ANALYSIS ON VARIOUS FACTORS OF RUPTURE INSTABILITY DURING CYLINDRICAL CUPS DEEP DRAWING

Abstract

Abstract: The rupture instability and its critical blank-holder force of cylindrical deep drawing in sheet forming process are theoretically and experimentally investigated. The wall of cup drawing is the common tangent region due to the punch, die profile and the clearance of them. The stress distribution of flange, die profile and wall segment are established by Mises- Hill yield function and Tresca criterion. The stress function of the crucial surface occurring rupture instability is constructed. Furthermore, the critical blank-holder force occurs rupture ins- tability is obtained. The effects of various parameters including draw ratio, strain hardening, normal anisotropy, friction coe- fficient and radial pushing force on rupture instability are showed, analyzed and discussed. During the experiment using 08Al steel sheet as workpieces hydraulic pressure is applied on the blank as blank-holder force and the periphery of the cup flange as radial pushing force. Good agreement is found between the theoretical calculations and the experimental results.

Key words: Critical blank-holder force, Deep drawing, Instability, Rupture, Sheet forming

CLC Number:

TG386.3

ZHANG Zhiyuan;ZHAO Shengdun;ZHANG Yong;WANG Ji;YUAN Jianhua. ANALYSIS ON VARIOUS FACTORS OF RUPTURE INSTABILITY DURING CYLINDRICAL CUPS DEEP DRAWING[J]. , 2007, 43(3): 154-159.

[1]	GAO Sheng, WU Jianjun, YAN Jing, ZHANG Rongxia, YU Zhongping, LIU Long. Prediction of Buckling and Deformation Law of Pipe Fittings under Free Bending Based on Energy Method [J]. Journal of Mechanical Engineering, 2024, 60(20): 162-172.
[2]	CUI Xuexi, WAN Min, WU Xiangdong, GUAN Bobin, ZHOU Bingying. Method for Determining Localized Instability Based on Strain Evolution [J]. Journal of Mechanical Engineering, 2023, 59(22): 234-244.
[3]	ZHOU Yu, FAN Zhichao, JIANG Heng, WANG Yuxuan. Modified Logistic Creep Strain Prediction Model and Its Finite Element Implementation [J]. Journal of Mechanical Engineering, 2023, 59(16): 82-89.
[4]	XIA Qinxiang, ZHANG Yilong, XIAO Gangfeng, YAN Chang. Research on Damage and Fracture Prediction of Metal Deep Drawing Spinning [J]. Journal of Mechanical Engineering, 2023, 59(10): 66-75.
[5]	ZHANG Xiaosong, CHEN Shuaifeng, LI Wang, SONG Hongwu, ZHANG Shihong, WEI Zuoshan. Study on Improving the Formability of 2B06 Aluminum Alloy Sheet by Local Hardening Effect Using Laser Heat Treatment [J]. Journal of Mechanical Engineering, 2022, 58(20): 250-259.
[6]	MENG Zhiyuan, XU Hailiang, LIU Chunzhen. Research Status and Prospect of Microgrid Stability under Pulsed Power Loads [J]. Journal of Electrical Engineering, 2022, 17(1): 2-14.
[7]	DU Bing, ZHAO Chonghao, XIE Jun, LI Han, ZHAO Changcai, DU Zhiming. Influence of Stress Loading Path on the Limit of Plastic Wrinkling and Instability of Plates and Shells [J]. Journal of Mechanical Engineering, 2021, 57(4): 83-91.
[8]	YOU Bo, LI Kunpeng, LI Jiayu, LIU Daquan. Instability Adjustment and Fault-tolerant Gait Design for Hexapod Robot Single Leg Failure [J]. Journal of Mechanical Engineering, 2021, 57(1): 100-109.
[9]	LAI Yongneng, LI Qingfeng, QIU Jianhai, YANG Jiangang. Research on the Flutter Instability Vibration of Tilting Pad Journal Bearing Considering Fluid-structure Interaction [J]. Journal of Mechanical Engineering, 2020, 56(9): 118-124.
[10]	DU Bing, SONG Pengfei, XIE Jun, ZHAO Changcai, GUAN Fenglong. Prediction of Critical Wrinkle Instability of Thin Plates by Combining Energy Method Theory with Numerical Simulation [J]. Journal of Mechanical Engineering, 2020, 56(4): 57-64.
[11]	JIANG Zhinong, ZHOU Chao, ZHANG Jinjie, LIU Wenhua, WANG Yao, SUN Xu. Research on Self-healing Control Method of Reciprocating Compressor Capacity Control Instability [J]. Journal of Mechanical Engineering, 2020, 56(22): 131-141.
[12]	GUO Peng, ZHANG Xinyan, YU Jianbo. Control of Deep Drawing Process Based on Integration of Deep Reinforcement Learning and Finite Element Method [J]. Journal of Mechanical Engineering, 2020, 56(20): 47-58.
[13]	GONG Ran, CHENG Zhigao, XU Yi, ZHANG Yudong, ZHANG He. Modeling Research on Characteristics of Two Types of Thermal Instability for Rotary Seal [J]. Journal of Mechanical Engineering, 2019, 55(9): 55-62.
[14]	LIU Wei, XU Yongchao, CHEN Yizhe, YUAN Shijian, HU Lan, ZHANG Zhichao, GUO Lijie. Mechanism and Controlling of Wrinkles during Hydroforming of Integral Thin-walled Curved Shell [J]. Journal of Mechanical Engineering, 2018, 54(9): 37-44.
[15]	CHEN Tao, CHEN Xuedong, LIU Chunjiao, QIAN Bing. Classification of Primary Carbides in Ethylene Pyrolysis Furnace Tubes and the Effects on High Temperature Rupture Performance [J]. Journal of Mechanical Engineering, 2018, 54(8): 109-116.

ANALYSIS ON VARIOUS FACTORS OF RUPTURE INSTABILITY DURING CYLINDRICAL CUPS DEEP DRAWING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments