Temperature Field Analysis of Roll Heated by Fluid-solid Coupled Heat Transfer

doi:10.3901/JME.2018.24.051

Abstract

Abstract: At present, the roll temperature control method in the magnesium alloy rolling process is inaccurate, which has a serious influence on the shape, crack of the sheet. The temperature control of the roll is carried out by means of fluid circulation, using FLUENT software to simulate the fluid-solid coupled heat transfer and verifying by experimental results. The results show that the roll heated by this method the surface temperature distribution is linearly distributed, and the temperature difference between the edge and the centre is in the range of 3-7℃, the effective roll interval accounts for 85%-100% of the total length of the roll, and the fluid temperature and velocity have little effect on it. At different fluid temperatures and velocities, the roll temperature increases with the decrease of decreasing rate. The relationship between the roll surface temperature and the time is obtained under different heating conditions in this study. The simulated values of the average roll surface temperature agree well with the experimental values, the maximum relative error is 6.29%, which shows that the model can predict the average temperature of roll surface accurately, and as part of the magnesium alloy plate rolling model, it is conducive to the isothermal control of the roll in the rolling process and realizes isothermal rolling control of magnesium alloy plate.

Key words: fluid-solid couplingheat transfer, magnesium alloy, rolling process, temperature control, temperature field

CLC Number:

TG156

LI Yang, MA Lifeng, JIANG Zhengyi, HUANG Zhiquan, LIN Jinbao, JI Yafeng. Temperature Field Analysis of Roll Heated by Fluid-solid Coupled Heat Transfer[J]. Journal of Mechanical Engineering, 2018, 54(24): 51-60.

