Study on Ignition Limit of HCCI in Micro Free-piston Engine

Abstract

Abstract: The visual experiment of homogeneous charge compression ignition (HCCI) in micro combustion chamber is carried out, some qualitative analysis is got, and multidimensional simulation model based on this experiment is built. Based on the propane combustion kinetics, the numerical calculation method for combustion process coupling with the free-piston movement is put forward, through editing the dynamic mesh subroutine in STAR-CD, the process of HCCI in the micro chamber is studied. The influence of various characteristics on micro HCCI is researched, and the compression ignition range in an ideal model is got, when the dimensionless parameter of compression ratio is not less than 55, the mixture can always be compressed ignition. The influence of gas leakage on combustion process and the variation of compression ignition limit under different leakage size are also revealed, all this research can be the basic theories for designing the micro free piston engine .

Key words: Free-piston, Homogeneous charge compression ignition (HCCI), Ignition limit, Leakage, Micro engine, Flexible Joint, Robot Joint, Variable Stiffness

CLC Number:

BAI Jin;WANG Qian;HE Zhixia;ZHANG Penggang. Study on Ignition Limit of HCCI in Micro Free-piston Engine[J]. , 2013, 49(20): 192-198.

[1]	LI Shouzhong, GUAN Yunyi, MA Chong, ZHAO Jianlong, ZHAO Hongzhe. Modeling and Experiment of Passive Variable Stiffness Actuator for Upper Limb Rehabilitation Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 47-54.
[2]	GUO Jindao, ZHAO Huan, WANG Ping, SUN Dan, WANG Shuang. Numerical and Experimental Study on Oil-air Two-phase, Eakage Flow Characteristics Based on Air-bleeding Oil-sealing Mode in Seal Clearance of Bearing Cavity [J]. Journal of Mechanical Engineering, 2024, 60(3): 214-225.
[3]	ZENG Shaoxi, ZHAO Chuntian, LI Hongmei. Response of Magnetic Flux Leakage Signal to Tensile Stress in Ferromagnetic Material [J]. Journal of Mechanical Engineering, 2024, 60(20): 68-76.
[4]	ZHANG Yongshun, LIU Gaoren, LIU Zhijun, LIU Zhenhu, DONG Hai. Decoupling Drive Mechanism of a New Type of Electromagnetic Spherical Wrist [J]. Journal of Mechanical Engineering, 2024, 60(19): 1-10.
[5]	ZHAO Ke, YE Min, WANG Ruixin, LU Hai, LIU Mengmeng, SHAO Haidong. Fuzzy Domain Adaptation Approach for Source-free Domain Rotary Machinery Fault Diagnosis [J]. Journal of Mechanical Engineering, 2024, 60(18): 43-52.
[6]	LI Yingtian, TONG Xin, CHEN Xingyu, MO Fei, SUN Zhongqing, GAO Xing, WANG Lei, ZHOU Xiaohu. Design and Evaluate a Robotic Delivery System for Adaptive Airway Stent [J]. Journal of Mechanical Engineering, 2024, 60(17): 72-79.
[7]	LIU Yue, HUANG Min, LI Yongjian, AN Qi, JIANG Jie. Research on Leakage Characteristics of Thermoplastic Labyrinth Seals on High Pressure Differential [J]. Journal of Mechanical Engineering, 2024, 60(15): 194-204.
[8]	PAN Jie, YU Jingjun, PEI Xu. Development of Flexible Gripper Mechanism Design and Variable Stiffness Technology Research [J]. Journal of Mechanical Engineering, 2024, 60(13): 281-296.
[9]	WANG Xinqing, WANG Xin, SHI Nianling, CHEN Zhaopeng. Design of Flexible Joint Controller Based on Desired Dynamics [J]. Journal of Mechanical Engineering, 2023, 59(3): 38-45.
[10]	LI Te, CUI Boyao, LIU Haibo, LI Yuxin, ZHANG Guoqing, ZENG Fanlian, WANG Yongqing. Design and Experiment of a Soft Pneumatic Actuator with Variable Stiffness by Magnetic-induced [J]. Journal of Mechanical Engineering, 2023, 59(3): 1-12.
[11]	WANG Qide, LIU Daxin, LIU Zhenyu, TAN Jianrong. A Leakage Rate Calculation Method for O-ring Seal Based on Compound Leakage Channel Model [J]. Journal of Mechanical Engineering, 2023, 59(11): 232-241.
[12]	LONG Yilin, WANG Binluan, JIN Hongzhe, XU Weiming, ZHAO Jie. Variable Stiffness Actuator and Variable Stiffness Flexible Gripper Based on Differential Gear Train [J]. Journal of Mechanical Engineering, 2023, 59(1): 91-102.
[13]	JIN Tianhe, ZHANG Zhi, LIU Zhiming, SUN Shuaishuai, YIN Liyun. Application Research on H∞ Controlled Variable Stiffness Suspension System of High-speed Train [J]. Journal of Mechanical Engineering, 2022, 58(8): 204-214.
[14]	HOU Zhang-hao, TIAN Xiao-yong, ZHU Wei-jun, LAN Hong-bo, LI Di-chen. 3D Printing and Performance of Continuous Fiber Reinforced Variable Stiffness Composite Structures [J]. Journal of Mechanical Engineering, 2022, 58(5): 170-177.
[15]	WANG Dawei, XU Jinxin, LIU Yongmeng, BAI Yang, ZENG Tao, LI Zhengkun, ZHANG Zhonghua, TAN Jiubin. Design and Application of No Inherent Force and Low Magnetic Leakage Precision Damper for Joule Balance [J]. Journal of Mechanical Engineering, 2022, 58(4): 269-276.

Study on Ignition Limit of HCCI in Micro Free-piston Engine

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments