Research on Prediction Method of Stability Lobe Diagram for Ball-end Mill Based on Engagement

doi:10.3901/JME.2019.01.052

Abstract

Abstract: The equations for the boundaries of ball-end mill-workpiece engagement (BWE) are precisely established by a semi-analytical method at first. The differential dynamic equation derived from the ideal 2-Dof milling system is solved by the complete discrete method. Based on the cutter within a tooth passing period considered as arc path cutting, the instantaneous cutting positions required in the numerical solution are identified by the relationship of cutter edge and BWE. The stability lobe diagram is constructed by Floquet theory, which is subsequently verified on a three-axis NC machine tool. The experimental results are in good agreement with the predicted results, indicating the validity of this method. In contrast to traditional method, the proposed method shows higher prediction precision. The influence laws of different parameters on stability are analyzed at last, which can give a help for the actual machining.

Key words: ball-end mill, chatter, engagement, stability lobe diagram

CLC Number:

TG113

DAI Yuebang, WEI Zhaocheng, LI Hongkun, ZHANG Mengzhe. Research on Prediction Method of Stability Lobe Diagram for Ball-end Mill Based on Engagement[J]. Journal of Mechanical Engineering, 2019, 55(1): 52-61.

References

[1] ALTINTAS Y,BUDAK E. Analytical prediction of stability lobes in milling[J]. CIRP Annals-Manufacturing Technology,1995,44(1):357-362.
[2] MERDOL S,ALTINTAS Y. Multi frequency solution of chatter stability for low immersion milling[J]. Journal of Manufacturing Science & Engineering,2004,126(3):459-466.
[3] INSPERGER T,STEPAN G. Updated semi-discretization method for periodic delay-differential equations with discrete delay[J]. International Journal for Numerical Methods in Engineering,2004,61(1):117-141.
[4] LI Z,YANG Z,PENG Y,et al. Prediction of chatter stability for milling process using Runge-Kutta-based complete discretization method[J]. The International Journal of Advanced Manufacturing Technology,2016,86(1):943-952.
[5] DING Y,ZHU L,ZHANG X,et al. Second-order full-discretization method for milling stability prediction[J]. International Journal of Machine Tools & Manufacture,2010,50(10):926-932.
[6] LI M,ZHANG G,HUANG Y. Complete discretization scheme for milling stability prediction[J]. Nonlinear Dynamics,2012,71(1-2):187-199.
[7] 李忠群. 复杂切削条件高速铣削加工动力学建模、仿真与切削参数优化研究[D]. 北京:北京航空航天大学,2008. LI Zhongqun. Dynamic modeling,simulation and optimization of high speed milling under complicated cutting conditions[D]. Beijing:Beihang University,2008.
[8] 李忠群,刘强. 圆角铣削颤振稳定域建模与仿真研究[J]. 机械工程学报,2010,46(7):181-186. LI Zhongqun,LIU Qiang. Modeling and simulation of chatter stability for circular milling[J]. Journal of Mechanical Engineering,2010,46(7):181-186.
[9] 吴石,刘献礼,宋盛罡,等. 铣刀磨损对铣削稳定性及表面位置误差的影响[J]. 振动、测试与诊断, 2015, 35(4):763-769. WU Shi,LIU Xianli,SONG Shenggang,et al. The influence of wear loss of milling cutter on milling stability and surface location error[J]. Journal of Vibration,Measurement and Diagnosis,2015,35(4):763-769.
[10] 宋盛罡. 薄板件铣削过程颤振稳定域预测及实验研究[D]. 哈尔滨:哈尔滨理工大学,2015. SONG Shengang. Prediction and experimental study on the chatter stability in milling of thin part[D]. Harbin:Harbin University of Science and Technology,2015.
[11] 胡瑞飞,殷鸣,刘雁,等. 切削稳定性约束下的铣削参数优化技术研究[J]. 机械工程学报,2017,53(5):190-198. HU Ruifei,YIN Ming,LIU Yan,et al. Optimization of milling parameters under constrain of process stability,Journal of Mechanical Engineering,2017,53(5):190-198.
[12] 刘强,李忠群. 数控铣削加工过程仿真与优化:建模、算法与工程应用[M]. 北京:航空工业出版社,2011. LIU Qiang,LI Zhongqun. Simulation and optimization of CNC milling progress:Modeling,algorithms and applications[M]. Beijing:Aviation Industrial Publishing House,2011.

[1]	LIU Kuo, JIANG Yeming, HUANG Renjie, LI Mingyu, CHEN Hu, WANG Yongqing. Research on High-efficiency Adaptive Machining Technology of Machine Tools Considering Online Chatter Suppression [J]. Journal of Mechanical Engineering, 2024, 60(6): 104-113.
[2]	LI Chao, ZHANG Jun, TIAN Hui, ZHAO Wanhua. Timely Chatter Detecting Method in Milling with Integrated Energy Ratio and Amplitude Standard Deviation of Vibration Signal [J]. Journal of Mechanical Engineering, 2024, 60(14): 11-23.
[3]	TAN Zhipu, QIN Guohua, LOU Weida, WU Zhuxi. High Precision Judgement Method for Milling Stability Based on Bernoulli Distribution and Hybrid Drive Model [J]. Journal of Mechanical Engineering, 2024, 60(11): 318-331.
[4]	SUN Zhaoyang, PENG Fangyu, TANG Xiaowei, YAN Rong, XIN Shihao, WU Jiawei. Robotic Milling Chatter Types Detection Based on Adaptive VariationalMode Decomposition and Difference of Power Spectral Entropy [J]. Journal of Mechanical Engineering, 2023, 59(9): 90-100.
[5]	WANG Xiaoyong, GAO Zhiying, XIN Yanli. Identification and Forecast of Cold Rolling Chatter Based on Recurrence Quantification Analysis [J]. Journal of Mechanical Engineering, 2023, 59(9): 137-145.
[6]	ZHU Zijun, ZHU Xianglong, DONG Zhigang, KANG Renke, BAO Yan. A Review of Research on Chatter Stability of Grinding Processes [J]. Journal of Mechanical Engineering, 2023, 59(21): 15-33.
[7]	LOU Weida, QIN Guohua, WANG Huamin, WU Zhuxi. Multi-objective Optimization Method of Stable Milling Process Parameters Based on BP Neural Network and Composite Cotes Integration [J]. Journal of Mechanical Engineering, 2023, 59(17): 279-290.
[8]	LIU Jianing, CAO Hongrui, YAN Penghui, JI Wenchen. Deep Transfer Learning Method and Its Application in Grinding Chatter Marks Identification under Variable Working Conditions [J]. Journal of Mechanical Engineering, 2023, 59(16): 128-136.
[9]	LIU Chunjing, TANG Dunbing, CHEN Xingqiang, WEI Tianlu. Research on Stability of Milling System Based on Updated Complete Discretization Method [J]. Journal of Mechanical Engineering, 2023, 59(15): 162-173.
[10]	ZHANG Lei, ZHENG Kan, SUN Lianjun, SUN Hongwei, XUE Feng, WANG Tao. Investigation on Chatter Monitoring of Composite Milling Edge Based on the Selection of Sensitive Frequency Band of Wavelet Packet [J]. Journal of Mechanical Engineering, 2022, 58(3): 140-148.
[11]	YE Songtao, YAN Sijie, LI Wentao, XU Xiaohu, LU Jialin. Analysis of Tool Tip Dynamic Characteristics and Stability Prediction for Robotic Milling Tasks [J]. Journal of Mechanical Engineering, 2022, 58(17): 261-275.
[12]	WANG Zhixue, LIU Xianli, LI Maoyue, WANG Lihui, Steven Y. LIANG, YU Fuhang. Multi-point Contact Stability Prediction Considering Force-induced Deformation Effect in Milling Thin-Walled Parts [J]. Journal of Mechanical Engineering, 2022, 58(17): 309-320.
[13]	DONG Yongheng, LI Shujuan, ZHANG Qian, HONG Xiantao, LI Pengyang, LI Qi, LI Yan. Modeling on Static Milling Force of Ball-end-milling Cutters Based on Semi-analytical Method [J]. Journal of Mechanical Engineering, 2022, 58(11): 282-294.
[14]	CHEN Yun, HOU Liang, LIU Wenzhi, BU Xiangjian. Chatter Stability Prediction in Low Immersion Milling Based on Time-domain Simulation [J]. Journal of Mechanical Engineering, 2021, 57(3): 98-106.
[15]	LIU Tao, DENG Zhaohui, LUO Chengyao, Lü Lishu, LI Zhongyang, WAN Linlin. Stability Modeling and Analysis of Non-circular High-speed Grinding with Consideration of Dynamic Grinding Depth [J]. Journal of Mechanical Engineering, 2021, 57(15): 264-274.