References

[1] MORDIKE B L, EBERT T. Magnesium properties applications potential[J]. Materials Science and Engineering:A, 2001, 302, 37-45.
[2] JIA Weitao, LE Qichi. Heat-transfer analysis of AZ31B Mg alloys during single pass flat rolling:Experimental verification and mathematical modeling[J]. Materials and Design, 2017, 121:288-309.
[3] TANG Yan, JIA Weitao, LIU Xuan, et al. Precipitation evolution during annealing of Mg-Li alloys[J]. Materials Science and Engineering:A, 2017, 689:332-344.
[4] LIU Jianli, YU Huijun, CHEN Chuanzhong, et al. Research and development status of laser cladding on magnesium alloys:A review[J]. Optics and Lasers in Engineering, 2017, 93:195-210.
[5] JIA Weitao, TANG Yan, LE Qichi, et al. Air-cooling analysis of AZ31B magnesium alloy plate:Experimental verification, numerical simulation and mathematical modeling[J]. Journal of Alloys and Compounds, 2017, 695:1838-1853.
[6] 丁云鹏,朱强,乐启炽,等. 镁合金热辊轧制温升效应研究[J]. 稀有金属材料与工程, 2017, 46(9):2481-2486. DING Yunpeng, ZHU Qiang, LE Qichi, et al. Temperature rise effect of AZ31B Mg alloy during rolling with heated rolls[J]. Rare Metal Materials and Engineering, 2017, 46(9):1838-1853.
[7] 丁云鹏,朱强,马庆武,等. AZ31B镁合金轧制过程中的温升效应[J]. 稀有金属材料与工程, 2017, 46(3):722-727. DING Yunpeng, ZHU Qiang, MA Qingwu, et al. Temperature rise effect of AZ31B Mg alloy during rolling[J]. Rare Metal Materials and Engineering, 2017, 46(3):722-727.
[8] 孙颖, 韩晶. 内加热轧辊对镁合金叠轧板材轧制试验的改进研究[J]. 山西冶金, 2018, 171:1-2. SUN Ying, HAN Jing. Study on the improvement of experiment of pack rolling on magnesium alloy by internal heating rollers[J]. Shanxi Metallurgy, 2018, 171:1-2.
[9] BEAUSIR Benoit, BISWAS Somjeet, KIM D I, et al. Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling[J]. Acta Materialia, 2009, 57:5061-5077.
[10] 汪凌云,黄光杰,陈林,等. 镁合金板材轧制工艺及组织性能分析[J]. 稀有金属材料与工程, 2007, 36:910-914. WANG Lingyun, HUANG Guangjie, CHEN Lin, et al. Research on rolling technology of magnesium alloy sheets[J]. Rare Metal Materials and Engineering, 2007, 36:910-914.
[11] 肖述文,王兴东,周三春,等. 导热油加热热辊压机轧辊加温过程、温度-应力耦合分析及试验研究[J]. 机械设计与制造, 2015(9):143-151. XIAO Shuwen, WANG Xingdong, ZHOU Sanchun, et al. The heating process and coupling analysis of temperature-stress and experimental study of roll of the hot press machine heated by heating oil[J]. Machinery Design and Manufacture, 2015(9):143-151.
[12] 汪琦, 李守泉. 导热油加热技术在压延机中的应用研究和传热计算分析[J]. 化工装备技术, 2008, 29(3):58-60. WANG Qi, LI Shouquan. Thermal oil heating technology in calenders applied research and heat transfer calculation analysis[J]. Chemical Equipment Technology, 2008, 29(3):58-60.
[13] 张如年,张昊,张波,等. 火焰加热烫光辊:中国, 201510164829.X[P]. 2016-11-23. ZHANG Runian, ZHANG Hao, ZHANG Bo, et al. Flame heating roller:China, 201510164829.X[P]. 2016-11-23.
[14] 加贺田翔,森永辽,桥本欣三. 感应加热辊:中国, 201710610257.2[P]. 2018-03-09. JIAHE Tianxiang, SHEN Yongliao, QIAOBEN Xinsan. Induction heating roller:China, 201710610257. 2[P]. 2018-03-09.
[15] 张晓娇,蒋浩. 轧辊加热专利技术综述[J]. 化工管理, 2015(20):183-183. ZHANG Xiaojiao, JIANG Hao. A summary of the patent technology for roll heating[J]. Chemical Management, 2015(20):183-183
[16] 张婷婷, 张春伟. 温轧机的轧辊加热方式研究[J]]. 宝钢技术, 2016(5):55-58. ZHANG Tingting, ZHANG Chunwei. Research on the heating method of the roller on the warm rolling mill[J]. Baosteel Technology, 2016(5):55-58.
[17] 李亭亭,周月明,疏达. 温轧中的轧辊感应加热及辊面温度分布模拟[J]. 金属热处理, 2016(8):166-169. LI Tingting, ZHOU Yueming, SHU Da. Simulation of induction heating and temperature distribution on roller surface during warm rolling[J]. Heat Treatmeng of Metals, 2016(8):166-169.
[18] BERGARA A, DORADO J I, MARTIN-MEIZOSO A, et al. Fatigue crack propagation in complex stress fields:Experiments and numerical simulations using the extended finite element method (XFEM)[J]. International Journal of Fatigue, 2017, 103:112-121.
[19] YAN Yinzhou, SHI Mengjie, WANG Qiang, et al. A simplified finite element model for numerical simulation of temperature field and optimization of parameters in single crystal growth by optical floating zone technique[J]. Journal of Crystal Growth, 2017, 468:923-932.
[20] SHI Ying, YAO Yupeng. Temperature field analysis of pin-on-disk sliding friction test[J]. International Journal of Heat and Mass Transfer, 2017, 107:339-346.
[21] CAI Jun, HUAI Xiulan. Study on fluid-solid coupling heat transfer in fractal porous medium by lattice Boltzmann method[J]. Applied Thermal Engineering, 2010, 30:715-723.
[22] 俞昌铭. 热传导[M]. 北京:高等教育出版社, 1983. YU Changming. Heat conduction[M]. Beijing:Higher Education Press, 1983.
[23] 杨世铭,陶文栓. 传热学[M]. 北京:高等教育出版社, 2006. YANG Shiming, TAO Wenshuan. Heat transfer[M]. Beijing:Higher Education Press, 2006.
[24] 王厚华. 传热学[M]. 重庆:重庆大学出版社, 2006. WANG Houhua. Heat transfer[M]. Chongqing:Chongqing University Press, 2006.