Coupling Effect between Viscosity and Viscous Dissipation in the Microscale Flow of Polymer Melt

doi:10.3901/JME.2022.06.052

Abstract

Abstract: There exists a coupling relationship between viscosity and viscous dissipation during polymer micro molding. In order to explore the coupling effect on the rheological properties of the melt, it is studied by combining numerical simulation and experimental. A coupling model which is based on a common variable temperature is presented, and the rheological characteristic parameters of polymer melt which flows in rectangular cross section micro channels are calculated and analyzed. Then the numerical result is evaluated by the melt experiment temperature along the flow direction. The results indicate that as the equivalent diameter decreases, viscosity decreases, viscous dissipation increases, and the coupling effect on viscosity and viscous dissipation becomes stronger. The temperature of the melt increases along the flow direction. The temperature rise value of the melt is higher when the coupling is not considered than when the coupling is considered, and the deviation increases with the decrease of the equivalent diameter. The maximum deviation where the average temperature rise value is 7.26% and 7.05% respectively for different inlet velocities and different inlet temperatures. The numerical simulation values by considering the coupling are consistent with the experimental results. As the different inlet velocities, the minimum deviation of the average temperature rise value between the numerical simulation results with considering the coupling and the experimental results is 0.49 K. As the different inlet temperatures, the minimum deviation of the average temperature rise value between the numerical simulation results with considering the coupling and the experimental results is 0.59 K. Therefore, it can be more accurately reflect the actual change regularities of melt rheological properties with considering the coupling between viscosity and viscous dissipation, when analyzing the melt flow in the polymer micro molding process.

Key words: polymer, microscale, viscosity, viscous dissipation, melt temperature

CLC Number:

TG156

ZHANG Jiakun, WANG Minjie, LI Hongxia, YU Tongmin. Coupling Effect between Viscosity and Viscous Dissipation in the Microscale Flow of Polymer Melt[J]. Journal of Mechanical Engineering, 2022, 58(6): 52-61.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2022.06.052

http://www.cjmenet.com.cn/EN/Y2022/V58/I6/52

References

[1] KOO J，KLEINSTREUER C. Liquid flow in microchannels: experimental observations and computational analyses of microfluidics effects[J]. Journal of Micromechanics & Microengineering，2003，13(5)：568-579.
[2] CHAN H B，AKSYUK V，KLEIMAN R，et al. Quantum mechanical actuation of microelectromechanical systems by the Casimir force[J]. Science，2001，293(5536)：1766-1766.
[3] KOO Jo，KLEINSTREUER C. Viscous dissipation effects in microtubes and microchannels[J]. International Journal of Heat & Mass Transfer，2004，47(14-16)：3159-3169.
[4] TUNC G，BAYAZITOGLU Y. Heat transfer in microtubes with viscous dissipation[J]. International Journal of Heat & Mass Transfer，2001，44(13)：2395-2403.
[5] DINH S，ARMSTRONG R. Non-isothermal channel flow of non-newtonian fluids with viscous heating[J]. Aiche Journal，1982，28(2)：294-301.
[6] YBARRA R，ECKERT R. Viscous heat generation in slit flow[J]. Aiche Journal，1980，26(5)：751-762.
[7] 徐斌，王敏杰，于同敏，等. 微通道聚合熔体粘性耗散尺度效应[J]. 高分子材料科学与工程，2014，30(7)：105-109. XU Bin，WAGN Minjie，YU Tongmin，et al. Viscous dissipation scale effect on polymer melt in micro channels[J]. Polymer Materials Science ＆ Engineering，2014，30(7)：105-109.
[8] ERINGEN A，OKADA K. A lubrication theory for fluids with microstructure[J]. International Journal of Engineering Science，1995，33(15)：2297-2308.
[9] YAO Donggang，KIM B. Simulation of the filling process in micro channels for polymeric materials[J]. Journal of Micromechanics & Microengineering，2002，12(5)：604-610.
[10] CROSS M. Relation between viscoelasticity and shear-thinning behavior in liquids[J]. Rheologica Acta，1979，18(5)：609-614.
[11] 庄俭. 微注塑成型充模流动理论与工艺试验研究[D]. 大连：大连理工大学，2007. ZHUANG Jian. Research on filling flow theory and processing experiment in micro injection molding[D]. Dalian：Dalian University of Technology，2007.
[12] 王敏杰，田慧卿，赵丹阳. 聚合物熔体微尺度剪切黏度测量方法与黏度模型[J]. 机械工程学报，2012，48(16)：21-29. WANG Minjie，TIAN Huiqing，ZHAO Danyang. Micro-scale shear viscosity testing approach and viscosity model of polymer melts[J]. Journal of Mechanical Engineering，2012，48(16)：21-29.
[13] KOO J，KLEINSTREUER C. Liquid flow in microchannels：Experimental observations and computational analyses of microfluidics effects[J]. Journal of Micromechanics & Microengineering，2003，13(5)：568-579.
[14] MORINI G. Viscous heating in liquid flows in micro-channels[J]. International Journal of Heat and Mass Transfer，2005，48(17)：3637-3647.
[15] XU Bing，WANG Minjie，YU Tongmin，et al. Viscous dissipation influencing viscosity of polymer melt in micro channels[J]. Journal of Mechanical Science & Technology，2010，24(7)：1417-1423.
[16] 庄俭，于同敏，王敏杰. 微注塑成形中熔体充模流动分析及其数值模拟[J]. 机械工程学报，2008，44(9)：43-49. ZHUANG Jian，YU Tongmin，WANG Minjie. Analysis and numerical simulation of polymer melt filling in micro injection molding[J]. Journal of Mechanical Engineering，2008，44(9)：43-49.
[17] 于同敏，永恒，贝海鑫，等. 微尺度通道中聚合物熔体的黏性耗散效应[J]. 化工学报，2013，64(8)：2781-2787. YU Tongmin，YONG Heng，BEI Haixin，et al. Viscous dissipation effects of polymer melts in micro-channels[J]. Journal of Chemical Industry and Engineering(China)，2013，64(8)：2781-2787.
[18] 于同敏，贝海鑫. 微注塑充模流动中的粘性耗散效应[J]. 高分子材料科学与工程，2012，28(12)：164-168. YU Tongmin，BEI Haixin. Viscous dissipation effects in micro-injection molding filling flow[J]. Polymer Materials Science & Engineering，2012，28(12)：164-168.
[19] 田慧卿. 聚合物多腔微管挤出成型理论与模具设计方法[D]. 大连：大连理工大学，2016. TINA Huiqing. Extrusion theory and die design method of polymer multi-lumen micro tubes[D]. Dalian：Dalian University of Technology，2016.
[20] ISHIKAWA T，KIHARA S，FUNATSU K. 3-D non-isothermal flow field analysis and mixing performance evaluation of kneading blocks in a co-rotating twin srew extruder[J]. Polymer Engineering and Science，2001，41(5)：840-849.
[21] 于同敏，张拯恺，邹德健. 矩形截面微模具通道中熔体的黏性耗散效应[J]. 化工学报，2017，68(4)：1306-1317. YU Tongmin，ZHANG Zhengkai，ZOU Dejian. Viscous dissipation effect of polymer melt in a rectangular cross section micro mold channel[J]. Journal of Chemical Industry and Engineering，2017，68(4)：1306-1317.