,2013,49(7):72-79. [13] JEONG M G,SUH H W,MORRISON J R. A framework for stepwise life cycle assessment during product design with case-based reasoning[C]// Automation Science and Engineering (CASE),2010 IEEE Conference on. IEEE,2010. [14] 苏开远,徐志刚,朱建峰,等. 基于Petri网的废旧产品拆卸设备设计[J]. 浙江大学学报,2020,54(9):1795-1804. SU Kaiyuan,XU Zhigang,ZHU Jianfeng,et al. Dismantling equipment design for scrap product based on Petri net [J]. Journal of Zhejiang University,2020,54(9):1795-1804. [15] UMEDA Y,KONDOH S,SHIMOMURA Y,et al. Development of design methodology for upgradable products based on function-behavior-state modeling[J]. Artificial Intelligence for Engineering Design Analysis and Manufacturing,2005,19(3):161-182. [16] ZANG H S,SUN Q C,WU J L,et al. The research of product concept feature modeling based on energy saving[C] //Advances in Manufacturing Science and Engineering. The 4th International Conference on Manufacturing Science and Engineering,2013:2917-2924. [17] TCHERTCHIAN N,YVARS P A,MILLET D. Benefits and limits of a constraint satisfaction problem/life cycle assessment approach for the ECO design of complex systems:a case applied to a hybrid passenger ferry[J]. Journal of Cleaner Production,2013,42(3):1-18. [18] POPOFF,A,MILLET D. Sustainable life cycle design using constraint satisfaction problems and quality function deployment[J]. Procedia CIRP,2017,61:75-80. [19] 林晓华,冯毅雄,谭建荣. 产品方案设计约束模型及其演化博弈算法求解[J]. 浙江大学学报,2012,46(3):533-541. LIN Xiaohua,FENG Yixiong,TAN Jianrong. Constraint model and calculating method by evolutionary game algorithm for product conceptual design[J]. Journal of Zhejiang University,2012,46(3):533-541. [20] DING L,MATTHEWS J,MULLINEUX G. Capturing constraint evolution:a technique to preserve and handle design knowledge[J]. International Journal of Product Development,2011,15(1/3):135-155. [21] 李洪杰,肖人彬. 基于约束网络的机械产品设计方法原理[J]. 机械工程学报,2004,40(1):121-126. LI Hongjie,XIAO Renbin. Principle of mechanical product design methodology based on constraint network[J]. Journal of Mechanical Engineering,2004,40(1):121-126. [22] 张雷,刘光复,胡迪,等. 基于约束满足问题的绿色产品配置设计[J]. 机械工程学报,2010,46(19):117-124. ZHANG Lei,LIU Guangfu,HU Di,et al. Green product configuration design based on constraint satisfaction problems[J]. Journal of Mechanical Engineering,2010,46(19):117-124. [23] 袁际军. 大规模定制下基于约束的产品配置方法研究[D]. 长沙:湖南大学,2008. YUAN Jijun. Research on constraint based product configuration method for mass customization[D]. Changsha:Hunan University,2008. [24] LIU A J,ZHU Q Y,JI X H,et al. Novel method for perceiving key requirements of customer collaboration low-carbon product design[J]. International Journal of Environmental Research and Public Health,2018,15(7):1446-1478. [25] KARUPPIAH K,SANKARANARAYANAN B,ALI S M ,et al. An integrated approach to modeling the barriers in implementing green manufacturing practices in SMEs[J]. Journal of Cleaner Production,2020,265:597-615. [26] WEI C,WU J,GUO Y,et al. Green supplier selection based on codas method in probabilistic uncertain linguistic environment[J]. Technological and Economic Development of Economy,2021,27(3):530-549. [27] 田广东,张洪浩,王丹琦. 基于模糊AHP-灰色关联TOPSIS的拆解方案评估研究[J]. 机械工程学报,2017,53(5):34-40. TIAN Guangdong,ZHANG Honghao,WANG Danqi. Disassembly program evaluation research based on fuzzy AHP,grey correlation and TOPSIS combined approach[J]. Journal of Mechanical Engineering,2017,53(5):34-40. [28] 李方义,彭鑫,王黎明,等. 基于预期目标的高效能电机方案绿色度评价[J]. 中国机械工程,2018,29(21):2527-2532. LI Fangyi,PENG Xin,WANG Liming,et al. Green degree evaluation of high efficiency motor schemes based on expected goal[J]. China Mechanical Engineering,2018,29(21):2527-2532. [29] 赖荣燊,林文广,吴永明. 面向绿色性能优化的产品族模块再设计优先次序识别[J].中国机械工程,2019,30(11):1329-1335. LAI Rongshen,LIN Wenguang,WU Yongming. Redesign priority identification of product family modules for green performance optimization[J]. China Mechanical Engineering,2019,30(11):1329-1335. [30] LIU S H,ZHENG W. Priority order recognition method of module redesign for the CNC machine tool product family to improve green performance[J]. Transactions of the Canadian Society for Mechanical Engineering,2021,45(4):513-531. [31] LI Y Z,WANG S H,LIU H,et al. A backtracking differential evolution with multi-mutation strategies autonomy and collaboration[J]. Applied Intelligence,2021,52(3):3418-3444. [32] ZEINE A T,HAMI A E,ELLAIA R,et al. Backtracking search algorithm for multi-objective design optimization[J]. International Journal of Mathematical Modelling and Numerical Optimization,2017,8(2):93-107. [33] LIN J. Oppositional backtracking search optimization algorithm for parameter identification of hyperchaotic systems[J]. Nonlinear Dynamics,2015,80(1/2):209-219. [34] GB/T 32161-2015,生态设计产品评价通则[S]. 北京:中国标准出版社,2015. GB/T 32161-2015,General principles for eco design product assessment[S]. Beijing:China Standard Press,2015. [35] 王金龙,高斯博,杨宇星,等. 机械装备可再制造性评价研究综述[J]. 机械工程学报,2022,58(3):221-234. WANG Jinlong,GAO Sibo,YANG Yuxing,et al. Review of the remanufacturability evaluation of mechanical equipment[J]. Journal of Mechanical Engineering,2022,58(3):221-234. [36] GUO J W,ZHOU M C,LI Z W,et al. Green design assessment of electromechanical products based on group weighted-AHP[J]. Enterprise Information Systems,2015,9(7/8):878-899.